patch-2.4.22 linux-2.4.22/drivers/scsi/aic7xxx/aiclib.c

Next file: linux-2.4.22/drivers/scsi/aic7xxx/aiclib.h
Previous file: linux-2.4.22/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/drivers/scsi/aic7xxx/aiclib.c linux-2.4.22/drivers/scsi/aic7xxx/aiclib.c
@@ -0,0 +1,1413 @@
+/*
+ * Implementation of Utility functions for all SCSI device types.
+ *
+ * Copyright (c) 1997, 1998, 1999 Justin T. Gibbs.
+ * Copyright (c) 1997, 1998 Kenneth D. Merry.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/cam/scsi/scsi_all.c,v 1.38 2002/09/23 04:56:35 mjacob Exp $
+ * $Id$
+ */
+
+#include <linux/blk.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/version.h>
+
+/* Core SCSI definitions */
+#include "scsi.h"
+#include "hosts.h"
+#include "aiclib.h"
+#include "cam.h"
+
+#ifndef FALSE
+#define FALSE   0
+#endif /* FALSE */
+#ifndef TRUE
+#define TRUE    1
+#endif /* TRUE */
+#ifndef ERESTART
+#define ERESTART        -1              /* restart syscall */
+#endif
+#ifndef EJUSTRETURN
+#define EJUSTRETURN     -2              /* don't modify regs, just return */
+#endif
+
+static int	ascentrycomp(const void *key, const void *member);
+static int	senseentrycomp(const void *key, const void *member);
+static void	fetchtableentries(int sense_key, int asc, int ascq,
+				  struct scsi_inquiry_data *,
+				  const struct sense_key_table_entry **,
+				  const struct asc_table_entry **);
+static void *	scsibsearch(const void *key, const void *base, size_t nmemb,
+			    size_t size,
+			    int (*compar)(const void *, const void *));
+typedef int (cam_quirkmatch_t)(caddr_t, caddr_t);
+static int	cam_strmatch(const u_int8_t *str, const u_int8_t *pattern,
+			     int str_len);
+static caddr_t	cam_quirkmatch(caddr_t target, caddr_t quirk_table,
+			       int num_entries, int entry_size,
+			       cam_quirkmatch_t *comp_func);
+
+#define SCSI_NO_SENSE_STRINGS 1
+#if !defined(SCSI_NO_SENSE_STRINGS)
+#define SST(asc, ascq, action, desc) \
+	asc, ascq, action, desc
+#else 
+static const char empty_string[] = "";
+
+#define SST(asc, ascq, action, desc) \
+	asc, ascq, action, empty_string
+#endif 
+
+static const struct sense_key_table_entry sense_key_table[] = 
+{
+	{ SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" },
+	{ SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" },
+	{
+	  SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
+	  "NOT READY"
+	},
+	{ SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" },
+	{ SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" },
+	{ SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" },
+	{ SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" },
+	{ SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" },
+	{ SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" },
+	{ SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" },
+	{ SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" },
+	{ SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" },
+	{ SSD_KEY_EQUAL, SS_NOP, "EQUAL" },
+	{ SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" },
+	{ SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" },
+	{ SSD_KEY_RESERVED, SS_FATAL|EIO, "RESERVED" }
+};
+
+static const int sense_key_table_size =
+    sizeof(sense_key_table)/sizeof(sense_key_table[0]);
+
+static struct asc_table_entry quantum_fireball_entries[] = {
+	{SST(0x04, 0x0b, SS_START|SSQ_DECREMENT_COUNT|ENXIO, 
+	     "Logical unit not ready, initializing cmd. required")}
+};
+
+static struct asc_table_entry sony_mo_entries[] = {
+	{SST(0x04, 0x00, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
+	     "Logical unit not ready, cause not reportable")}
+};
+
+static struct scsi_sense_quirk_entry sense_quirk_table[] = {
+	{
+		/*
+		 * The Quantum Fireball ST and SE like to return 0x04 0x0b when
+		 * they really should return 0x04 0x02.  0x04,0x0b isn't
+		 * defined in any SCSI spec, and it isn't mentioned in the
+		 * hardware manual for these drives.
+		 */
+		{T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"},
+		/*num_sense_keys*/0,
+		sizeof(quantum_fireball_entries)/sizeof(struct asc_table_entry),
+		/*sense key entries*/NULL,
+		quantum_fireball_entries
+	},
+	{
+		/*
+		 * This Sony MO drive likes to return 0x04, 0x00 when it
+		 * isn't spun up.
+		 */
+		{T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"},
+		/*num_sense_keys*/0,
+		sizeof(sony_mo_entries)/sizeof(struct asc_table_entry),
+		/*sense key entries*/NULL,
+		sony_mo_entries
+	}
+};
+
+static const int sense_quirk_table_size =
+    sizeof(sense_quirk_table)/sizeof(sense_quirk_table[0]);
+
+static struct asc_table_entry asc_table[] = {
+/*
+ * From File: ASC-NUM.TXT
+ * SCSI ASC/ASCQ Assignments
+ * Numeric Sorted Listing
+ * as of  5/12/97
+ *
+ * D - DIRECT ACCESS DEVICE (SBC)                     device column key
+ * .T - SEQUENTIAL ACCESS DEVICE (SSC)               -------------------
+ * . L - PRINTER DEVICE (SSC)                           blank = reserved
+ * .  P - PROCESSOR DEVICE (SPC)                     not blank = allowed
+ * .  .W - WRITE ONCE READ MULTIPLE DEVICE (SBC)
+ * .  . R - CD DEVICE (MMC)
+ * .  .  S - SCANNER DEVICE (SGC)
+ * .  .  .O - OPTICAL MEMORY DEVICE (SBC)
+ * .  .  . M - MEDIA CHANGER DEVICE (SMC)
+ * .  .  .  C - COMMUNICATION DEVICE (SSC)
+ * .  .  .  .A - STORAGE ARRAY DEVICE (SCC)
+ * .  .  .  . E - ENCLOSURE SERVICES DEVICE (SES)
+ * DTLPWRSOMCAE        ASC   ASCQ  Action  Description
+ * ------------        ----  ----  ------  -----------------------------------*/
+/* DTLPWRSOMCAE */{SST(0x00, 0x00, SS_NOP,
+			"No additional sense information") },
+/*  T    S      */{SST(0x00, 0x01, SS_RDEF,
+			"Filemark detected") },
+/*  T    S      */{SST(0x00, 0x02, SS_RDEF,
+			"End-of-partition/medium detected") },
+/*  T           */{SST(0x00, 0x03, SS_RDEF,
+			"Setmark detected") },
+/*  T    S      */{SST(0x00, 0x04, SS_RDEF,
+			"Beginning-of-partition/medium detected") },
+/*  T    S      */{SST(0x00, 0x05, SS_RDEF,
+			"End-of-data detected") },
+/* DTLPWRSOMCAE */{SST(0x00, 0x06, SS_RDEF,
+			"I/O process terminated") },
+/*      R       */{SST(0x00, 0x11, SS_FATAL|EBUSY,
+			"Audio play operation in progress") },
+/*      R       */{SST(0x00, 0x12, SS_NOP,
+			"Audio play operation paused") },
+/*      R       */{SST(0x00, 0x13, SS_NOP,
