patch-2.3.10 linux/drivers/char/saa7111.c
Next file: linux/drivers/char/saa7185.c
Previous file: linux/drivers/char/rocket.c
Back to the patch index
Back to the overall index
- Lines: 422
- Date:
Mon Jul 5 20:07:02 1999
- Orig file:
v2.3.9/linux/drivers/char/saa7111.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.3.9/linux/drivers/char/saa7111.c linux/drivers/char/saa7111.c
@@ -0,0 +1,421 @@
+/*
+ saa7111 - Philips SAA7111A video decoder driver version 0.0.3
+
+ Copyright (C) 1998 Dave Perks <dperks@ibm.net>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/malloc.h>
+#include <linux/mm.h>
+#include <linux/pci.h>
+#include <linux/signal.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+#include <linux/types.h>
+#include <linux/wrapper.h>
+
+#include <linux/videodev.h>
+#include <linux/version.h>
+#include <asm/uaccess.h>
+
+#include <linux/i2c.h>
+#include <linux/video_decoder.h>
+
+#define DEBUG(x) /* Debug driver */
+
+/* ----------------------------------------------------------------------- */
+
+struct saa7111 {
+ struct i2c_bus *bus;
+ int addr;
+ unsigned char reg[32];
+
+ int norm;
+ int input;
+ int enable;
+ int bright;
+ int contrast;
+ int hue;
+ int sat;
+};
+
+#define I2C_SAA7111 0x48
+
+#define I2C_DELAY 10
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7111_write(struct saa7111 *dev, unsigned char subaddr, unsigned char data)
+{
+ int ack;
+ unsigned long flags;
+
+ LOCK_I2C_BUS(dev->bus);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
+ i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
+ ack = i2c_sendbyte(dev->bus, data, I2C_DELAY);
+ dev->reg[subaddr] = data;
+ i2c_stop(dev->bus);
+ UNLOCK_I2C_BUS(dev->bus);
+ return ack;
+}
+
+static int saa7111_write_block(struct saa7111 *dev, unsigned const char *data, unsigned int len)
+{
+ int ack;
+ unsigned subaddr;
+ unsigned long flags;
+
+ while (len > 1) {
+ LOCK_I2C_BUS(dev->bus);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
+ ack = i2c_sendbyte(dev->bus, (subaddr = *data++), I2C_DELAY);
+ ack = i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++), I2C_DELAY);
+ len -= 2;
+ while (len > 1 && *data == ++subaddr) {
+ data++;
+ ack = i2c_sendbyte(dev->bus, (dev->reg[subaddr] = *data++), I2C_DELAY);
+ len -= 2;
+ }
+ i2c_stop(dev->bus);
+ UNLOCK_I2C_BUS(dev->bus);
+ }
+ return ack;
+}
+
+static int saa7111_read(struct saa7111 *dev, unsigned char subaddr)
+{
+ int data;
+ unsigned long flags;
+
+ LOCK_I2C_BUS(dev->bus);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr, I2C_DELAY);
+ i2c_sendbyte(dev->bus, subaddr, I2C_DELAY);
+ i2c_start(dev->bus);
+ i2c_sendbyte(dev->bus, dev->addr | 1, I2C_DELAY);
+ data = i2c_readbyte(dev->bus, 1);
+ i2c_stop(dev->bus);
+ UNLOCK_I2C_BUS(dev->bus);
+ return data;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int saa7111_attach(struct i2c_device *device)
+{
+ int i;
+ struct saa7111 *decoder;
+
+ static const unsigned char init[] =
+ {
+ 0x00, 0x00, /* 00 - ID byte */
+ 0x01, 0x00, /* 01 - reserved */
+
+ /*front end */
+ 0x02, 0xd0, /* 02 - FUSE=3, GUDL=2, MODE=0 */
+ 0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0, HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */
