Web Authorization Protocol A. Parecki Internet-Draft Okta Intended status: Standards Track K. McGuinness Expires: 23 April 2025 Independent 20 October 2024 Identity Assertion Authorization Grant draft-parecki-oauth-identity-assertion-authz-grant-02 Abstract This specification provides a mechanism for an application to use an identity assertion to obtain an access token for a third-party API using Token Exchange [RFC8693] and JWT Profile for OAuth 2.0 Authorization Grants [RFC7523]. About This Document This note is to be removed before publishing as an RFC. The latest revision of this draft can be found at https://drafts.aaronpk.com/draft-parecki-oauth-identity-assertion- authz-grant/draft-parecki-oauth-identity-assertion-authz-grant.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-parecki-oauth-identity- assertion-authz-grant/. Discussion of this document takes place on the Web Authorization Protocol Working Group mailing list (mailto:oauth@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/oauth/. Subscribe at https://www.ietf.org/mailman/listinfo/oauth/. Source for this draft and an issue tracker can be found at https://github.com/aaronpk/draft-parecki-oauth-identity-assertion- authz-grant. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Parecki & McGuinness Expires 23 April 2025 [Page 1] Internet-Draft ID Token Authz Grant October 2024 Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 23 April 2025. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Conventions and Definitions . . . . . . . . . . . . . . . . . 3 2.1. Roles . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4. User Authentication . . . . . . . . . . . . . . . . . . . . . 6 5. Token Exchange . . . . . . . . . . . . . . . . . . . . . . . 7 5.1. Processing Rules . . . . . . . . . . . . . . . . . . . . 8 5.2. Response . . . . . . . . . . . . . . . . . . . . . . . . 8 5.2.1. Error Response . . . . . . . . . . . . . . . . . . . 9 5.3. Identity Assertion Authorization Grant JWT . . . . . . . 9 6. Access Token Request . . . . . . . . . . . . . . . . . . . . 11 6.1. Processing Rules . . . . . . . . . . . . . . . . . . . . 11 6.2. Response . . . . . . . . . . . . . . . . . . . . . . . . 12 7. Security Considerations . . . . . . . . . . . . . . . . . . . 12 7.1. Client Authentication . . . . . . . . . . . . . . . . . . 12 7.2. Step-Up Authentication . . . . . . . . . . . . . . . . . 12 7.3. Cross-Domain Use . . . . . . . . . . . . . . . . . . . . 13 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13 8.1. Media Types . . . . . . . . . . . . . . . . . . . . . . . 13 8.2. OAuth URI Registration . . . . . . . . . . . . . . . . . 13 9. References . . . . . . . . . . . . . . . . . . . . . . . . . 13 9.1. Normative References . . . . . . . . . . . . . . . . . . 13 9.2. Informative References . . . . . . . . . . . . . . . . . 15 Appendix A. Use Cases . . . . . . . . . . . . . . . . . . . . . 15 A.1. Enterprise Deployment . . . . . . . . . . . . . . . . . . 15 Parecki & McGuinness Expires 23 April 2025 [Page 2] Internet-Draft ID Token Authz Grant October 2024 A.1.1. Preconditions . . . . . . . . . . . . . . . . . . . . 16 A.2. Email and Calendaring Applications . . . . . . . . . . . 16 A.2.1. Preconditions . . . . . . . . . . . . . . . . . . . . 16 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 17 Document History . . . . . . . . . . . . . . . . . . . . . . . . 17 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 17 1. Introduction The draft specification Identity Chaining Across Trust Domains [I-D.ietf-oauth-identity-chaining] defines how to request a JWT authorization grant from an Authorization Server and exchange it for an Access Token at another Authorization Server in a different trust domain. The specification is an application of a combination of OAuth 2.0 Token Exchange [RFC8693] and JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants [RFC7523]. The draft supports multiple different use cases by leaving many details of the token exchange request and JWT authorization grant unspecified. This specification defines the additional details necessary to support interoperable implementations when using identity tokens as the input to the token exchange request. This specification assumes that there is a single authorization server that is trusted by two applications in different trust domains, as typically found in an enterprise scenario where the two applications allow users to log in using the same enterprise identity provider. The same enterprise identity provider that is trusted by applications for single sign-on can be extended to broker access to APIs as well. 2. Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2.1. Roles Client Application that wants to obtain an OAuth 2.0 access token on behalf of a signed-in user to an external/3rd party application's API (Resource Server below). In [I-D.ietf-oauth-identity-chaining], this is the Client in trust domain A. Resource Application Application that provides an OAuth 2.0 Parecki & McGuinness Expires 23 April 2025 [Page 3] Internet-Draft ID Token Authz Grant October 2024 Protected Resource. In [I-D.ietf-oauth-identity-chaining], this is the Protected Resource in trust domain B. Authorization Server (IdP) The Identity Provider that is trusted by a set of applications in an organization's app ecosystem. In [I-D.ietf-oauth-identity-chaining], this is the Authorization Server in trust domain A, which is also trusted by the Authorization Server of the Protected Resource in trust domain B. 3. Overview The example flow is for an enterprise acme, which uses a wiki app and chat app from different vendors, both of which are integrated into the enterprise's Identity Provider using OpenID Connect. +===========+====================+=========================+=============+ |Role |App URL |Tenant URL |Description | +===========+====================+=========================+=============+ |Client |https://wiki.example|https://acme.wiki.example|Wiki app that| | | | |embeds | | | | |content from | | | | |one or more | | | | |resource | | | | |applications | +-----------+--------------------+-------------------------+-------------+ |Resource |https://chat.example|https://acme.chat.example|Chat and | |Application| | |communication| | | | |app | +-----------+--------------------+-------------------------+-------------+ |Identity |https://idp.example |https://acme.idp.example |Identity | |Provider | | |Provider | +-----------+--------------------+-------------------------+-------------+ Table 1 Sequence Diagram Parecki & McGuinness Expires 23 April 2025 [Page 4] Internet-Draft ID Token Authz Grant October 2024 +---------+ +--------------+ +---------------+ +--------------+ | | | | | Resource | | Resource | | | | IdP | | Application | | Application | | Client | | Authorization| | Authorization | | Resource | | | | Server | | Server | | Server | +----+----+ +-------+------+ +-------+-------+ +------+-------+ | | | | | | | | | --------------> | | | | 1 User SSO | | | | | | | | ID Token | | | | <- - - - - - - - | | | | | | | | | | | | | | | | 2 Token Exchange | | | | ----------------> | | | | | | | | ID-JAG | | | | <- - - - - - - - | | | | | | | | | | | | | | | | 3 Present ID-JAG | | | | ------------------+----------------> | | | | | | | Access Token | | | | <- - - - - - - - - - - - - - - - - - | | | | | | | | | | | | | | | 4 Resource Request with Access Token| | | -----------------------------------------------------> | | | | | | | | | | | | | 1. User logs in to the Client, the Client obtains the Identity Assertion (e.g. OpenID Connect ID Token or SAML assertion) 2. Client uses the Identity Assertion to request an Identity Assertion Authorization Grant for the Resource Application from the IdP 3. Client exchanges the Identity Assertion Authorization Grant JWT for an Access Token at the Resource Application's token endpoint Parecki & McGuinness Expires 23 April 2025 [Page 5] Internet-Draft ID Token Authz Grant October 2024 4. Client makes an API request with the Access Token This specification is constrained to deployments where all Resource Application Resource Servers are leveraging the same IdP Authorization Server for Single-Sign-On (SSO) and session management services. The IdP provides a consistent trust boundary enabling the set of Resource Application Authorization Servers to honor the JWT Authorization Grant (ID-JAG) issued by the IdP. This specification also assumes that the Resource Server Authorization Servers delegate user authorization authority to the IdP (e.g. the IdP is trusted to ensure the scopes identified in the ID-JAG have been correctly authorized before issuing the ID-JAG token). 