+			"Audio play operation successfully completed") },
+/*      R       */{SST(0x00, 0x14, SS_RDEF,
+			"Audio play operation stopped due to error") },
+/*      R       */{SST(0x00, 0x15, SS_NOP,
+			"No current audio status to return") },
+/* DTLPWRSOMCAE */{SST(0x00, 0x16, SS_FATAL|EBUSY,
+			"Operation in progress") },
+/* DTL WRSOM AE */{SST(0x00, 0x17, SS_RDEF,
+			"Cleaning requested") },
+/* D   W  O     */{SST(0x01, 0x00, SS_RDEF,
+			"No index/sector signal") },
+/* D   WR OM    */{SST(0x02, 0x00, SS_RDEF,
+			"No seek complete") },
+/* DTL W SO     */{SST(0x03, 0x00, SS_RDEF,
+			"Peripheral device write fault") },
+/*  T           */{SST(0x03, 0x01, SS_RDEF,
+			"No write current") },
+/*  T           */{SST(0x03, 0x02, SS_RDEF,
+			"Excessive write errors") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x00,
+			SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EIO,
+			"Logical unit not ready, cause not reportable") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x01,
+			SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
+			"Logical unit is in process of becoming ready") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x02, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
+			"Logical unit not ready, initializing cmd. required") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x03, SS_FATAL|ENXIO,
+			"Logical unit not ready, manual intervention required")},
+/* DTL    O     */{SST(0x04, 0x04, SS_FATAL|EBUSY,
+			"Logical unit not ready, format in progress") },
+/* DT  W  OMCA  */{SST(0x04, 0x05, SS_FATAL|EBUSY,
+			"Logical unit not ready, rebuild in progress") },
+/* DT  W  OMCA  */{SST(0x04, 0x06, SS_FATAL|EBUSY,
+			"Logical unit not ready, recalculation in progress") },
+/* DTLPWRSOMCAE */{SST(0x04, 0x07, SS_FATAL|EBUSY,
+			"Logical unit not ready, operation in progress") },
+/*      R       */{SST(0x04, 0x08, SS_FATAL|EBUSY,
+			"Logical unit not ready, long write in progress") },
+/* DTL WRSOMCAE */{SST(0x05, 0x00, SS_RDEF,
+			"Logical unit does not respond to selection") },
+/* D   WR OM    */{SST(0x06, 0x00, SS_RDEF,
+			"No reference position found") },
+/* DTL WRSOM    */{SST(0x07, 0x00, SS_RDEF,
+			"Multiple peripheral devices selected") },
+/* DTL WRSOMCAE */{SST(0x08, 0x00, SS_RDEF,
+			"Logical unit communication failure") },
+/* DTL WRSOMCAE */{SST(0x08, 0x01, SS_RDEF,
+			"Logical unit communication time-out") },
+/* DTL WRSOMCAE */{SST(0x08, 0x02, SS_RDEF,
+			"Logical unit communication parity error") },
+/* DT   R OM    */{SST(0x08, 0x03, SS_RDEF,
+			"Logical unit communication crc error (ultra-dma/32)")},
+/* DT  WR O     */{SST(0x09, 0x00, SS_RDEF,
+			"Track following error") },
+/*     WR O     */{SST(0x09, 0x01, SS_RDEF,
+			"Tracking servo failure") },
+/*     WR O     */{SST(0x09, 0x02, SS_RDEF,
+			"Focus servo failure") },
+/*     WR O     */{SST(0x09, 0x03, SS_RDEF,
+			"Spindle servo failure") },
+/* DT  WR O     */{SST(0x09, 0x04, SS_RDEF,
+			"Head select fault") },
+/* DTLPWRSOMCAE */{SST(0x0A, 0x00, SS_FATAL|ENOSPC,
+			"Error log overflow") },
+/* DTLPWRSOMCAE */{SST(0x0B, 0x00, SS_RDEF,
+			"Warning") },
+/* DTLPWRSOMCAE */{SST(0x0B, 0x01, SS_RDEF,
+			"Specified temperature exceeded") },
+/* DTLPWRSOMCAE */{SST(0x0B, 0x02, SS_RDEF,
+			"Enclosure degraded") },
+/*  T   RS      */{SST(0x0C, 0x00, SS_RDEF,
+			"Write error") },
+/* D   W  O     */{SST(0x0C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Write error - recovered with auto reallocation") },
+/* D   W  O     */{SST(0x0C, 0x02, SS_RDEF,
+			"Write error - auto reallocation failed") },
+/* D   W  O     */{SST(0x0C, 0x03, SS_RDEF,
+			"Write error - recommend reassignment") },
+/* DT  W  O     */{SST(0x0C, 0x04, SS_RDEF,
+			"Compression check miscompare error") },
+/* DT  W  O     */{SST(0x0C, 0x05, SS_RDEF,
+			"Data expansion occurred during compression") },
+/* DT  W  O     */{SST(0x0C, 0x06, SS_RDEF,
+			"Block not compressible") },
+/*      R       */{SST(0x0C, 0x07, SS_RDEF,
+			"Write error - recovery needed") },
+/*      R       */{SST(0x0C, 0x08, SS_RDEF,
+			"Write error - recovery failed") },
+/*      R       */{SST(0x0C, 0x09, SS_RDEF,
+			"Write error - loss of streaming") },
+/*      R       */{SST(0x0C, 0x0A, SS_RDEF,
+			"Write error - padding blocks added") },
+/* D   W  O     */{SST(0x10, 0x00, SS_RDEF,
+			"ID CRC or ECC error") },
+/* DT  WRSO     */{SST(0x11, 0x00, SS_RDEF,
+			"Unrecovered read error") },
+/* DT  W SO     */{SST(0x11, 0x01, SS_RDEF,
+			"Read retries exhausted") },
+/* DT  W SO     */{SST(0x11, 0x02, SS_RDEF,
+			"Error too long to correct") },
+/* DT  W SO     */{SST(0x11, 0x03, SS_RDEF,
+			"Multiple read errors") },
+/* D   W  O     */{SST(0x11, 0x04, SS_RDEF,
+			"Unrecovered read error - auto reallocate failed") },
+/*     WR O     */{SST(0x11, 0x05, SS_RDEF,
+			"L-EC uncorrectable error") },
+/*     WR O     */{SST(0x11, 0x06, SS_RDEF,
+			"CIRC unrecovered error") },
+/*     W  O     */{SST(0x11, 0x07, SS_RDEF,
+			"Data re-synchronization error") },
+/*  T           */{SST(0x11, 0x08, SS_RDEF,
+			"Incomplete block read") },
+/*  T           */{SST(0x11, 0x09, SS_RDEF,
+			"No gap found") },
+/* DT     O     */{SST(0x11, 0x0A, SS_RDEF,
+			"Miscorrected error") },
+/* D   W  O     */{SST(0x11, 0x0B, SS_RDEF,
+			"Unrecovered read error - recommend reassignment") },
+/* D   W  O     */{SST(0x11, 0x0C, SS_RDEF,
+			"Unrecovered read error - recommend rewrite the data")},
+/* DT  WR O     */{SST(0x11, 0x0D, SS_RDEF,
+			"De-compression CRC error") },
+/* DT  WR O     */{SST(0x11, 0x0E, SS_RDEF,
+			"Cannot decompress using declared algorithm") },
+/*      R       */{SST(0x11, 0x0F, SS_RDEF,
+			"Error reading UPC/EAN number") },
+/*      R       */{SST(0x11, 0x10, SS_RDEF,
+			"Error reading ISRC number") },
+/*      R       */{SST(0x11, 0x11, SS_RDEF,
+			"Read error - loss of streaming") },
+/* D   W  O     */{SST(0x12, 0x00, SS_RDEF,
+			"Address mark not found for id field") },
+/* D   W  O     */{SST(0x13, 0x00, SS_RDEF,
+			"Address mark not found for data field") },
+/* DTL WRSO     */{SST(0x14, 0x00, SS_RDEF,
+			"Recorded entity not found") },
+/* DT  WR O     */{SST(0x14, 0x01, SS_RDEF,
+			"Record not found") },
+/*  T           */{SST(0x14, 0x02, SS_RDEF,
+			"Filemark or setmark not found") },
