patch-2.4.4 linux/arch/sh/kernel/irq_ipr.c

Next file: linux/arch/sh/kernel/mach_cat68701.c
Previous file: linux/arch/sh/kernel/irq_intc2.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.4.3/linux/arch/sh/kernel/irq_ipr.c linux/arch/sh/kernel/irq_ipr.c
@@ -116,14 +116,96 @@
 	disable_ipr_irq(irq);
 }
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+static unsigned char pint_map[256];
+static unsigned long portcr_mask = 0;
+
+static void enable_pint_irq(unsigned int irq);
+static void disable_pint_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_pint_irq disable_pint_irq
+
+static void mask_and_ack_pint(unsigned int);
+static void end_pint_irq(unsigned int irq);
+
+static unsigned int startup_pint_irq(unsigned int irq)
+{ 
+	enable_pint_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type pint_irq_type = {
+	"PINT-IRQ",
+	startup_pint_irq,
+	shutdown_pint_irq,
+	enable_pint_irq,
+	disable_pint_irq,
+	mask_and_ack_pint,
+	end_pint_irq
+};
+
+static void disable_pint_irq(unsigned int irq)
+{
+	unsigned long val, flags;
+
+	save_and_cli(flags);
+	val = ctrl_inw(INTC_INTER);
+	val &= ~(1 << (irq - PINT_IRQ_BASE));
+	ctrl_outw(val, INTC_INTER);	/* disable PINTn */
+	portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
+	restore_flags(flags);
+}
+
+static void enable_pint_irq(unsigned int irq)
+{
+	unsigned long val, flags;
+
+	save_and_cli(flags);
+	val = ctrl_inw(INTC_INTER);
+	val |= 1 << (irq - PINT_IRQ_BASE);
+	ctrl_outw(val, INTC_INTER);	/* enable PINTn */
+	portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
+	restore_flags(flags);
+}
+
+static void mask_and_ack_pint(unsigned int irq)
+{
+	disable_pint_irq(irq);
+}
+
+static void end_pint_irq(unsigned int irq)
+{
+	enable_pint_irq(irq);
+}
+
+void make_pint_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &pint_irq_type;
+	disable_pint_irq(irq);
+}
+#endif
+
 void __init init_IRQ(void)
 {
+	int i;
+
 	make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
 	make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
 
+#ifdef SCI_ERI_IRQ
 	make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
 	make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
 	make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
+#endif
+
+#ifdef SCIF1_ERI_IRQ
+	make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+	make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+	make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+	make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+#endif
 
 #ifdef SCIF_ERI_IRQ
 	make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
@@ -171,12 +253,30 @@
 	 * You should set corresponding bits of PFC to "00"
 	 * to enable these interrupts.
 	 */
-	make_ipr_irq(IRQ0_IRQ, IRQ0_IRP_ADDR, IRQ0_IRP_POS, IRQ0_PRIORITY);
-	make_ipr_irq(IRQ1_IRQ, IRQ1_IRP_ADDR, IRQ1_IRP_POS, IRQ1_PRIORITY);
-	make_ipr_irq(IRQ2_IRQ, IRQ2_IRP_ADDR, IRQ2_IRP_POS, IRQ2_PRIORITY);
-	make_ipr_irq(IRQ3_IRQ, IRQ3_IRP_ADDR, IRQ3_IRP_POS, IRQ3_PRIORITY);
-	make_ipr_irq(IRQ4_IRQ, IRQ4_IRP_ADDR, IRQ4_IRP_POS, IRQ4_PRIORITY);
-	make_ipr_irq(IRQ5_IRQ, IRQ5_IRP_ADDR, IRQ5_IRP_POS, IRQ5_PRIORITY);
+	make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY);
+	make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
+	make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
+	make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY);
+	make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY);
+	make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY);
+	make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY);
+	make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
+	enable_ipr_irq(PINT0_IRQ);
+	enable_ipr_irq(PINT8_IRQ);
+
+	for(i = 0; i < 16; i++)
+		make_pint_irq(PINT_IRQ_BASE + i);
+	for(i = 0; i < 256; i++)
+	{
+		if(i & 1) pint_map[i] = 0;
+		else if(i & 2) pint_map[i] = 1;
+		else if(i & 4) pint_map[i] = 2;
+		else if(i & 8) pint_map[i] = 3;
+		else if(i & 0x10) pint_map[i] = 4;
+		else if(i & 0x20) pint_map[i] = 5;
+		else if(i & 0x40) pint_map[i] = 6;
+		else if(i & 0x80) pint_map[i] = 7;
+	}
 #endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */
 
 	/* Perform the machine specific initialisation */
@@ -184,3 +284,43 @@
 		sh_mv.mv_init_irq();
 	}
 }
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+int ipr_irq_demux(int irq)
+{
+	unsigned long creg, dreg, d, sav;
+
+	if(irq == PINT0_IRQ)
+	{
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+		creg = PORT_PACR;
+		dreg = PORT_PADR;
+#else
+		creg = PORT_PCCR;
+		dreg = PORT_PCDR;
+#endif
+		sav = ctrl_inw(creg);
+		ctrl_outw(sav | portcr_mask, creg);
+		d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & ctrl_inw(INTC_INTER) & 0xff;
+		ctrl_outw(sav, creg);
+		if(d == 0) return irq;
+		return PINT_IRQ_BASE + pint_map[d];
+	}
+	else if(irq == PINT8_IRQ)
+	{
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+		creg = PORT_PBCR;
+		dreg = PORT_PBDR;
+#else
+		creg = PORT_PFCR;
+		dreg = PORT_PFDR;
+#endif
+		sav = ctrl_inw(creg);
+		ctrl_outw(sav | (portcr_mask >> 16), creg);
+		d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & (ctrl_inw(INTC_INTER) >> 8) & 0xff;
+		ctrl_outw(sav, creg);
+		if(d == 0) return irq;
+		return PINT_IRQ_BASE + 8 + pint_map[d];
+	}
+	return irq;
+}
+#endif

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)