patch-2.4.22 linux-2.4.22/arch/mips/au1000/pb1100/board_setup.c

Next file: linux-2.4.22/arch/mips/au1000/pb1100/irqmap.c
Previous file: linux-2.4.22/arch/mips/au1000/pb1100/Makefile
Back to the patch index
Back to the overall index

diff -urN linux-2.4.21/arch/mips/au1000/pb1100/board_setup.c linux-2.4.22/arch/mips/au1000/pb1100/board_setup.c
@@ -0,0 +1,138 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Alchemy Pb1100 board setup.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/keyboard.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/au1000.h>
+#include <asm/pb1100.h>
+
+#ifdef CONFIG_USB_OHCI
+// Enable the workaround for the OHCI DoneHead
+// register corruption problem.
+#define CONFIG_AU1000_OHCI_FIX
+#endif
+
+#ifdef CONFIG_RTC
+extern struct rtc_ops pb1500_rtc_ops;
+#endif
+
+void __init board_setup(void)
+{
+	u32 pin_func;
+	u32 sys_freqctrl, sys_clksrc;
+
+	// set AUX clock to 12MHz * 8 = 96 MHz
+	au_writel(8, SYS_AUXPLL);
+	au_writel(0, SYS_PININPUTEN);
+	udelay(100);
+
+#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
+#ifdef CONFIG_USB_OHCI
+	if ((argptr = strstr(argptr, "usb_ohci=")) == NULL) {
+	        char usb_args[80];
+		argptr = prom_getcmdline();
+		memset(usb_args, 0, sizeof(usb_args));
+		sprintf(usb_args, " usb_ohci=base:0x%x,len:0x%x,irq:%d",
+			USB_OHCI_BASE, USB_OHCI_LEN, AU1000_USB_HOST_INT);
+		strcat(argptr, usb_args);
+	}
+#endif
+	// configure pins GPIO[14:9] as GPIO
+	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+
+	/* zero and disable FREQ2 */
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+	/* zero and disable USBH/USBD/IrDA clock */
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~0x0000001F;
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	sys_freqctrl = au_readl(SYS_FREQCTRL0);
+	sys_freqctrl &= ~0xFFF00000;
+
+	sys_clksrc = au_readl(SYS_CLKSRC);
+	sys_clksrc &= ~0x0000001F;
+
+	// FREQ2 = aux/2 = 48 MHz
+	sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+	au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+	/*
+	 * Route 48MHz FREQ2 into USBH/USBD/IrDA
+	 */
+	sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+	au_writel(sys_clksrc, SYS_CLKSRC);
+
+	/* setup the static bus controller */
+	au_writel(0x00000002, MEM_STCFG3);  /* type = PCMCIA */
+	au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
+	au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
+
+	// get USB Functionality pin state (device vs host drive pins)
+	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
+#ifndef CONFIG_AU1X00_USB_DEVICE
+	// 2nd USB port is USB host
+	pin_func |= 0x8000;
+#endif
+	au_writel(pin_func, SYS_PINFUNC);
+#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
+
+	au_writel(0x00000060, 0xb190003c);
+
+#ifdef CONFIG_RTC
+	rtc_ops = &pb1500_rtc_ops;
+	// Enable the RTC if not already enabled
+	if (!(readb(0xac000028) & 0x20)) {
+		writeb(readb(0xac000028) | 0x20, 0xac000028);
+		au_sync();
+	}
+	// Put the clock in BCD mode
+	if (readb(0xac00002C) & 0x4) { /* reg B */
+		writeb(readb(0xac00002c) & ~0x4, 0xac00002c);
+		au_sync();
+	}
+#endif
+}

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)