+/*  T           */{SST(0x14, 0x03, SS_RDEF,
+			"End-of-data not found") },
+/*  T           */{SST(0x14, 0x04, SS_RDEF,
+			"Block sequence error") },
+/* DT  W  O     */{SST(0x14, 0x05, SS_RDEF,
+			"Record not found - recommend reassignment") },
+/* DT  W  O     */{SST(0x14, 0x06, SS_RDEF,
+			"Record not found - data auto-reallocated") },
+/* DTL WRSOM    */{SST(0x15, 0x00, SS_RDEF,
+			"Random positioning error") },
+/* DTL WRSOM    */{SST(0x15, 0x01, SS_RDEF,
+			"Mechanical positioning error") },
+/* DT  WR O     */{SST(0x15, 0x02, SS_RDEF,
+			"Positioning error detected by read of medium") },
+/* D   W  O     */{SST(0x16, 0x00, SS_RDEF,
+			"Data synchronization mark error") },
+/* D   W  O     */{SST(0x16, 0x01, SS_RDEF,
+			"Data sync error - data rewritten") },
+/* D   W  O     */{SST(0x16, 0x02, SS_RDEF,
+			"Data sync error - recommend rewrite") },
+/* D   W  O     */{SST(0x16, 0x03, SS_NOP|SSQ_PRINT_SENSE,
+			"Data sync error - data auto-reallocated") },
+/* D   W  O     */{SST(0x16, 0x04, SS_RDEF,
+			"Data sync error - recommend reassignment") },
+/* DT  WRSO     */{SST(0x17, 0x00, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with no error correction applied") },
+/* DT  WRSO     */{SST(0x17, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with retries") },
+/* DT  WR O     */{SST(0x17, 0x02, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with positive head offset") },
+/* DT  WR O     */{SST(0x17, 0x03, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with negative head offset") },
+/*     WR O     */{SST(0x17, 0x04, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with retries and/or CIRC applied") },
+/* D   WR O     */{SST(0x17, 0x05, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data using previous sector id") },
+/* D   W  O     */{SST(0x17, 0x06, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - data auto-reallocated") },
+/* D   W  O     */{SST(0x17, 0x07, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - recommend reassignment")},
+/* D   W  O     */{SST(0x17, 0x08, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - recommend rewrite") },
+/* D   W  O     */{SST(0x17, 0x09, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data without ECC - data rewritten") },
+/* D   W  O     */{SST(0x18, 0x00, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with error correction applied") },
+/* D   WR O     */{SST(0x18, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with error corr. & retries applied") },
+/* D   WR O     */{SST(0x18, 0x02, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data - data auto-reallocated") },
+/*      R       */{SST(0x18, 0x03, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with CIRC") },
+/*      R       */{SST(0x18, 0x04, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with L-EC") },
+/* D   WR O     */{SST(0x18, 0x05, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data - recommend reassignment") },
+/* D   WR O     */{SST(0x18, 0x06, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data - recommend rewrite") },
+/* D   W  O     */{SST(0x18, 0x07, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered data with ECC - data rewritten") },
+/* D      O     */{SST(0x19, 0x00, SS_RDEF,
+			"Defect list error") },
+/* D      O     */{SST(0x19, 0x01, SS_RDEF,
+			"Defect list not available") },
+/* D      O     */{SST(0x19, 0x02, SS_RDEF,
+			"Defect list error in primary list") },
+/* D      O     */{SST(0x19, 0x03, SS_RDEF,
+			"Defect list error in grown list") },
+/* DTLPWRSOMCAE */{SST(0x1A, 0x00, SS_RDEF,
+			"Parameter list length error") },
+/* DTLPWRSOMCAE */{SST(0x1B, 0x00, SS_RDEF,
+			"Synchronous data transfer error") },
+/* D      O     */{SST(0x1C, 0x00, SS_RDEF,
+			"Defect list not found") },
+/* D      O     */{SST(0x1C, 0x01, SS_RDEF,
+			"Primary defect list not found") },
+/* D      O     */{SST(0x1C, 0x02, SS_RDEF,
+			"Grown defect list not found") },
+/* D   W  O     */{SST(0x1D, 0x00, SS_FATAL,
+			"Miscompare during verify operation" )},
+/* D   W  O     */{SST(0x1E, 0x00, SS_NOP|SSQ_PRINT_SENSE,
+			"Recovered id with ecc correction") },
+/* D      O     */{SST(0x1F, 0x00, SS_RDEF,
+			"Partial defect list transfer") },
+/* DTLPWRSOMCAE */{SST(0x20, 0x00, SS_FATAL|EINVAL,
+			"Invalid command operation code") },
+/* DT  WR OM    */{SST(0x21, 0x00, SS_FATAL|EINVAL,
+			"Logical block address out of range" )},
+/* DT  WR OM    */{SST(0x21, 0x01, SS_FATAL|EINVAL,
+			"Invalid element address") },
+/* D            */{SST(0x22, 0x00, SS_FATAL|EINVAL,
+			"Illegal function") }, /* Deprecated. Use 20 00, 24 00, or 26 00 instead */
+/* DTLPWRSOMCAE */{SST(0x24, 0x00, SS_FATAL|EINVAL,
+			"Invalid field in CDB") },
+/* DTLPWRSOMCAE */{SST(0x25, 0x00, SS_FATAL|ENXIO,
+			"Logical unit not supported") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x00, SS_FATAL|EINVAL,
+			"Invalid field in parameter list") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x01, SS_FATAL|EINVAL,
+			"Parameter not supported") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x02, SS_FATAL|EINVAL,
+			"Parameter value invalid") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x03, SS_FATAL|EINVAL,
+			"Threshold parameters not supported") },
+/* DTLPWRSOMCAE */{SST(0x26, 0x04, SS_FATAL|EINVAL,
+			"Invalid release of active persistent reservation") },
+/* DT  W  O     */{SST(0x27, 0x00, SS_FATAL|EACCES,
+			"Write protected") },
+/* DT  W  O     */{SST(0x27, 0x01, SS_FATAL|EACCES,
+			"Hardware write protected") },
+/* DT  W  O     */{SST(0x27, 0x02, SS_FATAL|EACCES,
+			"Logical unit software write protected") },
+/*  T           */{SST(0x27, 0x03, SS_FATAL|EACCES,
+			"Associated write protect") },
+/*  T           */{SST(0x27, 0x04, SS_FATAL|EACCES,
+			"Persistent write protect") },
+/*  T           */{SST(0x27, 0x05, SS_FATAL|EACCES,
+			"Permanent write protect") },
+/* DTLPWRSOMCAE */{SST(0x28, 0x00, SS_RDEF,
+			"Not ready to ready change, medium may have changed") },
+/* DTLPWRSOMCAE */{SST(0x28, 0x01, SS_FATAL|ENXIO,
+			"Import or export element accessed") },
+/*
+ * XXX JGibbs - All of these should use the same errno, but I don't think
+ * ENXIO is the correct choice.  Should we borrow from the networking
+ * errnos?  ECONNRESET anyone?
