patch-2.4.22 linux-2.4.22/arch/mips/dec/ecc-berr.c

• Lines: 281
• Date: 2003-08-25 04:44:39.000000000 -0700
• Orig file: linux-2.4.21/arch/mips/dec/ecc-berr.c
• Orig date: 1969-12-31 16:00:00.000000000 -0800

diff -urN linux-2.4.21/arch/mips/dec/ecc-berr.c linux-2.4.22/arch/mips/dec/ecc-berr.c
@@ -0,0 +1,280 @@
+/*
+ *	linux/arch/mips/dec/ecc-berr.c
+ *
+ *	Bus error event handling code for systems equipped with ECC
+ *	handling logic, i.e. DECstation/DECsystem 5000/200 (KN02),
+ *	5000/240 (KN03), 5000/260 (KN05) and DECsystem 5900 (KN03),
+ *	5900/260 (KN05) systems.
+ *
+ *	Copyright (c) 2003  Maciej W. Rozycki
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; either version
+ *	2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+
+#include <asm/dec/ecc.h>
+#include <asm/dec/kn02.h>
+#include <asm/dec/kn03.h>
+#include <asm/dec/kn05.h>
+
+static volatile u32 *kn0x_erraddr;
+static volatile u32 *kn0x_chksyn;
+
+static inline void dec_ecc_be_ack(void)
+{
+	*kn0x_erraddr = 0;			/* any write clears the IRQ */
+	iob();
+}
+
+static int dec_ecc_be_backend(struct pt_regs *regs, int is_fixup, int invoker)
+{
+	static const char excstr[] = "exception";
+	static const char intstr[] = "interrupt";
+	static const char cpustr[] = "CPU";
+	static const char dmastr[] = "DMA";
+	static const char readstr[] = "read";
+	static const char mreadstr[] = "memory read";
+	static const char writestr[] = "write";
+	static const char mwritstr[] = "partial memory write";
+	static const char timestr[] = "timeout";
+	static const char overstr[] = "overrun";
+	static const char eccstr[] = "ECC error";
+
+	const char *kind, *agent, *cycle, *event;
+	const char *status = "", *xbit = "", *fmt = "";
+	dma_addr_t address;
+	u16 syn = 0, sngl;
+
+	int i = 0;
+
+	u32 erraddr = *kn0x_erraddr;
+	u32 chksyn = *kn0x_chksyn;
+	int action = MIPS_BE_FATAL;
+
+	/* For non-ECC ack ASAP, so any subsequent errors get caught. */
+	if ((erraddr & (KN0X_EAR_VALID | KN0X_EAR_ECCERR)) == KN0X_EAR_VALID)
+		dec_ecc_be_ack();
+
+	kind = invoker ? intstr : excstr;
+
+	if (!(erraddr & KN0X_EAR_VALID)) {
+		/* No idea what happened. */
+		printk(KERN_ALERT "Unindentified bus error %s.\n", kind);
+		return action;
+	}
+
+	agent = (erraddr & KN0X_EAR_CPU) ? cpustr : dmastr;
+
+	if (erraddr & KN0X_EAR_ECCERR) {
+		/* An ECC error on a CPU or DMA transaction. */
+		cycle = (erraddr & KN0X_EAR_WRITE) ? mwritstr : mreadstr;
+		event = eccstr;
+	} else {
+		/* A CPU timeout or a DMA overrun. */
+		cycle = (erraddr & KN0X_EAR_WRITE) ? writestr : readstr;
+		event = (erraddr & KN0X_EAR_CPU) ? timestr : overstr;
+	}
+
+	address = erraddr & KN0X_EAR_ADDRESS;
+	/* For ECC errors on reads adjust for MT pipelining. */
+	if ((erraddr & (KN0X_EAR_WRITE | KN0X_EAR_ECCERR)) == KN0X_EAR_ECCERR)
+		address = (address & ~0xfffLL) | ((address - 5) & 0xfffLL);
+	address <<= 2;
+
+	/* Only CPU errors are fixable. */
+	if (erraddr & KN0X_EAR_CPU && is_fixup)
+		action = MIPS_BE_FIXUP;
+
+	if (erraddr & KN0X_EAR_ECCERR) {
+		static const u8 data_sbit[32] = {
+			0x4f, 0x4a, 0x52, 0x54, 0x57, 0x58, 0x5b, 0x5d,
+			0x23, 0x25, 0x26, 0x29, 0x2a, 0x2c, 0x31, 0x34,
+			0x0e, 0x0b, 0x13, 0x15, 0x16, 0x19, 0x1a, 0x1c,
+			0x62, 0x64, 0x67, 0x68, 0x6b, 0x6d, 0x70, 0x75,
+		};
+		static const u8 data_mbit[25] = {
+			0x07, 0x0d, 0x1f,
+			0x2f, 0x32, 0x37, 0x38, 0x3b, 0x3d, 0x3e,
+			0x43, 0x45, 0x46, 0x49, 0x4c, 0x51, 0x5e,
+			0x61, 0x6e, 0x73, 0x76, 0x79, 0x7a, 0x7c, 0x7f,
+		};
+		static const char sbestr[] = "corrected single";
+		static const char dbestr[] = "uncorrectable double";
+		static const char mbestr[] = "uncorrectable multiple";
+
+		if (!(address & 0x4))
+			syn = chksyn;			/* Low bank. */
+		else
+			syn = chksyn >> 16;		/* High bank. */
+
+		if (!(syn & KN0X_ESR_VLDLO)) {
+			/* Ack now, no rewrite will happen. */
+			dec_ecc_be_ack();
+
+			fmt = KERN_ALERT "%s" "invalid.\n";
+		} else {
+			sngl = syn & KN0X_ESR_SNGLO;
+			syn &= KN0X_ESR_SYNLO;
+
+			/*
+			 * Multibit errors may be tagged incorrectly;
+			 * check the syndrome explicitly.
