patch-2.4.14 linux/drivers/ide/buddha.c
Next file: linux/drivers/ide/falconide.c
Previous file: linux/drivers/ide/ataraid.c
Back to the patch index
Back to the overall index
- Lines: 241
- Date:
Thu Oct 25 13:53:47 2001
- Orig file:
v2.4.13/linux/drivers/ide/buddha.c
- Orig date:
Sun Sep 23 11:40:57 2001
diff -u --recursive --new-file v2.4.13/linux/drivers/ide/buddha.c linux/drivers/ide/buddha.c
@@ -1,9 +1,11 @@
/*
- * linux/drivers/ide/buddha.c -- Amiga Buddha and Catweasel IDE Driver
+ * linux/drivers/ide/buddha.c -- Amiga Buddha, Catweasel and X-Surf IDE Driver
*
* Copyright (C) 1997 by Geert Uytterhoeven
*
- * This driver was written by based on the specifications in README.buddha.
+ * This driver was written by based on the specifications in README.buddha and
+ * the X-Surf info from Inside_XSurf.txt available at
+ * http://www.jschoenfeld.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
@@ -28,12 +30,12 @@
/*
- * The Buddha has 2 IDE interfaces, the Catweasel has 3
+ * The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
*/
#define BUDDHA_NUM_HWIFS 2
#define CATWEASEL_NUM_HWIFS 3
-
+#define XSURF_NUM_HWIFS 2
/*
* Bases of the IDE interfaces (relative to the board address)
@@ -43,10 +45,17 @@
#define BUDDHA_BASE2 0xa00
#define BUDDHA_BASE3 0xc00
+#define XSURF_BASE1 0xb000 /* 2.5" Interface */
+#define XSURF_BASE2 0xd000 /* 3.5" Interface */
+
static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
};
+static const u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
+ XSURF_BASE1, XSURF_BASE2
+};
+
/*
* Offsets from one of the above bases
@@ -61,12 +70,17 @@
#define BUDDHA_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
#define BUDDHA_STATUS 0x1e /* see status-bits */
#define BUDDHA_CONTROL 0x11a
+#define XSURF_CONTROL -1 /* X-Surf has no CS1* (Control/AltStat) */
static int buddha_offsets[IDE_NR_PORTS] __initdata = {
BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
- BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL
+ BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL, -1
};
+static int xsurf_offsets[IDE_NR_PORTS] __initdata = {
+ BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
+ BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, XSURF_CONTROL, -1
+};
/*
* Other registers
@@ -76,10 +90,17 @@
#define BUDDHA_IRQ2 0xf40 /* interrupt */
#define BUDDHA_IRQ3 0xf80
+#define XSURF_IRQ1 0x7e
+#define XSURF_IRQ2 0x7e
+
static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
};
+static const int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
+ XSURF_IRQ1, XSURF_IRQ2
+};
+
#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
@@ -87,8 +108,8 @@
* Board information
*/
-static u_long buddha_board;
-static int buddha_num_hwifs = -1;
+enum BuddhaType_Enum {BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF};
+typedef enum BuddhaType_Enum BuddhaType;
/*
@@ -99,64 +120,100 @@
{
unsigned char ch;
- ch = inb(hwif->io_ports[IDE_IRQ_OFFSET]);
+ ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
if (!(ch & 0x80))
- return 0;
+ return 0;
return 1;
}
-
- /*
- * Any Buddha or Catweasel boards present?
- */
-
-static int __init find_buddha(void)
+static int xsurf_ack_intr(ide_hwif_t *hwif)
{
- struct zorro_dev *z = NULL;
+ unsigned char ch;
- buddha_num_hwifs = 0;
- while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
- unsigned long board;
- if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA)
- buddha_num_hwifs = BUDDHA_NUM_HWIFS;
- else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL)
- buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
- else
- continue;
- board = z->resource.start;
- if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
- continue;
- buddha_board = ZTWO_VADDR(board);
- /* write to BUDDHA_IRQ_MR to enable the board IRQ */
- *(char *)(buddha_board+BUDDHA_IRQ_MR) = 0;
- break;
- }
- return buddha_num_hwifs;
+ ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
+ /* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
+ z_writeb(0, hwif->io_ports[IDE_IRQ_OFFSET]);
+ if (!(ch & 0x80))
+ return 0;
+ return 1;
}
-
/*
* Probe for a Buddha or Catweasel IDE interface
- * We support only _one_ of them, no multiple boards!
*/
void __init buddha_init(void)
{
- hw_regs_t hw;
- int i, index;
-
- if (buddha_num_hwifs < 0 && !find_buddha())
- return;
+ hw_regs_t hw;
+ int i, index;
- for (i = 0; i < buddha_num_hwifs; i++) {
- ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+buddha_bases[i]),
- buddha_offsets, 0,
- (ide_ioreg_t)(buddha_board+buddha_irqports[i]),
- buddha_ack_intr, IRQ_AMIGA_PORTS);
- index = ide_register_hw(&hw, NULL);
- if (index != -1)
- printk("ide%d: %s IDE interface\n", index,
- buddha_num_hwifs == BUDDHA_NUM_HWIFS ? "Buddha" :
- "Catweasel");
- }
+ struct zorro_dev *z = NULL;
+ u_long buddha_board = 0;
+ BuddhaType type;
+ int buddha_num_hwifs;
+
+ while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
+ unsigned long board;
+ if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
+ buddha_num_hwifs = BUDDHA_NUM_HWIFS;
+ type=BOARD_BUDDHA;
+ } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
+ buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
+ type=BOARD_CATWEASEL;
+ } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
+ buddha_num_hwifs = XSURF_NUM_HWIFS;
+ type=BOARD_XSURF;
+ } else
+ continue;
+
+ board = z->resource.start;
+
+ if(type != BOARD_XSURF) {
+ if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
+ continue;
+ } else {
+ if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
+ continue;
+ if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
+ continue;
+ if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE"))
+ continue;
+ }
+ buddha_board = ZTWO_VADDR(board);
+
+ /* write to BUDDHA_IRQ_MR to enable the board IRQ */
+ /* X-Surf doesn't have this. IRQs are always on */
+ if(type != BOARD_XSURF) *(char *)(buddha_board+BUDDHA_IRQ_MR) = 0;
+
+ for(i=0;i<buddha_num_hwifs;i++) {
+ if(type != BOARD_XSURF) {
+ ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+buddha_bases[i]),
+ buddha_offsets, 0,
+ (ide_ioreg_t)(buddha_board+buddha_irqports[i]),
+ buddha_ack_intr, IRQ_AMIGA_PORTS);
+ } else {
+ ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+xsurf_bases[i]),
+ xsurf_offsets, 0,
+ (ide_ioreg_t)(buddha_board+xsurf_irqports[i]),
+ xsurf_ack_intr, IRQ_AMIGA_PORTS);
+ }
+
+ index = ide_register_hw(&hw, NULL);
+ if (index != -1) {
+ printk("ide%d: ", index);
+ switch(type) {
+ case BOARD_BUDDHA:
+ printk("Buddha");
+ break;
+ case BOARD_CATWEASEL:
+ printk("Catweasel");
+ break;
+ case BOARD_XSURF:
+ printk("X-Surf");
+ break;
+ }
+ printk(" IDE interface\n");
+ }
+ }
+ }
}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)