+ */
+/* DTLPWRSOMCAE */{SST(0x29, 0x00, SS_RDEF,
+			"Power on, reset, or bus device reset occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x01, SS_RDEF,
+			"Power on occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x02, SS_RDEF,
+			"Scsi bus reset occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x03, SS_RDEF,
+			"Bus device reset function occurred") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x04, SS_RDEF,
+			"Device internal reset") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x05, SS_RDEF,
+			"Transceiver mode changed to single-ended") },
+/* DTLPWRSOMCAE */{SST(0x29, 0x06, SS_RDEF,
+			"Transceiver mode changed to LVD") },
+/* DTL WRSOMCAE */{SST(0x2A, 0x00, SS_RDEF,
+			"Parameters changed") },
+/* DTL WRSOMCAE */{SST(0x2A, 0x01, SS_RDEF,
+			"Mode parameters changed") },
+/* DTL WRSOMCAE */{SST(0x2A, 0x02, SS_RDEF,
+			"Log parameters changed") },
+/* DTLPWRSOMCAE */{SST(0x2A, 0x03, SS_RDEF,
+			"Reservations preempted") },
+/* DTLPWRSO C   */{SST(0x2B, 0x00, SS_RDEF,
+			"Copy cannot execute since host cannot disconnect") },
+/* DTLPWRSOMCAE */{SST(0x2C, 0x00, SS_RDEF,
+			"Command sequence error") },
+/*       S      */{SST(0x2C, 0x01, SS_RDEF,
+			"Too many windows specified") },
+/*       S      */{SST(0x2C, 0x02, SS_RDEF,
+			"Invalid combination of windows specified") },
+/*      R       */{SST(0x2C, 0x03, SS_RDEF,
+			"Current program area is not empty") },
+/*      R       */{SST(0x2C, 0x04, SS_RDEF,
+			"Current program area is empty") },
+/*  T           */{SST(0x2D, 0x00, SS_RDEF,
+			"Overwrite error on update in place") },
+/* DTLPWRSOMCAE */{SST(0x2F, 0x00, SS_RDEF,
+			"Commands cleared by another initiator") },
+/* DT  WR OM    */{SST(0x30, 0x00, SS_RDEF,
+			"Incompatible medium installed") },
+/* DT  WR O     */{SST(0x30, 0x01, SS_RDEF,
+			"Cannot read medium - unknown format") },
+/* DT  WR O     */{SST(0x30, 0x02, SS_RDEF,
+			"Cannot read medium - incompatible format") },
+/* DT           */{SST(0x30, 0x03, SS_RDEF,
+			"Cleaning cartridge installed") },
+/* DT  WR O     */{SST(0x30, 0x04, SS_RDEF,
+			"Cannot write medium - unknown format") },
+/* DT  WR O     */{SST(0x30, 0x05, SS_RDEF,
+			"Cannot write medium - incompatible format") },
+/* DT  W  O     */{SST(0x30, 0x06, SS_RDEF,
+			"Cannot format medium - incompatible medium") },
+/* DTL WRSOM AE */{SST(0x30, 0x07, SS_RDEF,
+			"Cleaning failure") },
+/*      R       */{SST(0x30, 0x08, SS_RDEF,
+			"Cannot write - application code mismatch") },
+/*      R       */{SST(0x30, 0x09, SS_RDEF,
+			"Current session not fixated for append") },
+/* DT  WR O     */{SST(0x31, 0x00, SS_RDEF,
+			"Medium format corrupted") },
+/* D L  R O     */{SST(0x31, 0x01, SS_RDEF,
+			"Format command failed") },
+/* D   W  O     */{SST(0x32, 0x00, SS_RDEF,
+			"No defect spare location available") },
+/* D   W  O     */{SST(0x32, 0x01, SS_RDEF,
+			"Defect list update failure") },
+/*  T           */{SST(0x33, 0x00, SS_RDEF,
+			"Tape length error") },
+/* DTLPWRSOMCAE */{SST(0x34, 0x00, SS_RDEF,
+			"Enclosure failure") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x00, SS_RDEF,
+			"Enclosure services failure") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x01, SS_RDEF,
+			"Unsupported enclosure function") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x02, SS_RDEF,
+			"Enclosure services unavailable") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x03, SS_RDEF,
+			"Enclosure services transfer failure") },
+/* DTLPWRSOMCAE */{SST(0x35, 0x04, SS_RDEF,
+			"Enclosure services transfer refused") },
+/*   L          */{SST(0x36, 0x00, SS_RDEF,
+			"Ribbon, ink, or toner failure") },
+/* DTL WRSOMCAE */{SST(0x37, 0x00, SS_RDEF,
+			"Rounded parameter") },
+/* DTL WRSOMCAE */{SST(0x39, 0x00, SS_RDEF,
+			"Saving parameters not supported") },
+/* DTL WRSOM    */{SST(0x3A, 0x00, SS_NOP,
+			"Medium not present") },
+/* DT  WR OM    */{SST(0x3A, 0x01, SS_NOP,
+			"Medium not present - tray closed") },
+/* DT  WR OM    */{SST(0x3A, 0x01, SS_NOP,
+			"Medium not present - tray open") },
+/* DT  WR OM    */{SST(0x3A, 0x03, SS_NOP,
+			"Medium not present - Loadable") },
+/* DT  WR OM    */{SST(0x3A, 0x04, SS_NOP,
+			"Medium not present - medium auxiliary "
+			"memory accessible") },
+/* DT  WR OM    */{SST(0x3A, 0xFF, SS_NOP, NULL) },/* Range 0x05->0xFF */
+/*  TL          */{SST(0x3B, 0x00, SS_RDEF,
+			"Sequential positioning error") },
+/*  T           */{SST(0x3B, 0x01, SS_RDEF,
+			"Tape position error at beginning-of-medium") },
+/*  T           */{SST(0x3B, 0x02, SS_RDEF,
+			"Tape position error at end-of-medium") },
+/*   L          */{SST(0x3B, 0x03, SS_RDEF,
+			"Tape or electronic vertical forms unit not ready") },
+/*   L          */{SST(0x3B, 0x04, SS_RDEF,
+			"Slew failure") },
+/*   L          */{SST(0x3B, 0x05, SS_RDEF,
+			"Paper jam") },
+/*   L          */{SST(0x3B, 0x06, SS_RDEF,
+			"Failed to sense top-of-form") },
+/*   L          */{SST(0x3B, 0x07, SS_RDEF,
+			"Failed to sense bottom-of-form") },
+/*  T           */{SST(0x3B, 0x08, SS_RDEF,
+			"Reposition error") },
+/*       S      */{SST(0x3B, 0x09, SS_RDEF,
+			"Read past end of medium") },
+/*       S      */{SST(0x3B, 0x0A, SS_RDEF,
+			"Read past beginning of medium") },
+/*       S      */{SST(0x3B, 0x0B, SS_RDEF,
+			"Position past end of medium") },
+/*  T    S      */{SST(0x3B, 0x0C, SS_RDEF,
+			"Position past beginning of medium") },
+/* DT  WR OM    */{SST(0x3B, 0x0D, SS_FATAL|ENOSPC,
+			"Medium destination element full") },
+/* DT  WR OM    */{SST(0x3B, 0x0E, SS_RDEF,
+			"Medium source element empty") },
+/*      R       */{SST(0x3B, 0x0F, SS_RDEF,
+			"End of medium reached") },
+/* DT  WR OM    */{SST(0x3B, 0x11, SS_RDEF,
+			"Medium magazine not accessible") },
+/* DT  WR OM    */{SST(0x3B, 0x12, SS_RDEF,
+			"Medium magazine removed") },
+/* DT  WR OM    */{SST(0x3B, 0x13, SS_RDEF,
+			"Medium magazine inserted") },
+/* DT  WR OM    */{SST(0x3B, 0x14, SS_RDEF,
+			"Medium magazine locked") },
+/* DT  WR OM    */{SST(0x3B, 0x15, SS_RDEF,
+			"Medium magazine unlocked") },
+/* DTLPWRSOMCAE */{SST(0x3D, 0x00, SS_RDEF,
+			"Invalid bits in identify message") },
+/* DTLPWRSOMCAE */{SST(0x3E, 0x00, SS_RDEF,
