patch-2.4.22 linux-2.4.22/include/asm-mips64/sibyte/sb1250_uart.h

Next file: linux-2.4.22/include/asm-mips64/sibyte/sentosa.h
Previous file: linux-2.4.22/include/asm-mips64/sibyte/sb1250_syncser.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/include/asm-mips64/sibyte/sb1250_uart.h linux-2.4.22/include/asm-mips64/sibyte/sb1250_uart.h
@@ -1,23 +1,23 @@
 /*  *********************************************************************
     *  SB1250 Board Support Package
-    *
+    *  
     *  UART Constants				File: sb1250_uart.h
-    *
-    *  This module contains constants and macros useful for
+    *  
+    *  This module contains constants and macros useful for 
     *  manipulating the SB1250's UARTs
     *
     *  SB1250 specification level:  User's manual 1/02/02
+    *  
+    *  Author:  Mitch Lichtenberg
+    *  
+    *********************************************************************  
     *
-    *  Author:  Mitch Lichtenberg (mpl@broadcom.com)
-    *
-    *********************************************************************
-    *
-    *  Copyright 2000,2001
+    *  Copyright 2000,2001,2002,2003
     *  Broadcom Corporation. All rights reserved.
-    *
-    *  This program is free software; you can redistribute it and/or
-    *  modify it under the terms of the GNU General Public License as
-    *  published by the Free Software Foundation; either version 2 of
+    *  
+    *  This program is free software; you can redistribute it and/or 
+    *  modify it under the terms of the GNU General Public License as 
+    *  published by the Free Software Foundation; either version 2 of 
     *  the License, or (at your option) any later version.
     *
     *  This program is distributed in the hope that it will be useful,
@@ -27,7 +27,7 @@
     *
     *  You should have received a copy of the GNU General Public License
     *  along with this program; if not, write to the Free Software
-    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+    *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, 
     *  MA 02111-1307 USA
     ********************************************************************* */
 
@@ -37,7 +37,7 @@
 
 #include "sb1250_defs.h"
 
-/* **********************************************************************
+/* ********************************************************************** 
    * DUART Registers
    ********************************************************************** */
 
@@ -97,6 +97,7 @@
 
 #define M_DUART_TX_CTS_ENA          _SB_MAKEMASK1(4)
 
+
 #define M_DUART_MODE_RESERVED2      _SB_MAKEMASK1(5)    /* must be zero */
 
 #define S_DUART_CHAN_MODE	    6
@@ -144,7 +145,7 @@
 #define V_DUART_MISC_CMD_START_BREAK     V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK)
 #define V_DUART_MISC_CMD_STOP_BREAK      V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK)
 
-#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7)
+#define M_DUART_CMD_RESERVED             _SB_MAKEMASK1(7) 
 
 /*
  * DUART Status Register (Table 10-6)
@@ -164,7 +165,7 @@
 
 /*
  * DUART Baud Rate Register (Table 10-7)
- * Register: DUART_CLK_SEL_A
+ * Register: DUART_CLK_SEL_A 
  * Register: DUART_CLK_SEL_B
  */
 
@@ -207,6 +208,7 @@
 #define S_DUART_IN_PIN_CHNG         4
 #define M_DUART_IN_PIN_CHNG         _SB_MAKEMASK(4,S_DUART_IN_PIN_CHNG)
 
+
 /*
  * DUART Output port control register (Table 10-14)
  * Register: DUART_OPCR
@@ -329,8 +331,9 @@
 #define M_DUART_OUT_PIN_CLR(chan) \
     (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1)
 
-/*
- * Full Interrupt Control Register (PASS2)
+#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1)
+/* 
+ * Full Interrupt Control Register
  */
 
 #define S_DUART_SIG_FULL           _SB_MAKE64(0)
@@ -342,6 +345,7 @@
 #define M_DUART_INT_TIME           _SB_MAKEMASK(4,S_DUART_INT_TIME)
 #define V_DUART_INT_TIME(x)        _SB_MAKEVALUE(x,S_DUART_INT_TIME)
 #define G_DUART_INT_TIME(x)        _SB_GETVALUE(x,S_DUART_INT_TIME,M_DUART_INT_TIME)
+#endif /* 1250 PASS2 || 112x PASS1 */
 
 
 /* ********************************************************************** */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)