4. User Authentication The Client initiates an authentication request with the IdP using OpenID Connect or SAML. The following is an example using OpenID Connect 302 Redirect Location: https://acme.idp.example/authorize?response_type=code&scope=openid&client_id=... The user authenticates with the IdP, and is redirected back to the Client with an authorization code, which it can then exchange for an ID Token. Note: The Enterprise IdP may enforce security controls such as multi- factor authentication before granting the user access to the Client. POST /token HTTP/1.1 Host: acme.idp.example Content-Type: application/x-www-form-urlencoded grant_type=authorization_code &code=..... HTTP/1.1 200 Ok Content-Type: application/json { "id_token": "eyJraWQiOiJzMTZ0cVNtODhwREo4VGZCXzdrSEtQ...", "token_type": "Bearer", "access_token": "7SliwCQP1brGdjBtsaMnXo", "scope": "openid" } Parecki & McGuinness Expires 23 April 2025 [Page 6] Internet-Draft ID Token Authz Grant October 2024 5. Token Exchange The Client makes a Token Exchange [RFC8693] request to the IdP's Token Endpoint with the following parameters: requested_token_type: REQUIRED - The value urn:ietf:params:oauth:token-type:id-jag indicates that an ID Assertion JWT is being requested. resource: REQUIRED - The Issuer URL of the Resource Application's authorization server. audience: The audience parameter MUST NOT be used. scope: OPTIONAL - The space-separated list of scopes at the Resource Application that is being requested. subject_token: REQUIRED - The identity assertion (e.g. the OpenID Connect ID Token or SAML assertion) for the target end-user. subject_token_type: REQUIRED - An identifier, as described in Section 3 of [RFC8693], that indicates the type of the security token in the subject_token parameter. For an OpenID Connect ID Token: urn:ietf:params:oauth:token-type:id_token, or for a SAML assertion: urn:ietf:params:oauth:token-type:saml2. The additional parameters defined in Section 2.1 of [RFC8693] actor_token and actor_token_type are not used in this specification. Client authentication to the authorization server is done using the standard mechanisms provided by OAuth 2.0. Section 2.3.1 of [RFC6749] defines password-based authentication of the client (client_id and client_secret), however, client authentication is extensible and other mechanisms are possible. For example, [RFC7523] defines client authentication using bearer JSON Web Tokens using client_assertion and client_assertion_type. The example below uses an ID Token as the Identity Assertion, and uses a JWT Bearer Assertion ([RFC7523]) as the client authentication method, (tokens truncated for brevity): Parecki & McGuinness Expires 23 April 2025 [Page 7] Internet-Draft ID Token Authz Grant October 2024 POST /oauth2/token HTTP/1.1 Host: acme.idp.example Content-Type: application/x-www-form-urlencoded grant_type=urn:ietf:params:oauth:grant-type:token-exchange &requested_token_type=urn:ietf:params:oauth:token-type:id-jag &resource=https://acme.chat.example/ &scope=chat.read+chat.history &subject_token=eyJraWQiOiJzMTZ0cVNtODhwREo4VGZCXzdrSEtQ... &subject_token_type=urn:ietf:params:oauth:token-type:id_token &client_assertion_type=urn:ietf:params:oauth:client-assertion-type:jwt-bearer &client_assertion=eyJhbGciOiJSUzI1NiIsImtpZCI6IjIyIn0... 5.1. Processing Rules The IdP MUST validate the subject token, and MUST validate that the audience of the Subject Token (e.g. the aud claim of the ID Token) matches the client_id of the client authentication of the request. The IdP evaluates administrator-defined policy for the token exchange request and determines if the client should be granted access to act on behalf of the subject for the target audience and scopes. The IdP may also introspect the authentication context described in the SSO assertion to determine if step-up authentication is required. 5.2. Response If access is granted, the IdP creates a signed Identity Assertion Authorization Grant JWT and returns it in the token exchange response defined in Section 2.2 of [RFC8693]: HTTP/1.1 200 OK Content-Type: application/json Cache-Control: no-store Pragma: no-cache { "issued_token_type": "urn:ietf:params:oauth:token-type:id-jag", "access_token": "eyJhbGciOiJIUzI1NiIsI...", "token_type": "N_A", "scope": "chat.read chat.history", "expires_in": 300 } issued_token_type: REQUIRED - urn:ietf:params:oauth:token-type:id- jag Parecki & McGuinness Expires 23 April 2025 [Page 8] Internet-Draft ID Token Authz Grant October 2024 access_token: REQUIRED - The Identity Assertion Authorization Grant JWT. (Note: Token Exchange requires the access_token response parameter for historical reasons, even though this is not an OAuth access token.) token_type: REQUIRED - N_A (because this is not an OAuth access token.) scope: OPTIONAL if the scope of the issued token is identical to the scope requested by the client; otherwise, it