+			"Logical unit has not self-configured yet") },
+/* DTLPWRSOMCAE */{SST(0x3E, 0x01, SS_RDEF,
+			"Logical unit failure") },
+/* DTLPWRSOMCAE */{SST(0x3E, 0x02, SS_RDEF,
+			"Timeout on logical unit") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x00, SS_RDEF,
+			"Target operating conditions have changed") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x01, SS_RDEF,
+			"Microcode has been changed") },
+/* DTLPWRSOMC   */{SST(0x3F, 0x02, SS_RDEF,
+			"Changed operating definition") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x03, SS_INQ_REFRESH|SSQ_DECREMENT_COUNT,
+			"Inquiry data has changed") },
+/* DT  WR OMCAE */{SST(0x3F, 0x04, SS_RDEF,
+			"Component device attached") },
+/* DT  WR OMCAE */{SST(0x3F, 0x05, SS_RDEF,
+			"Device identifier changed") },
+/* DT  WR OMCAE */{SST(0x3F, 0x06, SS_RDEF,
+			"Redundancy group created or modified") },
+/* DT  WR OMCAE */{SST(0x3F, 0x07, SS_RDEF,
+			"Redundancy group deleted") },
+/* DT  WR OMCAE */{SST(0x3F, 0x08, SS_RDEF,
+			"Spare created or modified") },
+/* DT  WR OMCAE */{SST(0x3F, 0x09, SS_RDEF,
+			"Spare deleted") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0A, SS_RDEF,
+			"Volume set created or modified") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0B, SS_RDEF,
+			"Volume set deleted") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0C, SS_RDEF,
+			"Volume set deassigned") },
+/* DT  WR OMCAE */{SST(0x3F, 0x0D, SS_RDEF,
+			"Volume set reassigned") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x0E, SS_RDEF,
+			"Reported luns data has changed") },
+/* DTLPWRSOMCAE */{SST(0x3F, 0x0F, SS_RETRY|SSQ_DECREMENT_COUNT
+				 | SSQ_DELAY_RANDOM|EBUSY,
+			"Echo buffer overwritten") },
+/* DT  WR OM   B*/{SST(0x3F, 0x0F, SS_RDEF, "Medium Loadable") },
+/* DT  WR OM   B*/{SST(0x3F, 0x0F, SS_RDEF,
+			"Medium auxiliary memory accessible") },
+/* D            */{SST(0x40, 0x00, SS_RDEF,
+			"Ram failure") }, /* deprecated - use 40 NN instead */
+/* DTLPWRSOMCAE */{SST(0x40, 0x80, SS_RDEF,
+			"Diagnostic failure: ASCQ = Component ID") },
+/* DTLPWRSOMCAE */{SST(0x40, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL) },/* Range 0x80->0xFF */
+/* D            */{SST(0x41, 0x00, SS_RDEF,
+			"Data path failure") }, /* deprecated - use 40 NN instead */
+/* D            */{SST(0x42, 0x00, SS_RDEF,
+			"Power-on or self-test failure") }, /* deprecated - use 40 NN instead */
+/* DTLPWRSOMCAE */{SST(0x43, 0x00, SS_RDEF,
+			"Message error") },
+/* DTLPWRSOMCAE */{SST(0x44, 0x00, SS_RDEF,
+			"Internal target failure") },
+/* DTLPWRSOMCAE */{SST(0x45, 0x00, SS_RDEF,
+			"Select or reselect failure") },
+/* DTLPWRSOMC   */{SST(0x46, 0x00, SS_RDEF,
+			"Unsuccessful soft reset") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x00, SS_RDEF|SSQ_FALLBACK,
+			"SCSI parity error") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x01, SS_RDEF|SSQ_FALLBACK,
+			"Data Phase CRC error detected") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x02, SS_RDEF|SSQ_FALLBACK,
+			"SCSI parity error detected during ST data phase") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x03, SS_RDEF|SSQ_FALLBACK,
+			"Information Unit iuCRC error") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x04, SS_RDEF|SSQ_FALLBACK,
+			"Asynchronous information protection error detected") },
+/* DTLPWRSOMCAE */{SST(0x47, 0x05, SS_RDEF|SSQ_FALLBACK,
+			"Protocol server CRC error") },
+/* DTLPWRSOMCAE */{SST(0x48, 0x00, SS_RDEF|SSQ_FALLBACK,
+			"Initiator detected error message received") },
+/* DTLPWRSOMCAE */{SST(0x49, 0x00, SS_RDEF,
+			"Invalid message error") },
+/* DTLPWRSOMCAE */{SST(0x4A, 0x00, SS_RDEF,
+			"Command phase error") },
+/* DTLPWRSOMCAE */{SST(0x4B, 0x00, SS_RDEF,
+			"Data phase error") },
+/* DTLPWRSOMCAE */{SST(0x4C, 0x00, SS_RDEF,
+			"Logical unit failed self-configuration") },
+/* DTLPWRSOMCAE */{SST(0x4D, 0x00, SS_RDEF,
+			"Tagged overlapped commands: ASCQ = Queue tag ID") },
+/* DTLPWRSOMCAE */{SST(0x4D, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL)}, /* Range 0x00->0xFF */
+/* DTLPWRSOMCAE */{SST(0x4E, 0x00, SS_RDEF,
+			"Overlapped commands attempted") },
+/*  T           */{SST(0x50, 0x00, SS_RDEF,
+			"Write append error") },
+/*  T           */{SST(0x50, 0x01, SS_RDEF,
+			"Write append position error") },
+/*  T           */{SST(0x50, 0x02, SS_RDEF,
+			"Position error related to timing") },
+/*  T     O     */{SST(0x51, 0x00, SS_RDEF,
+			"Erase failure") },
+/*  T           */{SST(0x52, 0x00, SS_RDEF,
+			"Cartridge fault") },
+/* DTL WRSOM    */{SST(0x53, 0x00, SS_RDEF,
+			"Media load or eject failed") },
+/*  T           */{SST(0x53, 0x01, SS_RDEF,
+			"Unload tape failure") },
+/* DT  WR OM    */{SST(0x53, 0x02, SS_RDEF,
+			"Medium removal prevented") },
+/*    P         */{SST(0x54, 0x00, SS_RDEF,
+			"Scsi to host system interface failure") },
+/*    P         */{SST(0x55, 0x00, SS_RDEF,
+			"System resource failure") },
+/* D      O     */{SST(0x55, 0x01, SS_FATAL|ENOSPC,
+			"System buffer full") },
+/*      R       */{SST(0x57, 0x00, SS_RDEF,
+			"Unable to recover table-of-contents") },
+/*        O     */{SST(0x58, 0x00, SS_RDEF,
+			"Generation does not exist") },
+/*        O     */{SST(0x59, 0x00, SS_RDEF,
+			"Updated block read") },
+/* DTLPWRSOM    */{SST(0x5A, 0x00, SS_RDEF,
+			"Operator request or state change input") },
+/* DT  WR OM    */{SST(0x5A, 0x01, SS_RDEF,
+			"Operator medium removal request") },
+/* DT  W  O     */{SST(0x5A, 0x02, SS_RDEF,
+			"Operator selected write protect") },
+/* DT  W  O     */{SST(0x5A, 0x03, SS_RDEF,
+			"Operator selected write permit") },
+/* DTLPWRSOM    */{SST(0x5B, 0x00, SS_RDEF,
+			"Log exception") },
+/* DTLPWRSOM    */{SST(0x5B, 0x01, SS_RDEF,
+			"Threshold condition met") },
+/* DTLPWRSOM    */{SST(0x5B, 0x02, SS_RDEF,
+			"Log counter at maximum") },
+/* DTLPWRSOM    */{SST(0x5B, 0x03, SS_RDEF,
+			"Log list codes exhausted") },
+/* D      O     */{SST(0x5C, 0x00, SS_RDEF,
+			"RPL status change") },
+/* D      O     */{SST(0x5C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
+			"Spindles synchronized") },
+/* D      O     */{SST(0x5C, 0x02, SS_RDEF,
+			"Spindles not synchronized") },
+/* DTLPWRSOMCAE */{SST(0x5D, 0x00, SS_RDEF,
