patch-2.3.48 linux/drivers/block/ide-probe.c
Next file: linux/drivers/block/ide-proc.c
Previous file: linux/drivers/block/ide-pci.c
Back to the patch index
Back to the overall index
- Lines: 197
- Date:
Sat Feb 26 20:32:13 2000
- Orig file:
v2.3.47/linux/drivers/block/ide-probe.c
- Orig date:
Sun Feb 20 21:12:38 2000
diff -u --recursive --new-file v2.3.47/linux/drivers/block/ide-probe.c linux/drivers/block/ide-probe.c
@@ -1,5 +1,5 @@
/*
- * linux/drivers/block/ide-probe.c Version 1.05 July 3, 1999
+ * linux/drivers/block/ide-probe.c Version 1.05 July 3, 1999
*
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
*/
@@ -57,7 +57,7 @@
ide__sti(); /* local CPU only */
ide_fix_driveid(id);
if (!drive->forced_lun)
- drive->last_lun = id->word126 & 0x7;
+ drive->last_lun = id->last_lun & 0x7;
#if defined (CONFIG_SCSI_EATA_DMA) || defined (CONFIG_SCSI_EATA_PIO) || defined (CONFIG_SCSI_EATA)
/*
* EATA SCSI controllers do a hardware ATA emulation:
@@ -395,6 +395,56 @@
}
/*
+ * Calculate the region that this interface occupies,
+ * handling interfaces where the registers may not be
+ * ordered sanely. We deal with the CONTROL register
+ * separately.
+ */
+static int hwif_check_regions (ide_hwif_t *hwif)
+{
+ int region_errors = 0;
+
+ region_errors = ide_check_region(hwif->io_ports[IDE_DATA_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_ERROR_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_NSECTOR_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_SECTOR_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_LCYL_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_HCYL_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_SELECT_OFFSET], 1);
+ region_errors += ide_check_region(hwif->io_ports[IDE_STATUS_OFFSET], 1);
+ if (hwif->io_ports[IDE_CONTROL_OFFSET])
+ region_errors += ide_check_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1);
+ if (hwif->io_ports[IDE_IRQ_OFFSET])
+ region_errors += ide_check_region(hwif->io_ports[IDE_IRQ_OFFSET], 1);
+
+ return(region_errors);
+}
+
+static void hwif_register (ide_hwif_t *hwif)
+{
+ if (hwif->io_ports[IDE_DATA_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_DATA_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_ERROR_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_ERROR_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_NSECTOR_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_NSECTOR_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_SECTOR_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_SECTOR_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_LCYL_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_LCYL_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_HCYL_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_HCYL_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_SELECT_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_SELECT_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_STATUS_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_STATUS_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_CONTROL_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_CONTROL_OFFSET], 1, hwif->name);
+ if (hwif->io_ports[IDE_IRQ_OFFSET])
+ ide_request_region(hwif->io_ports[IDE_IRQ_OFFSET], 1, hwif->name);
+}
+
+/*
* This routine only knows how to look for drive units 0 and 1
* on an interface, so any setting of MAX_DRIVES > 2 won't work here.
*/
@@ -403,12 +453,6 @@
unsigned int unit;
unsigned long flags;
- ide_ioreg_t ide_control_reg = hwif->io_ports[IDE_CONTROL_OFFSET];
- ide_ioreg_t region_low = hwif->io_ports[IDE_DATA_OFFSET];
- ide_ioreg_t region_high = region_low;
- unsigned int region_request = 8;
- int i;
-
if (hwif->noprobe)
return;
if (hwif->io_ports[IDE_DATA_OFFSET] == HD_DATA) {
@@ -417,30 +461,11 @@
probe_cmos_for_drives (hwif);
}
- /*
- * Calculate the region that this interface occupies,
- * handling interfaces where the registers may not be
- * ordered sanely. We deal with the CONTROL register
- * separately.