is REQUIRED. This may be fewer scopes than the application requested based on various policies in the IdP. expires_in: RECOMMENDED - The lifetime in seconds of the authorization grant. refresh_token: OPTIONAL according to Section 2.2 of [RFC8693]. In the context of this specification, this parameter SHOULD NOT be used. 5.2.1. Error Response On an error condition, the IdP returns an OAuth 2.0 Token Error response as defined in Section 5.2 of [RFC6749], e.g: HTTP/1.1 400 Bad Request Content-Type: application/json Cache-Control: no-store { "error": "invalid_grant", "error_description": "Audience validation failed" } 5.3. Identity Assertion Authorization Grant JWT The Identity Assertion Authorization Grant JWT is issued and signed by the IdP, and describes the intended audience of the authorization grant as well as the client to which it was issued and the subject identifier of the resource owner, using the following claims: iss: REQUIRED - The IdP issuer URL as defined in Section 4.1.1 of [RFC7519] sub: REQUIRED - The subject identifier (e.g. user ID) of the resource owner at the Resource Application as defined in Section 4.1.2 of [RFC7519] Parecki & McGuinness Expires 23 April 2025 [Page 9] Internet-Draft ID Token Authz Grant October 2024 aud: REQUIRED - The Issuer URL of the Resource Application's authorization server as defined in Section 4.1.3 of [RFC7519] client_id: REQUIRED - An identifier of the client that this JWT was issued to, which MUST be recognized by the Resource Application's authorization server. For interoperability, the client identifier SHOULD be a client_id as defined in Section 4.3 [RFC8693]. jti: REQUIRED - Unique ID of this JWT as defined in Section 4.1.7 of [RFC7519] exp: REQUIRED - as defined in Section 4.1.4 of [RFC7519] iat: REQUIRED - as defined in Section 4.1.6 of [RFC7519] scope: OPTIONAL - a JSON string containing a space-separated list of scopes associated with the token, in the format described in Section 3.3 of [RFC6749] The typ of the JWT indicated in the JWT header MUST be oauth-id- jag+jwt. An example JWT shown with expanded header and payload claims is below: { "typ": "oauth-id-jag+jwt" } . { "jti": "9e43f81b64a33f20116179", "iss": "https://acme.idp.example", "sub": "U019488227", "aud": "https://acme.chat.example/", "client_id": "f53f191f9311af35", "exp": 1311281970, "iat": 1311280970, "scope": "chat.read chat.history" } . signature The authorization server MAY add additional claims as necessary. Implementation notes: Parecki & McGuinness Expires 23 April 2025 [Page 10] Internet-Draft ID Token Authz Grant October 2024 * If the IdP is multi-tenant and uses the same issuer for all tenants, the Resource Application will already have IdP-specific logic to determine the tenant from the OpenID Connect ID Token (e.g. the hd claim in Google) or SAML assertion, and will need to use that if the IdP also has only one client registration for the Resource Application. * sub should be an opaque ID, as iss+sub is unique. The IdP might want to also include the user's email here, which it should do as a new email claim. This would let the app dedupe existing users who may have an account with an email address but have not done SSO yet. 6. Access Token Request The Client makes an access token request to the Resource Application's token endpoint using the previously obtained Identity Assertion Authorization Grant as a JWT Assertion as defined by [RFC7523]. grant_type: REQUIRED - The value of grant_type is urn:ietf:params:oauth:grant-type:jwt-bearer assertion: REQUIRED - The Identity Assertion Authorization Grant JWT obtained in the previous token exchange step The Client authenticates with its credentials as registered with the Resource Application's authorization server. For example: POST /oauth2/token HTTP/1.1 Host: acme.chat.example Authorization: Basic yZS1yYW5kb20tc2VjcmV0v3JOkF0XG5Qx2 grant_type=urn:ietf:params:oauth:grant-type:jwt-bearer assertion=eyJhbGciOiJIUzI1NiIsI... 6.1. Processing Rules All of Section 5.2 of [RFC7521] applies, in addition to the following processing rules: * Validate the JWT typ is oauth-id-jag+jwt (per [RFC8725]) * The aud claim MUST identify the Issuer URL of the Resource Application's authorization server as the intended audience of the JWT. Parecki & McGuinness Expires 23 April 2025 [Page 11] Internet-Draft ID Token Authz Grant October 2024 * The client_id claim MUST identify the same client as the client authentication in the request. 