+			"Failure prediction threshold exceeded") },
+/* DTLPWRSOMCAE */{SST(0x5D, 0xFF, SS_RDEF,
+			"Failure prediction threshold exceeded (false)") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x00, SS_RDEF,
+			"Low power condition on") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x01, SS_RDEF,
+			"Idle condition activated by timer") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x02, SS_RDEF,
+			"Standby condition activated by timer") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x03, SS_RDEF,
+			"Idle condition activated by command") },
+/* DTLPWRSO CA  */{SST(0x5E, 0x04, SS_RDEF,
+			"Standby condition activated by command") },
+/*       S      */{SST(0x60, 0x00, SS_RDEF,
+			"Lamp failure") },
+/*       S      */{SST(0x61, 0x00, SS_RDEF,
+			"Video acquisition error") },
+/*       S      */{SST(0x61, 0x01, SS_RDEF,
+			"Unable to acquire video") },
+/*       S      */{SST(0x61, 0x02, SS_RDEF,
+			"Out of focus") },
+/*       S      */{SST(0x62, 0x00, SS_RDEF,
+			"Scan head positioning error") },
+/*      R       */{SST(0x63, 0x00, SS_RDEF,
+			"End of user area encountered on this track") },
+/*      R       */{SST(0x63, 0x01, SS_FATAL|ENOSPC,
+			"Packet does not fit in available space") },
+/*      R       */{SST(0x64, 0x00, SS_RDEF,
+			"Illegal mode for this track") },
+/*      R       */{SST(0x64, 0x01, SS_RDEF,
+			"Invalid packet size") },
+/* DTLPWRSOMCAE */{SST(0x65, 0x00, SS_RDEF,
+			"Voltage fault") },
+/*       S      */{SST(0x66, 0x00, SS_RDEF,
+			"Automatic document feeder cover up") },
+/*       S      */{SST(0x66, 0x01, SS_RDEF,
+			"Automatic document feeder lift up") },
+/*       S      */{SST(0x66, 0x02, SS_RDEF,
+			"Document jam in automatic document feeder") },
+/*       S      */{SST(0x66, 0x03, SS_RDEF,
+			"Document miss feed automatic in document feeder") },
+/*           A  */{SST(0x67, 0x00, SS_RDEF,
+			"Configuration failure") },
+/*           A  */{SST(0x67, 0x01, SS_RDEF,
+			"Configuration of incapable logical units failed") },
+/*           A  */{SST(0x67, 0x02, SS_RDEF,
+			"Add logical unit failed") },
+/*           A  */{SST(0x67, 0x03, SS_RDEF,
+			"Modification of logical unit failed") },
+/*           A  */{SST(0x67, 0x04, SS_RDEF,
+			"Exchange of logical unit failed") },
+/*           A  */{SST(0x67, 0x05, SS_RDEF,
+			"Remove of logical unit failed") },
+/*           A  */{SST(0x67, 0x06, SS_RDEF,
+			"Attachment of logical unit failed") },
+/*           A  */{SST(0x67, 0x07, SS_RDEF,
+			"Creation of logical unit failed") },
+/*           A  */{SST(0x68, 0x00, SS_RDEF,
+			"Logical unit not configured") },
+/*           A  */{SST(0x69, 0x00, SS_RDEF,
+			"Data loss on logical unit") },
+/*           A  */{SST(0x69, 0x01, SS_RDEF,
+			"Multiple logical unit failures") },
+/*           A  */{SST(0x69, 0x02, SS_RDEF,
+			"Parity/data mismatch") },
+/*           A  */{SST(0x6A, 0x00, SS_RDEF,
+			"Informational, refer to log") },
+/*           A  */{SST(0x6B, 0x00, SS_RDEF,
+			"State change has occurred") },
+/*           A  */{SST(0x6B, 0x01, SS_RDEF,
+			"Redundancy level got better") },
+/*           A  */{SST(0x6B, 0x02, SS_RDEF,
+			"Redundancy level got worse") },
+/*           A  */{SST(0x6C, 0x00, SS_RDEF,
+			"Rebuild failure occurred") },
+/*           A  */{SST(0x6D, 0x00, SS_RDEF,
+			"Recalculate failure occurred") },
+/*           A  */{SST(0x6E, 0x00, SS_RDEF,
+			"Command to logical unit failed") },
+/*  T           */{SST(0x70, 0x00, SS_RDEF,
+			"Decompression exception short: ASCQ = Algorithm ID") },
+/*  T           */{SST(0x70, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL) }, /* Range 0x00 -> 0xFF */
+/*  T           */{SST(0x71, 0x00, SS_RDEF,
+			"Decompression exception long: ASCQ = Algorithm ID") },
+/*  T           */{SST(0x71, 0xFF, SS_RDEF|SSQ_RANGE,
+			NULL) }, /* Range 0x00 -> 0xFF */	
+/*      R       */{SST(0x72, 0x00, SS_RDEF,
+			"Session fixation error") },
+/*      R       */{SST(0x72, 0x01, SS_RDEF,
+			"Session fixation error writing lead-in") },
+/*      R       */{SST(0x72, 0x02, SS_RDEF,
+			"Session fixation error writing lead-out") },
+/*      R       */{SST(0x72, 0x03, SS_RDEF,
+			"Session fixation error - incomplete track in session") },
+/*      R       */{SST(0x72, 0x04, SS_RDEF,
+			"Empty or partially written reserved track") },
+/*      R       */{SST(0x73, 0x00, SS_RDEF,
+			"CD control error") },
+/*      R       */{SST(0x73, 0x01, SS_RDEF,
+			"Power calibration area almost full") },
+/*      R       */{SST(0x73, 0x02, SS_FATAL|ENOSPC,
+			"Power calibration area is full") },
+/*      R       */{SST(0x73, 0x03, SS_RDEF,
+			"Power calibration area error") },
+/*      R       */{SST(0x73, 0x04, SS_RDEF,
+			"Program memory area update failure") },
+/*      R       */{SST(0x73, 0x05, SS_RDEF,
+			"program memory area is full") }
+};
+
+static const int asc_table_size = sizeof(asc_table)/sizeof(asc_table[0]);
+
+struct asc_key
+{
+	int asc;
+	int ascq;
+};
+
+static int
+ascentrycomp(const void *key, const void *member)
+{
+	int asc;
+	int ascq;
+	const struct asc_table_entry *table_entry;
+
+	asc = ((const struct asc_key *)key)->asc;
+	ascq = ((const struct asc_key *)key)->ascq;
+	table_entry = (const struct asc_table_entry *)member;
+
+	if (asc >= table_entry->asc) {
+
+		if (asc > table_entry->asc)
+			return (1);
+
+		if (ascq <= table_entry->ascq) {
+			/* Check for ranges */
+			if (ascq == table_entry->ascq
+		 	 || ((table_entry->action & SSQ_RANGE) != 0
+		  	   && ascq >= (table_entry - 1)->ascq))
+				return (0);
+			return (-1);
+		}
+		return (1);
+	}
+	return (-1);
+}
+
+static int
+senseentrycomp(const void *key, const void *member)
+{
+	int sense_key;
+	const struct sense_key_table_entry *table_entry;
+
+	sense_key = *((const int *)key);
+	table_entry = (const struct sense_key_table_entry *)member;
+
+	if (sense_key >= table_entry->sense_key) {
+		if (sense_key == table_entry->sense_key)
+			return (0);
+		return (1);
+	}
+	return (-1);
+}
+
+static void
+fetchtableentries(int sense_key, int asc, int ascq,
+		  struct scsi_inquiry_data *inq_data,
+		  const struct sense_key_table_entry **sense_entry,
+		  const struct asc_table_entry **asc_entry)
+{
+	void *match;