+ 0x04, 0x00, /* 04 - GAI1=256 */
+ 0x05, 0x00, /* 05 - GAI2=256 */
+
+ /* decoder */
+ 0x06, 0xf6, /* 06 - HSB at 13(50Hz) / 17(60Hz) pixels after end of last line */
+ 0x07, 0xdd, /* 07 - HSS at 113(50Hz) / 117(60Hz) pixels after end of last line */
+ 0x08, 0xc8, /* 08 - AUFD=1, FSEL=1, EXFIL=0, VTRC=1, HPLL=0, VNOI=0 */
+ 0x09, 0x01, /* 09 - BYPS=0, PREF=0, BPSS=0, VBLB=0, UPTCV=0, APER=1 */
+ 0x0a, 0x80, /* 0a - BRIG=128 */
+ 0x0b, 0x47, /* 0b - CONT=1.109 */
+ 0x0c, 0x40, /* 0c - SATN=1.0 */
+ 0x0d, 0x00, /* 0d - HUE=0 */
+ 0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0, FCTC=0, CHBW=1 */
+ 0x0f, 0x00, /* 0f - reserved */
+ 0x10, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
+ 0x11, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1, OEYC=1, OEHV=1, VIPB=0, COLO=0 */
+ 0x12, 0x00, /* 12 - output control 2 */
+ 0x13, 0x00, /* 13 - output control 3 */
+ 0x14, 0x00, /* 14 - reserved */
+ 0x15, 0x00, /* 15 - VBI */
+ 0x16, 0x00, /* 16 - VBI */
+ 0x17, 0x00, /* 17 - VBI */
+ };
+
+ device->data = decoder = kmalloc(sizeof(struct saa7111), GFP_KERNEL);
+ if (decoder == NULL) {
+ return -ENOMEM;
+ }
+ MOD_INC_USE_COUNT;
+
+ memset(decoder, 0, sizeof(struct saa7111));
+ strcpy(device->name, "saa7111");
+ decoder->bus = device->bus;
+ decoder->addr = device->addr;
+ decoder->norm = VIDEO_MODE_NTSC;
+ decoder->input = 0;
+ decoder->enable = 1;
+ decoder->bright = 32768;
+ decoder->contrast = 32768;
+ decoder->hue = 32768;
+ decoder->sat = 32768;
+
+ i = saa7111_write_block(decoder, init, sizeof(init));
+ if (i < 0) {
+ printk(KERN_ERR "%s_attach: init status %d\n", device->name, i);
+ } else {
+ printk(KERN_INFO "%s_attach: chip version %x\n", device->name, saa7111_read(decoder, 0x00));
+ }
+ return 0;
+}
+
+
+static int saa7111_detach(struct i2c_device *device)
+{
+ kfree(device->data);
+ MOD_DEC_USE_COUNT;
+ return 0;
+}
+
+static int saa7111_command(struct i2c_device *device, unsigned int cmd, void *arg)
+{
+ struct saa7111 *decoder = device->data;
+
+ switch (cmd) {
+
+#if defined(DECODER_DUMP)
+ case DECODER_DUMP:
+ {
+ int i;
+
+ for (i = 0; i < 32; i += 16) {
+ int j;
+
+ printk("KERN_DEBUG %s: %03x", device->name, i);
+ for (j = 0; j < 16; ++j) {
+ printk(" %02x", saa7111_read(decoder, i + j));
+ }
+ printk("\n");
+ }
+ }
+ break;
+#endif /* defined(DECODER_DUMP) */
+
+ case DECODER_GET_CAPABILITIES:
+ {
+ struct video_decoder_capability *cap = arg;
+
+ cap->flags
+ = VIDEO_DECODER_PAL
+ | VIDEO_DECODER_NTSC
+ | VIDEO_DECODER_AUTO
+ | VIDEO_DECODER_CCIR;
+ cap->inputs = 8;
+ cap->outputs = 1;
+ }
+ break;
+
+ case DECODER_GET_STATUS:
+ {
+ int *iarg = arg;
+ int status;
+ int res;
+
+ status = saa7111_read(decoder, 0x1f);
+ res = 0;
+ if ((status & (1 << 6)) == 0) {
+ res |= DECODER_STATUS_GOOD;
+ }
+ switch (decoder->norm) {
+ case VIDEO_MODE_NTSC:
+ res |= DECODER_STATUS_NTSC;
+ break;
+ case VIDEO_MODE_PAL:
+ res |= DECODER_STATUS_PAL;
+ break;
+ default:
+ case VIDEO_MODE_AUTO:
+ if ((status & (1 << 5)) != 0) {
+ res |= DECODER_STATUS_NTSC;
+ } else {
+ res |= DECODER_STATUS_PAL;
+ }
+ break;
+ }
+ if ((status & (1 << 0)) != 0) {
+ res |= DECODER_STATUS_COLOR;
+ }
+ *iarg = res;
+ }
+ break;
+
+ case DECODER_SET_NORM:
+ {
+ int *iarg = arg;
+
+ switch (*iarg) {
+
+ case VIDEO_MODE_NTSC:
+ saa7111_write(decoder, 0x08, (decoder->reg[0x08] & 0x3f) | 0x40);
+ break;
+
+ case VIDEO_MODE_PAL:
+ saa7111_write(decoder, 0x08, (decoder->reg[0x08] & 0x3f) | 0x00);
+ break;
+
+ case VIDEO_MODE_AUTO:
+ saa7111_write(decoder, 0x08, (decoder->reg[0x08] & 0x3f) | 0x80);
+ break;
+
+ default:
+ return -EINVAL;
+
+ }
+ decoder->norm = *iarg;
+ }
+ break;
+
+ case DECODER_SET_INPUT:
+ {
+ int *iarg = arg;
+
+ if (*iarg < 0 || *iarg > 7) {
+ return -EINVAL;
+ }
+ if (decoder->input != *iarg) {
+ decoder->input = *iarg;
+ /* select mode */
+ saa7111_write(decoder, 0x02, (decoder->reg[0x02] & 0xf8) | decoder->input);
+ /* bypass chrominance trap for modes 4..7 */
+ saa7111_write(decoder, 0x09, (decoder->reg[0x09] & 0x7f) | ((decoder->input > 3) ? 0x80 : 0));
+ }
+ }
+ break;
+
+ case DECODER_SET_OUTPUT:
+ {
+ int *iarg = arg;
+
+ /* not much choice of outputs */
+ if (*iarg != 0) {
+ return -EINVAL;
+ }
+ }
+ break;
+
+ case DECODER_ENABLE_OUTPUT:
+ {
+ int *iarg = arg;
+ int enable = (*iarg != 0);
+
+ if (decoder->enable != enable) {
+ decoder->enable = enable;
+
+// RJ: If output should be disabled (for playing videos), we also need a open PLL.
+ // The input is set to 0 (where no input source is connected), although this
+ // is not necessary.
+ //
+ // If output should be enabled, we have to reverse the above.
+
+ if (decoder->enable) {
+ saa7111_write(decoder, 0x02, (decoder->reg[0x02] & 0xf8) | decoder->input);
+ saa7111_write(decoder, 0x08, (decoder->reg[0x08] & 0xfb));
+ saa7111_write(decoder, 0x11, (decoder->reg[0x11] & 0xf3) | 0x0c);
+ } else {
+ saa7111_write(decoder, 0x02, (decoder->reg[0x02] & 0xf8));
+ saa7111_write(decoder, 0x08, (decoder->reg[0x08] & 0xfb) | 0x04);
+ saa7111_write(decoder, 0x11, (decoder->reg[0x11] & 0xf3));
+ }
+ }
+ }
+ break;
+
+ case DECODER_SET_PICTURE:
+ {
+ struct video_picture *pic = arg;
+
+ if (decoder->bright != pic->brightness) {
+ /* We want 0 to 255 we get 0-65535 */
+ decoder->bright = pic->brightness;
+ saa7111_write(decoder, 0x0a, decoder->bright >> 8);
+ }
+ if (decoder->contrast != pic->contrast) {
+ /* We want 0 to 127 we get 0-65535 */
+ decoder->contrast = pic->contrast;
+ saa7111_write(decoder, 0x0b, decoder->contrast >> 9);
+ }
+ if (decoder->sat != pic->colour) {
+ /* We want 0 to 127 we get 0-65535 */
+ decoder->sat = pic->colour;
+ saa7111_write(decoder, 0x0c, decoder->sat >> 9);
+ }
+ if (decoder->hue != pic->hue) {
+ /* We want -128 to 127 we get 0-65535 */
+ decoder->hue = pic->hue;
+ saa7111_write(decoder, 0x0d, (decoder->hue - 32768) >> 8);
+ }
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+struct i2c_driver i2c_driver_saa7111 =
+{
+ "saa7111", /* name */
+ I2C_DRIVERID_VIDEODECODER, /* ID */
+ I2C_SAA7111, I2C_SAA7111 + 1,
+
+ saa7111_attach,
+ saa7111_detach,
+ saa7111_command
+};
+
+EXPORT_NO_SYMBOLS;
+
+#ifdef MODULE
+int init_module(void)
+#else
+int saa7111_init(void)
+#endif
+{
+ return i2c_register_driver(&i2c_driver_saa7111);
+}
+
+
+
+#ifdef MODULE
+
+void cleanup_module(void)
+{
+ i2c_unregister_driver(&i2c_driver_saa7111);
+}
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)