patch-2.4.21 linux-2.4.21/drivers/ide/gayle.c

• Lines: 182
• Date: 1969-12-31 16:00:00.000000000 -0800
• Orig file: linux-2.4.20/drivers/ide/gayle.c
• Orig date: 2002-08-02 17:39:44.000000000 -0700

diff -urN linux-2.4.20/drivers/ide/gayle.c linux-2.4.21/drivers/ide/gayle.c
@@ -1,181 +0,0 @@
-/*
- *  linux/drivers/ide/gayle.c -- Amiga Gayle IDE Driver
- *
- *     Created 9 Jul 1997 by Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive for
- *  more details.
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/zorro.h>
-
-#include <asm/setup.h>
-#include <asm/amigahw.h>
-#include <asm/amigaints.h>
-#include <asm/amigayle.h>
-
-
-    /*
-     *  Bases of the IDE interfaces
-     */
-
-#define GAYLE_BASE_4000	0xdd2020	/* A4000/A4000T */
-#define GAYLE_BASE_1200	0xda0000	/* A1200/A600 */
-
-    /*
-     *  Offsets from one of the above bases
-     */
-
-#define GAYLE_DATA	0x00
-#define GAYLE_ERROR	0x06		/* see err-bits */
-#define GAYLE_NSECTOR	0x0a		/* nr of sectors to read/write */
-#define GAYLE_SECTOR	0x0e		/* starting sector */
-#define GAYLE_LCYL	0x12		/* starting cylinder */
-#define GAYLE_HCYL	0x16		/* high byte of starting cyl */
-#define GAYLE_SELECT	0x1a		/* 101dhhhh , d=drive, hhhh=head */
-#define GAYLE_STATUS	0x1e		/* see status-bits */
-#define GAYLE_CONTROL	0x101a
-
-static int gayle_offsets[IDE_NR_PORTS] __initdata = {
-    GAYLE_DATA, GAYLE_ERROR, GAYLE_NSECTOR, GAYLE_SECTOR, GAYLE_LCYL,
-    GAYLE_HCYL, GAYLE_SELECT, GAYLE_STATUS, -1, -1
-};
-
-
-    /*
-     *  These are at different offsets from the base
-     */
-
-#define GAYLE_IRQ_4000	0xdd3020	/* MSB = 1, Harddisk is source of */
-#define GAYLE_IRQ_1200	0xda9000	/* interrupt */
-
-
-    /*
-     *  Offset of the secondary port for IDE doublers
-     *  Note that GAYLE_CONTROL is NOT available then!
-     */
-
-#define GAYLE_NEXT_PORT	0x1000
-
-#ifndef CONFIG_BLK_DEV_IDEDOUBLER
-#define GAYLE_NUM_HWIFS		1
-#define GAYLE_NUM_PROBE_HWIFS	GAYLE_NUM_HWIFS
-#define GAYLE_HAS_CONTROL_REG	1
-#define GAYLE_IDEREG_SIZE	0x2000
-#else /* CONFIG_BLK_DEV_IDEDOUBLER */
-#define GAYLE_NUM_HWIFS		2
-#define GAYLE_NUM_PROBE_HWIFS	(ide_doubler ? GAYLE_NUM_HWIFS : \
-					       GAYLE_NUM_HWIFS-1)
-#define GAYLE_HAS_CONTROL_REG	(!ide_doubler)
-#define GAYLE_IDEREG_SIZE	(ide_doubler ? 0x1000 : 0x2000)
-int ide_doubler = 0;	/* support IDE doublers? */
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-
-
-    /*
-     *  Check and acknowledge the interrupt status
-     */
-
-static int gayle_ack_intr_a4000(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
-    return 1;
-}
-
-static int gayle_ack_intr_a1200(ide_hwif_t *hwif)
-{
-    unsigned char ch;
-
-    ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
-    if (!(ch & GAYLE_IRQ_IDE))
-	return 0;
-    (void)z_readb(hwif->io_ports[IDE_STATUS_OFFSET]);
-    z_writeb(0x7c, hwif->io_ports[IDE_IRQ_OFFSET]);
-    return 1;
-}
-
-    /*
-     *  Probe for a Gayle IDE interface (and optionally for an IDE doubler)
-     */
-
-void __init gayle_init(void)
-{
-    int a4000, i;
-
-    if (!MACH_IS_AMIGA)
-	return;
-
-    if (!(a4000 = AMIGAHW_PRESENT(A4000_IDE)) && !AMIGAHW_PRESENT(A1200_IDE))
-	return;
-
-    for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) {
-	ide_ioreg_t base, ctrlport, irqport;
-	ide_ack_intr_t *ack_intr;
-	hw_regs_t hw;
-	int index;
-	unsigned long phys_base, res_start, res_n;
-
-	if (a4000) {
-	    phys_base = GAYLE_BASE_4000;
-	    irqport = (ide_ioreg_t)ZTWO_VADDR(GAYLE_IRQ_4000);
-	    ack_intr = gayle_ack_intr_a4000;
-	} else {
-	    phys_base = GAYLE_BASE_1200;
-	    irqport = (ide_ioreg_t)ZTWO_VADDR(GAYLE_IRQ_1200);
-	    ack_intr = gayle_ack_intr_a1200;
-	}
-	phys_base += i*GAYLE_NEXT_PORT;
-
-	res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1);
-	res_n = GAYLE_IDEREG_SIZE;
-
-	if (!request_mem_region(res_start, res_n, "IDE"))
-	    continue;
-
-	base = (ide_ioreg_t)ZTWO_VADDR(phys_base);
-	ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0;
-
-	ide_setup_ports(&hw, base, gayle_offsets,
-			ctrlport, irqport, ack_intr, IRQ_AMIGA_PORTS);
-
-	index = ide_register_hw(&hw, NULL);
-	if (index != -1) {
-	    switch (i) {
-		case 0:
-		    printk("ide%d: Gayle IDE interface (A%d style)\n", index,
-			   a4000 ? 4000 : 1200);
-		    break;
-#ifdef CONFIG_BLK_DEV_IDEDOUBLER
-		case 1:
-		    printk("ide%d: IDE doubler\n", index);
-		    break;
-#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
-	    }
-	} else
-	    release_mem_region(res_start, res_n);
-
-#if 1 /* TESTING */
-	if (i == 1) {
-	    volatile u_short *addr = (u_short *)base;
-	    u_short data;
-	    printk("+++ Probing for IDE doubler... ");
-	    *addr = 0xffff;
-	    data = *addr;
-	    printk("probe returned 0x%02x (PLEASE REPORT THIS!!)\n", data);
-	}
-#endif /* TESTING */
-    }
-}