patch-2.4.22 linux-2.4.22/drivers/net/ibm_emac/ibm_ocp_phy.c

• Lines: 244
• Date: 2003-08-25 04:44:42.000000000 -0700
• Orig file: linux-2.4.21/drivers/net/ibm_emac/ibm_ocp_phy.c
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/drivers/net/ibm_emac/ibm_ocp_phy.c linux-2.4.22/drivers/net/ibm_emac/ibm_ocp_phy.c
@@ -0,0 +1,243 @@
+/*
+ * ibm_ocp_phy.c
+ *
+ * PHY drivers for the ibm ocp ethernet driver. Borrowed
+ * from sungem_phy.c, though I only kept the generic MII
+ * driver for now.
+ * 
+ * This file should be shared with other drivers or eventually
+ * merged as the "low level" part of miilib
+ * 
+ * (c) 2003, Benjamin Herrenscmidt (benh@kernel.crashing.org)
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+
+#include "ibm_ocp_phy.h"
+
+
+static inline int __phy_read(struct mii_phy* phy, int id, int reg)
+{
+	return phy->mdio_read(phy->dev, id, reg);
+}
+
+static inline void __phy_write(struct mii_phy* phy, int id, int reg, int val)
+{
+	phy->mdio_write(phy->dev, id, reg, val);
+}
+
+static inline int phy_read(struct mii_phy* phy, int reg)
+{
+	return phy->mdio_read(phy->dev, phy->mii_id, reg);
+}
+
+static inline void phy_write(struct mii_phy* phy, int reg, int val)
+{
+	phy->mdio_write(phy->dev, phy->mii_id, reg, val);
+}
+
+static int reset_one_mii_phy(struct mii_phy* phy, int phy_id)
+{
+	u16 val;
+	int limit = 10000;
+	
+	val = __phy_read(phy, phy_id, MII_BMCR);
+	val &= ~BMCR_ISOLATE;
+	val |= BMCR_RESET;
+	__phy_write(phy, phy_id, MII_BMCR, val);
+
+	udelay(100);
+
+	while (limit--) {
+		val = __phy_read(phy, phy_id, MII_BMCR);
+		if ((val & BMCR_RESET) == 0)
+			break;
+		udelay(10);
+	}
+	if ((val & BMCR_ISOLATE) && limit > 0)
+		__phy_write(phy, phy_id, MII_BMCR, val & ~BMCR_ISOLATE);
+	
+	return (limit <= 0);
+}
+
+static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise)
+{
+	u16 ctl, adv;
+	
+	phy->autoneg = 1;
+	phy->speed = SPEED_10;
+	phy->duplex = DUPLEX_HALF;
+	phy->pause = 0;
+	phy->advertising = advertise;
+
+	/* Setup standard advertise */
+	adv = phy_read(phy, MII_ADVERTISE);
+	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
+	if (advertise & ADVERTISED_10baseT_Half)
+		adv |= ADVERTISE_10HALF;
+	if (advertise & ADVERTISED_10baseT_Full)
+		adv |= ADVERTISE_10FULL;
+	if (advertise & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	phy_write(phy, MII_ADVERTISE, adv);
+
+	/* Start/Restart aneg */
+	ctl = phy_read(phy, MII_BMCR);
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+	phy_write(phy, MII_BMCR, ctl);
+
+	return 0;
+}
+
+static int genmii_setup_forced(struct mii_phy *phy, int speed, int fd)
+{
+	u16 ctl;
+	
+	phy->autoneg = 0;
+	phy->speed = speed;
+	phy->duplex = fd;
+	phy->pause = 0;
+
+	ctl = phy_read(phy, MII_BMCR);
+	ctl &= ~(BMCR_FULLDPLX|BMCR_SPEED100|BMCR_ANENABLE);
+
+	/* First reset the PHY */
+	phy_write(phy, MII_BMCR, ctl | BMCR_RESET);
+
+	/* Select speed & duplex */
+	switch(speed) {
+	case SPEED_10:
+		break;
+	case SPEED_100:
+		ctl |= BMCR_SPEED100;
+		break;
+	case SPEED_1000:
+	default:
+		return -EINVAL;
+	}
+	if (fd == DUPLEX_FULL)
+		ctl |= BMCR_FULLDPLX;
+	phy_write(phy, MII_BMCR, ctl);
+
+	return 0;
+}
+
+static int genmii_poll_link(struct mii_phy *phy)
+{
+	u16 status;
+	
+	(void)phy_read(phy, MII_BMSR);
+	status = phy_read(phy, MII_BMSR);
+	if ((status & BMSR_LSTATUS) == 0)
+		return 0;
+	if (phy->autoneg && !(status & BMSR_ANEGCOMPLETE))
+		return 0;
+	return 1;
+}
+
+static int genmii_read_link(struct mii_phy *phy)
+{
+	u16 lpa;
+
+	if (phy->autoneg) {
+		lpa = phy_read(phy, MII_LPA);
+
+		if (lpa & (LPA_10FULL | LPA_100FULL))
+			phy->duplex = DUPLEX_FULL;
+		else
+			phy->duplex = DUPLEX_HALF;
+		if (lpa & (LPA_100FULL | LPA_100HALF))
+			phy->speed = SPEED_100;
+		else
+			phy->speed = SPEED_10;
+		phy->pause = 0;
+	}
+	/* On non-aneg, we assume what we put in BMCR is the speed,
+	 * though magic-aneg shouldn't prevent this case from occurring
+	 */
+
+	 return 0;
+}
+
+
+#define MII_BASIC_FEATURES	(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)
+#define MII_GBIT_FEATURES	(MII_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)
+
+
+/* Generic implementation for most 10/100 PHYs */
+static struct mii_phy_ops generic_phy_ops = {
+	setup_aneg:	genmii_setup_aneg,
+	setup_forced:	genmii_setup_forced,
+	poll_link:	genmii_poll_link,
+	read_link:	genmii_read_link
+};
+
+static struct mii_phy_def genmii_phy_def = {
+	phy_id:		0x00000000,
+	phy_id_mask:	0x00000000,
+	name:		"Generic MII",
+	features:	MII_BASIC_FEATURES,
+	magic_aneg:	0,
+	ops:		&generic_phy_ops
+};
+
+static struct mii_phy_def* mii_phy_table[] = {
+	&genmii_phy_def,
+	NULL
+};
+
+int mii_phy_probe(struct mii_phy *phy, int mii_id)
+{
+	int rc;
+	u32 id;
+	struct mii_phy_def* def;
+	int i;
+	
+	phy->autoneg = 0;
+	phy->advertising = 0;
+	phy->mii_id = mii_id;
+	phy->speed = 0;
+	phy->duplex = 0;
+	phy->pause = 0;
+	
+	/* Take PHY out of isloate mode and reset it. */
+	rc = reset_one_mii_phy(phy, mii_id);
+	if (rc)
+		return -ENODEV;
+
+	/* Read ID and find matching entry */	
+	id = (phy_read(phy, MII_PHYSID1) << 16 | phy_read(phy, MII_PHYSID2))
+			 	& 0xfffffff0;
+	for (i=0; (def = mii_phy_table[i]) != NULL; i++)
+		if ((id & def->phy_id_mask) == def->phy_id)
+			break;
+	/* Should never be NULL (we have a generic entry), but... */
+	if (def == NULL)
+		return -ENODEV;
+
+	phy->def = def;
+
+	/* Setup default advertising */
+	phy->advertising = def->features;
+
+	return 0;
+}
+
+MODULE_LICENSE("GPL");