+	const struct asc_table_entry *asc_tables[2];
+	const struct sense_key_table_entry *sense_tables[2];
+	struct asc_key asc_ascq;
+	size_t asc_tables_size[2];
+	size_t sense_tables_size[2];
+	int num_asc_tables;
+	int num_sense_tables;
+	int i;
+
+	/* Default to failure */
+	*sense_entry = NULL;
+	*asc_entry = NULL;
+	match = NULL;
+	if (inq_data != NULL)
+		match = cam_quirkmatch((void *)inq_data,
+				       (void *)sense_quirk_table,
+				       sense_quirk_table_size,
+				       sizeof(*sense_quirk_table),
+				       aic_inquiry_match);
+
+	if (match != NULL) {
+		struct scsi_sense_quirk_entry *quirk;
+
+		quirk = (struct scsi_sense_quirk_entry *)match;
+		asc_tables[0] = quirk->asc_info;
+		asc_tables_size[0] = quirk->num_ascs;
+		asc_tables[1] = asc_table;
+		asc_tables_size[1] = asc_table_size;
+		num_asc_tables = 2;
+		sense_tables[0] = quirk->sense_key_info;
+		sense_tables_size[0] = quirk->num_sense_keys;
+		sense_tables[1] = sense_key_table;
+		sense_tables_size[1] = sense_key_table_size;
+		num_sense_tables = 2;
+	} else {
+		asc_tables[0] = asc_table;
+		asc_tables_size[0] = asc_table_size;
+		num_asc_tables = 1;
+		sense_tables[0] = sense_key_table;
+		sense_tables_size[0] = sense_key_table_size;
+		num_sense_tables = 1;
+	}
+
+	asc_ascq.asc = asc;
+	asc_ascq.ascq = ascq;
+	for (i = 0; i < num_asc_tables; i++) {
+		void *found_entry;
+
+		found_entry = scsibsearch(&asc_ascq, asc_tables[i],
+					  asc_tables_size[i],
+					  sizeof(**asc_tables),
+					  ascentrycomp);
+
+		if (found_entry) {
+			*asc_entry = (struct asc_table_entry *)found_entry;
+			break;
+		}
+	}
+
+	for (i = 0; i < num_sense_tables; i++) {
+		void *found_entry;
+
+		found_entry = scsibsearch(&sense_key, sense_tables[i],
+					  sense_tables_size[i],
+					  sizeof(**sense_tables),
+					  senseentrycomp);
+
+		if (found_entry) {
+			*sense_entry =
+			    (struct sense_key_table_entry *)found_entry;
+			break;
+		}
+	}
+}
+
+static void *
+scsibsearch(const void *key, const void *base, size_t nmemb, size_t size,
+		 int (*compar)(const void *, const void *))
+{
+	const void *entry;
+	u_int l;
+	u_int u;
+	u_int m;
+
+	l = -1;
+	u = nmemb;
+	while (l + 1 != u) {
+		m = (l + u) / 2;
+		entry = base + m * size;
+		if (compar(key, entry) > 0)
+			l = m;
+		else
+			u = m;
+	}
+
+	entry = base + u * size;
+	if (u == nmemb
+	 || compar(key, entry) != 0)
+		return (NULL);
+
+	return ((void *)entry);
+}
+
+/*
+ * Compare string with pattern, returning 0 on match.
+ * Short pattern matches trailing blanks in name,
+ * wildcard '*' in pattern matches rest of name,
+ * wildcard '?' matches a single non-space character.
+ */
+static int
+cam_strmatch(const uint8_t *str, const uint8_t *pattern, int str_len)
+{
+
+	while (*pattern != '\0'&& str_len > 0) {  
+
+		if (*pattern == '*') {
+			return (0);
+		}
+		if ((*pattern != *str)
+		 && (*pattern != '?' || *str == ' ')) {
+			return (1);
+		}
+		pattern++;
+		str++;
+		str_len--;
+	}
+	while (str_len > 0 && *str++ == ' ')
+		str_len--;
+
+	return (str_len);
+}
+
+static caddr_t
+cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
+	       int entry_size, cam_quirkmatch_t *comp_func)
+{
+	for (; num_entries > 0; num_entries--, quirk_table += entry_size) {
+		if ((*comp_func)(target, quirk_table) == 0)
+			return (quirk_table);
+	}
+	return (NULL);
+}
+
+void
+aic_sense_desc(int sense_key, int asc, int ascq,
+	       struct scsi_inquiry_data *inq_data,
+	       const char **sense_key_desc, const char **asc_desc)
+{
+	const struct asc_table_entry *asc_entry;
+	const struct sense_key_table_entry *sense_entry;
+
+	fetchtableentries(sense_key, asc, ascq,
+			  inq_data,
+			  &sense_entry,
+			  &asc_entry);
+
+	*sense_key_desc = sense_entry->desc;
+
+	if (asc_entry != NULL)
+		*asc_desc = asc_entry->desc;
+	else if (asc >= 0x80 && asc <= 0xff)
+		*asc_desc = "Vendor Specific ASC";
+	else if (ascq >= 0x80 && ascq <= 0xff)
+		*asc_desc = "Vendor Specific ASCQ";
+	else
+		*asc_desc = "Reserved ASC/ASCQ pair";
+}
+
+/*
+ * Given sense and device type information, return the appropriate action.
+ * If we do not understand the specific error as identified by the ASC/ASCQ
+ * pair, fall back on the more generic actions derived from the sense key.
+ */
+aic_sense_action
+aic_sense_error_action(struct scsi_sense_data *sense_data,
+		       struct scsi_inquiry_data *inq_data, uint32_t sense_flags)
+{
+	const struct asc_table_entry *asc_entry;
+	const struct sense_key_table_entry *sense_entry;
+	int error_code, sense_key, asc, ascq;
+	aic_sense_action action;
+
+	scsi_extract_sense(sense_data, &error_code, &sense_key, &asc, &ascq);
+
+	if (error_code == SSD_DEFERRED_ERROR) {
+		/*
+		 * XXX dufault@FreeBSD.org
+		 * This error doesn't relate to the command associated
+		 * with this request sense.  A deferred error is an error
+		 * for a command that has already returned GOOD status
+		 * (see SCSI2 8.2.14.2).
+		 *
+		 * By my reading of that section, it looks like the current
+		 * command has been cancelled, we should now clean things up
+		 * (hopefully recovering any lost data) and then retry the
+		 * current command.  There are two easy choices, both wrong:
+		 *
+		 * 1. Drop through (like we had been doing), thus treating
+		 *    this as if the error were for the current command and
+		 *    return and stop the current command.
+		 * 
+		 * 2. Issue a retry (like I made it do) thus hopefully
+		 *    recovering the current transfer, and ignoring the
+		 *    fact that we've dropped a command.
+		 *
+		 * These should probably be handled in a device specific
+		 * sense handler or punted back up to a user mode daemon
+		 */
+		action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE;
+	} else {
+		fetchtableentries(sense_key, asc, ascq,
+				  inq_data,
+				  &sense_entry,
+				  &asc_entry);
+
+		/*
+		 * Override the 'No additional Sense' entry (0,0)
+		 * with the error action of the sense key.
+		 */
+		if (asc_entry != NULL
+		 && (asc != 0 || ascq != 0))
+			action = asc_entry->action;
+		else
+			action = sense_entry->action;
+
+		if (sense_key == SSD_KEY_RECOVERED_ERROR) {
+			/*
+			 * The action succeeded but the device wants
+			 * the user to know that some recovery action
+			 * was required.