+			 */
+			for (i = 0; i < 25; i++)
+				if (syn == data_mbit[i])
+					break;
+
+			if (i < 25) {
+				status = mbestr;
+			} else if (!sngl) {
+				status = dbestr;
+			} else {
+				volatile u32 *ptr = (void *)KSEG1ADDR(address);
+
+				*ptr = *ptr;		/* Rewrite. */
+				iob();
+
+				status = sbestr;
+				action = MIPS_BE_DISCARD;
+			}
+
+			/* Ack now, now we've rewritten (or not). */
+			dec_ecc_be_ack();
+
+			if (syn && syn == (syn & -syn)) {
+				if (syn == 0x01) {
+					fmt = KERN_ALERT "%s"
+					      "%#04x -- %s bit error "
+					      "at check bit C%s.\n";
+					xbit = "X";
+				} else {
+					fmt = KERN_ALERT "%s"
+					      "%#04x -- %s bit error "
+					      "at check bit C%s%u.\n";
+				}
+				i = syn >> 2;
+			} else {
+				for (i = 0; i < 32; i++)
+					if (syn == data_sbit[i])
+						break;
+				if (i < 32)
+					fmt = KERN_ALERT "%s"
+					      "%#04x -- %s bit error "
+					      "at data bit D%s%u.\n";
+				else
+					fmt = KERN_ALERT "%s"
+					      "%#04x -- %s bit error.\n";
+			}
+		}
+	}
+
+	if (action != MIPS_BE_FIXUP)
+		printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx.\n",
+			kind, agent, cycle, event, address);
+
+	if (action != MIPS_BE_FIXUP && erraddr & KN0X_EAR_ECCERR)
+		printk(fmt, "  ECC syndrome ", syn, status, xbit, i);
+
+	return action;
+}
+
+int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	return dec_ecc_be_backend(regs, is_fixup, 0);
+}
+
+void dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	int action = dec_ecc_be_backend(regs, 0, 1);
+
+	if (action == MIPS_BE_DISCARD)
+		return;
+
+	/*
+	 * FIXME: Find affected processes and kill them, otherwise we
+	 * must die.
+	 *
+	 * The interrupt is asynchronously delivered thus EPC and RA
+	 * may be irrelevant, but are printed for a reference.
+	 */
+	printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
+	       regs->cp0_epc, regs->regs[31]);
+	die("Unrecoverable bus error", regs);
+}
+
+
+/*
+ * Initialization differs a bit between KN02 and KN03/KN05, so we
+ * need two variants.  Once set up, all systems can be handled the
+ * same way.
+ */
+static inline void dec_kn02_be_init(void)
+{
+	volatile u32 *csr = (void *)KN02_CSR_BASE;
+	unsigned long flags;
+
+	kn0x_erraddr = (void *)(KN02_SLOT_BASE + KN02_ERRADDR);
+	kn0x_chksyn = (void *)(KN02_SLOT_BASE + KN02_CHKSYN);
+
+	spin_lock_irqsave(&kn02_lock, flags);
+
+	/* Preset write-only bits of the Control Register cache. */
+	cached_kn02_csr = *csr | KN03_CSR_LEDS;
+
+	/* Set normal ECC detection and generation. */
+	cached_kn02_csr &= ~(KN02_CSR_DIAGCHK | KN02_CSR_DIAGGEN);
+	/* Enable ECC correction. */
+	cached_kn02_csr |= KN02_CSR_CORRECT;
+	*csr = cached_kn02_csr;
+	iob();
+
+	spin_unlock_irqrestore(&kn02_lock, flags);
+}
+
+static inline void dec_kn03_be_init(void)
+{
+	volatile u32 *mcr = (void *)(KN03_SLOT_BASE + IOASIC_MCR);
+	volatile u32 *mbcs = (void *)(KN03_SLOT_BASE + KN05_MB_CSR);
+
+	kn0x_erraddr = (void *)(KN03_SLOT_BASE + IOASIC_ERRADDR);
+	kn0x_chksyn = (void *)(KN03_SLOT_BASE + IOASIC_CHKSYN);
+			
+	/*
+	 * Set normal ECC detection and generation, enable ECC correction.
+	 * For KN05 we also need to make sure EE (?) is enabled in the MB.
+	 * Otherwise DBE/IBE exceptions would be masked but bus error
+	 * interrupts would still arrive, resulting in an inevitable crash
+	 * if get_dbe() triggers one.
+	 */
+	*mcr = (*mcr & ~(KN03_MCR_DIAGCHK | KN03_MCR_DIAGGEN)) |
+	       KN03_MCR_CORRECT;
+	if (current_cpu_data.cputype == CPU_R4400SC)
+		*mbcs |= KN05_MB_CSR_EE;
+	fast_iob();
+}
+
+void __init dec_ecc_be_init(void)
+{
+	if (mips_machtype == MACH_DS5000_200)
+		dec_kn02_be_init();
+	else
+		dec_kn03_be_init();
+
+	/* Clear any leftover errors from the firmware. */
+	dec_ecc_be_ack();
+}