6.2. Response The Resource Application token endpoint responds with an OAuth 2.0 Token Response, e.g.: HTTP/1.1 200 OK Content-Type: application/json;charset=UTF-8 Cache-Control: no-store Pragma: no-cache { "token_type": "Bearer", "access_token": "2YotnFZFEjr1zCsicMWpAA", "expires_in": 86400, "scope": "chat.read chat.history", "refresh_token": "tGzv3JOkF0XG5Qx2TlKWIA", } 7. Security Considerations 7.1. Client Authentication This specification SHOULD only be supported for confidential clients. Public clients SHOULD redirect the user with an OAuth 2.0 Authorization Request. 7.2. Step-Up Authentication In the initial token exchange request, the IdP may require step-up authentication for the subject if the authentication context in the subject's assertion does not meet policy requirements. An insufficient_user_authentication OAuth error response may be returned to convey the authentication requirements back to the client similar to OAuth 2.0 Step-up Authentication Challenge Protocol [RFC9470]. HTTP/1.1 400 Bad Request Content-Type: application/json Cache-Control: no-store { "error": "insufficient_user_authentication", "error_description": "Subject doesn't meet authentication requirements", "max_age": 5 } Parecki & McGuinness Expires 23 April 2025 [Page 12] Internet-Draft ID Token Authz Grant October 2024 The Client would need to redirect the user back to the IdP to obtain a new assertion that meets the requirements and retry the token exchange. TBD: It may make more sense to request the Identity Assertion Authorization Grant as an additional response_type on the authorization request if using OIDC for SSO when performing a step-up to skip the need for additional token exchange round-trip. 7.3. Cross-Domain Use This specification is intended for cross-domain uses where the Client, Resource App, and Identity Provider are all in different trust domains. In particular, the Identity Provider SHOULD NOT issue access tokens in response to an ID-JAG it issued itself. Doing so could lead to unintentional broadening of the scope of authorization. 8. IANA Considerations 8.1. Media Types This section registers oauth-id-jag+jwt, a new media type [RFC2046] in the "Media Types" registry [IANA.MediaTypes] in the manner described in [RFC6838]. It can be used to indicate that the content is a Identity Assertion Authorization Grant JWT. 8.2. OAuth URI Registration This section registers urn:ietf:params:oauth:token-type:id-jag in the "OAuth URI" subregistry of the "OAuth Parameters" registry [IANA.oauth-parameters]. * URN: urn:ietf:params:oauth:token-type:id-jag * Common Name: Token type URI for a Identity Assertion JWT Authorization Grant * Change Controller: IESG * Specification Document: This document 9. References 9.1. Normative References [I-D.ietf-oauth-identity-chaining] Schwenkschuster, A., Kasselman, P., Burgin, K., Jenkins, M. J., and B. Campbell, "OAuth Identity and Authorization Parecki & McGuinness Expires 23 April 2025 [Page 13] Internet-Draft ID Token Authz Grant October 2024 Chaining Across Domains", Work in Progress, Internet- Draft, draft-ietf-oauth-identity-chaining-02, 8 July 2024, . [IANA.MediaTypes] "*** BROKEN REFERENCE ***". [IANA.oauth-parameters] IANA, "OAuth Parameters", . [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, DOI 10.17487/RFC2046, November 1996, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type Specifications and Registration Procedures", BCP 13, RFC 6838, DOI 10.17487/RFC6838, January 2013, . [RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, . [RFC7521] Campbell, B., Mortimore, C., Jones, M., and Y. Goland, "Assertion Framework for OAuth 2.0 Client Authentication and Authorization Grants", RFC 7521, DOI 10.17487/RFC7521, May 2015, . [RFC7523] Jones, M., Campbell, B., and C. Mortimore, "JSON Web Token (JWT) Profile for OAuth 2.0 Client Authentication and Authorization Grants", RFC 7523, DOI 10.17487/RFC7523, May 2015, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . Parecki & McGuinness Expires 23 April 2025 [Page 14] Internet-Draft ID Token Authz Grant October 2024 [RFC8693] Jones, M., Nadalin, A., Campbell, B., Ed., Bradley, J., and C. Mortimore, "OAuth 2.0 Token Exchange", RFC 8693, DOI 10.17487/RFC8693, January 2020, . [RFC8725] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best Current Practices", BCP 225, RFC 8725, DOI 10.17487/RFC8725, February 2020, . 