- */
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
- if (hwif->io_ports[i]) {
- if (hwif->io_ports[i] < region_low)
- region_low = hwif->io_ports[i];
- if (hwif->io_ports[i] > region_high)
- region_high = hwif->io_ports[i];
- }
- }
- region_request = (region_high - region_low);
- if (region_request == 0x0007)
- region_request++;
if ((hwif->chipset != ide_4drives || !hwif->mate->present) &&
#if CONFIG_BLK_DEV_PDC4030
(hwif->chipset != ide_pdc4030 || hwif->channel == 0) &&
#endif /* CONFIG_BLK_DEV_PDC4030 */
- (ide_check_region(region_low, region_request) ||
- (ide_control_reg && ide_check_region(ide_control_reg,1))))
- {
+ (hwif_check_regions(hwif))) {
int msgout = 0;
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
@@ -467,20 +492,18 @@
if (drive->present && !hwif->present) {
hwif->present = 1;
if (hwif->chipset != ide_4drives || !hwif->mate->present) {
- ide_request_region(region_low, region_request, hwif->name);
- if (ide_control_reg)
- ide_request_region(ide_control_reg, 1, hwif->name);
+ hwif_register(hwif);
}
}
}
- if (ide_control_reg && hwif->reset) {
+ if (hwif->io_ports[IDE_CONTROL_OFFSET] && hwif->reset) {
unsigned long timeout = jiffies + WAIT_WORSTCASE;
byte stat;
printk("%s: reset\n", hwif->name);
- OUT_BYTE(12, ide_control_reg);
+ OUT_BYTE(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
udelay(10);
- OUT_BYTE(8, ide_control_reg);
+ OUT_BYTE(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
do {
ide_delay_50ms();
stat = IN_BYTE(hwif->io_ports[IDE_STATUS_OFFSET]);
@@ -594,7 +617,11 @@
* Allocate the irq, if not already obtained for another hwif
*/
if (!match || match->irq != hwif->irq) {
+#ifdef CONFIG_IDEPCI_SHARE_IRQ
+ int sa = (hwif->chipset == ide_pci) ? SA_SHIRQ : SA_INTERRUPT;
+#else /* !CONFIG_IDEPCI_SHARE_IRQ */
int sa = (hwif->chipset == ide_pci) ? SA_INTERRUPT|SA_SHIRQ : SA_INTERRUPT;
+#endif /* CONFIG_IDEPCI_SHARE_IRQ */
if (ide_request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwgroup)) {
if (!match)
kfree(hwgroup);
@@ -784,20 +811,18 @@
return (hwif->present = 0);
}
- if (init_irq (hwif)) {
+ if (init_irq(hwif)) {
int i = hwif->irq;
/*
* It failed to initialise. Find the default IRQ for
* this port and try that.
*/
- if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET])))
- {
+ if (!(hwif->irq = ide_default_irq(hwif->io_ports[IDE_DATA_OFFSET]))) {
printk("%s: Disabled unable to get IRQ %d.\n", hwif->name, i);
(void) unregister_blkdev (hwif->major, hwif->name);
return (hwif->present = 0);
}
- if(init_irq (hwif))
- {
+ if (init_irq(hwif)) {
printk("%s: probed IRQ %d and default IRQ %d failed.\n",
hwif->name, i, hwif->irq);
(void) unregister_blkdev (hwif->major, hwif->name);
@@ -863,7 +888,8 @@
for (index = 0; index < MAX_HWIFS; ++index)
if (probe[index])
hwif_init(&ide_hwifs[index]);
- ide_register_module(&ideprobe_module);
+ if (!ide_probe)
+ ide_probe = &ideprobe_module;
MOD_DEC_USE_COUNT;
return 0;
}
@@ -882,6 +908,6 @@
void cleanup_module (void)
{
- ide_unregister_module(&ideprobe_module);
+ ide_probe = NULL;
}
#endif /* MODULE */
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)