+			 */
+			action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK);
+			action |= SS_NOP|SSQ_PRINT_SENSE;
+		} else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) {
+			if ((sense_flags & SF_QUIET_IR) != 0)
+				action &= ~SSQ_PRINT_SENSE;
+		} else if (sense_key == SSD_KEY_UNIT_ATTENTION) {
+			if ((sense_flags & SF_RETRY_UA) != 0
+			 && (action & SS_MASK) == SS_FAIL) {
+				action &= ~(SS_MASK|SSQ_MASK);
+				action |= SS_RETRY|SSQ_DECREMENT_COUNT|
+					  SSQ_PRINT_SENSE;
+			}
+		}
+	}
+
+	if ((sense_flags & SF_PRINT_ALWAYS) != 0)
+		action |= SSQ_PRINT_SENSE;
+	else if ((sense_flags & SF_NO_PRINT) != 0)
+		action &= ~SSQ_PRINT_SENSE;
+
+	return (action);
+}
+
+/*      
+ * Try make as good a match as possible with
+ * available sub drivers
+ */
+int
+aic_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
+{
+	struct scsi_inquiry_pattern *entry;
+	struct scsi_inquiry_data *inq;
+ 
+	entry = (struct scsi_inquiry_pattern *)table_entry;
+	inq = (struct scsi_inquiry_data *)inqbuffer;
+
+	if (((SID_TYPE(inq) == entry->type)
+	  || (entry->type == T_ANY))
+	 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
+				   : entry->media_type & SIP_MEDIA_FIXED)
+	 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
+	 && (cam_strmatch(inq->product, entry->product,
+			  sizeof(inq->product)) == 0)
+	 && (cam_strmatch(inq->revision, entry->revision,
+			  sizeof(inq->revision)) == 0)) {
+		return (0);
+	}
+        return (-1);
+}
+
+/*
+ * Table of syncrates that don't follow the "divisible by 4"
+ * rule. This table will be expanded in future SCSI specs.
+ */
+static struct {
+	u_int period_factor;
+	u_int period;	/* in 100ths of ns */
+} scsi_syncrates[] = {
+	{ 0x08, 625 },	/* FAST-160 */
+	{ 0x09, 1250 },	/* FAST-80 */
+	{ 0x0a, 2500 },	/* FAST-40 40MHz */
+	{ 0x0b, 3030 },	/* FAST-40 33MHz */
+	{ 0x0c, 5000 }	/* FAST-20 */
+};
+
+/*
+ * Return the frequency in kHz corresponding to the given
+ * sync period factor.
+ */
+u_int
+aic_calc_syncsrate(u_int period_factor)
+{
+	int i;
+	int num_syncrates;
+
+	num_syncrates = sizeof(scsi_syncrates) / sizeof(scsi_syncrates[0]);
+	/* See if the period is in the "exception" table */
+	for (i = 0; i < num_syncrates; i++) {
+
+		if (period_factor == scsi_syncrates[i].period_factor) {
+			/* Period in kHz */
+			return (100000000 / scsi_syncrates[i].period);
+		}
+	}
+
+	/*
+	 * Wasn't in the table, so use the standard
+	 * 4 times conversion.
+	 */
+	return (10000000 / (period_factor * 4 * 10));
+}
+
+/*
+ * Return speed in KB/s.
+ */
+u_int
+aic_calc_speed(u_int width, u_int period, u_int offset, u_int min_rate)
+{
+	u_int freq;
+
+	if (offset != 0 && period < min_rate)
+		freq  = aic_calc_syncsrate(period);
+	else
+		/* Roughly 3.3MB/s for async */
+		freq  = 3300;
+	freq <<= width;
+	return (freq);
+}
+
+uint32_t
+aic_error_action(struct scsi_cmnd *cmd, struct scsi_inquiry_data *inq_data,
+		 cam_status status, u_int scsi_status)
+{
+	aic_sense_action  err_action;
+	int		  sense;
+
+	sense  = (cmd->result >> 24) == DRIVER_SENSE;
+
+	switch (status) {
+	case CAM_REQ_CMP:
+		err_action = SS_NOP;
+		break;
+	case CAM_AUTOSENSE_FAIL:
+	case CAM_SCSI_STATUS_ERROR:
+
+		switch (scsi_status) {
+		case SCSI_STATUS_OK:
+		case SCSI_STATUS_COND_MET:
+		case SCSI_STATUS_INTERMED:
+		case SCSI_STATUS_INTERMED_COND_MET:
+			err_action = SS_NOP;
+			break;
+		case SCSI_STATUS_CMD_TERMINATED:
+		case SCSI_STATUS_CHECK_COND:
+			if (sense != 0) {
+				struct scsi_sense_data *sense;
+
+				sense = (struct scsi_sense_data *)
+				    &cmd->sense_buffer;
+				err_action =
+				    aic_sense_error_action(sense, inq_data, 0);
+
+			} else {
+				err_action = SS_RETRY|SSQ_FALLBACK
+					   | SSQ_DECREMENT_COUNT|EIO;
+			}
+			break;
+		case SCSI_STATUS_QUEUE_FULL:
+		case SCSI_STATUS_BUSY:
+			err_action = SS_RETRY|SSQ_DELAY|SSQ_MANY
+				   | SSQ_DECREMENT_COUNT|EBUSY;
+			break;
+		case SCSI_STATUS_RESERV_CONFLICT:
+		default:
+			err_action = SS_FAIL|EBUSY;
+			break;
+		}
+		break;
+	case CAM_CMD_TIMEOUT:
+	case CAM_REQ_CMP_ERR:
+	case CAM_UNEXP_BUSFREE:
+	case CAM_UNCOR_PARITY:
+	case CAM_DATA_RUN_ERR:
+		err_action = SS_RETRY|SSQ_FALLBACK|EIO;
+		break;
+	case CAM_UA_ABORT:
+	case CAM_UA_TERMIO:
+	case CAM_MSG_REJECT_REC:
+	case CAM_SEL_TIMEOUT:
+		err_action = SS_FAIL|EIO;
+		break;
+	case CAM_REQ_INVALID:
+	case CAM_PATH_INVALID:
+	case CAM_DEV_NOT_THERE:
+	case CAM_NO_HBA:
+	case CAM_PROVIDE_FAIL:
+	case CAM_REQ_TOO_BIG:		
+	case CAM_RESRC_UNAVAIL:
+	case CAM_BUSY:
+	default:
+		/* panic??  These should never occur in our application. */
+		err_action = SS_FAIL|EIO;
+		break;
+	case CAM_SCSI_BUS_RESET:
+	case CAM_BDR_SENT:		
+	case CAM_REQUEUE_REQ:
+		/* Unconditional requeue */
+		err_action = SS_RETRY;
+		break;
+	}
+
+	return (err_action);
+}
+
+char *
+aic_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
+		       aic_option_callback_t *callback, u_long callback_arg)
+{
+	char	*tok_end;
+	char	*tok_end2;
+	int      i;
+	int      instance;
+	int	 targ;
+	int	 done;
+	char	 tok_list[] = {'.', ',', '{', '}', '\0'};
+
+	/* All options use a ':' name/arg separator */
+	if (*opt_arg != ':')
+		return (opt_arg);
+	opt_arg++;
+	instance = -1;
+	targ = -1;
+	done = FALSE;
+	/*
+	 * Restore separator that may be in
+	 * the middle of our option argument.
+	 */
+	tok_end = strchr(opt_arg, '\0');
+	if (tok_end < end)
+		*tok_end = ',';
+	while (!done) {
+		switch (*opt_arg) {
+		case '{':
+			if (instance == -1) {
+				instance = 0;
+			} else {
+				if (depth > 1) {
+					if (targ == -1)
+						targ = 0;
+				} else {
+					printf("Malformed Option %s\n",
+					       opt_name);
+					done = TRUE;
+				}
+			}
+			opt_arg++;
+			break;
+		case '}':
+			if (targ != -1)
+				targ = -1;
+			else if (instance != -1)
+				instance = -1;
+			opt_arg++;
+			break;
+		case ',':
+		case '.':
+			if (instance == -1)
+				done = TRUE;
+			else if (targ >= 0)
+				targ++;
+			else if (instance >= 0)
+				instance++;
+			opt_arg++;
+			break;
+		case '\0':
+			done = TRUE;
+			break;
+		default:
+			tok_end = end;
+			for (i = 0; tok_list[i]; i++) {
+				tok_end2 = strchr(opt_arg, tok_list[i]);
+				if ((tok_end2) && (tok_end2 < tok_end))
+					tok_end = tok_end2;
+			}
+			callback(callback_arg, instance, targ,
+				 simple_strtol(opt_arg, NULL, 0));
+			opt_arg = tok_end;
+			break;
+		}
+	}
+	return (opt_arg);
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)