9.2. Informative References [RFC9470] Bertocci, V. and B. Campbell, "OAuth 2.0 Step Up Authentication Challenge Protocol", RFC 9470, DOI 10.17487/RFC9470, September 2023, . Appendix A. Use Cases A.1. Enterprise Deployment Enterprises often have hundreds of SaaS applications. SaaS applications often have integrations to other SaaS applications that are critical to the application experience and jobs to be done. When a SaaS app needs to request an access token on behalf of a user to a 3rd party SaaS integration's API, the end-user typically needs to complete an interactive delegated OAuth 2.0 flow, as the SaaS application is not in the same security or policy domain as the 3rd party SaaS integration. It is industry best practice for an enterprise to connect their ecosystem of SaaS applications to their Identity Provider (IdP) to centralize identity and access management capabilites for the organization. End-users get a better experience (SSO) and administrators get better security outcomes such multi-factor authentication and zero-trust. SaaS applications today enable the administrator to establish trust with an IdP for user authentication. This specification can be used to extend the SSO relationship of multiple SaaS applications to include API access between these applications as well. This specification enables federation for Authorization Servers across policy or administrative boundaries. The same enterprise IdP that is trusted by applications for SSO can be extended to broker access to APIs. This enables the enterprise to centralize more access decisions across their SaaS ecosystem and provides better end-user experience for users that need to connect multiple applications via OAuth 2.0. Parecki & McGuinness Expires 23 April 2025 [Page 15] Internet-Draft ID Token Authz Grant October 2024 A.1.1. Preconditions * The Client has a registered OAuth 2.0 Client with the IdP Authorization Server * The Client has a registered OAuth 2.0 Client with the Resource Application * Enterprise has established a trust relationship between their IdP and the Client for SSO and Identity Assertion Authorization Grant * Enterprise has established a trust relationship between their IdP and the Resource Application for SSO and Identity Assertion Authorization Grant * Enterprise has granted the Client permission to act on behalf of users for the Resource Application with a set of scopes A.2. Email and Calendaring Applications Email clients can be used with arbitrary email servers, and cannot require pre-established relationships between each email client and each email server. When an email client uses OAuth to obtain an access token to an email server, this provides the security benefit of being able to use strong multi-factor authentication methods provided by the email server's authorization server, but does require that the user go through a web-based flow to log in to the email client. However, this web-based flow is often seen as distruptive to the user experience when initiated from a desktop or mobile native application, and so is often attempted to be minimized as much as possible. When the email client needs access to a separate API, such as a third-party calendaring application, traditionally this would require that the email client go through another web-based OAuth redirect flow to obtain authorization and ultimately an access token. To streamline the user experience, this specification can be used to enable the email client to use the identity assertion to obtain an access token for the third-party calendaring application without any user interaction. A.2.1. Preconditions * The Client does not have a pre-registered OAuth 2.0 client at the IdP Authorization Server or the Resource Application Parecki & McGuinness Expires 23 April 2025 [Page 16] Internet-Draft ID Token Authz Grant October 2024 * The Client has obtained an Identity Assertion (e.g. ID Token) from the IdP Authorization Server * The Resource Application is configured to allow the Identity Assertion Authorization Grant from unregistered clients Acknowledgments The authors would like to thank the following people for their contributions and reviews of this specification: Brian Campbell, Kamron Batmanghelich, Sofia Desenberg. Document History [[ To be removed from the final specification ]] -02 * Changed the aud property to the Issuer URL instead of the token endpoint -01 * Corrected the scope property in the JWT to match token exchange and JWT access token profile * Formatting and editorial fixes -00 * Initial revision Authors' Addresses Aaron Parecki Okta Email: aaron@parecki.com Karl McGuinness Independent Email: public@karlmcguinness.com Parecki & McGuinness Expires 23 April 2025 [Page 17]