patch-2.4.22 linux-2.4.22/arch/ia64/sn/io/sn2/shuberror.c
Next file: linux-2.4.22/arch/ia64/sn/io/sn2/shubio.c
Previous file: linux-2.4.22/arch/ia64/sn/io/sn2/shub_intr.c
Back to the patch index
Back to the overall index
- Lines: 474
- Date:
2003-08-25 04:44:39.000000000 -0700
- Orig file:
linux-2.4.21/arch/ia64/sn/io/sn2/shuberror.c
- Orig date:
2003-06-13 07:51:31.000000000 -0700
diff -urN linux-2.4.21/arch/ia64/sn/io/sn2/shuberror.c linux-2.4.22/arch/ia64/sn/io/sn2/shuberror.c
@@ -4,13 +4,14 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1992 - 1997, 2000,2002 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1992 - 1997, 2000,2002-2003 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/irq.h>
+#include <asm/io.h>
#include <asm/irq.h>
#include <asm/smp.h>
#include <asm/sn/sgi.h>
@@ -27,6 +28,7 @@
#include <asm/sn/xtalk/xtalk.h>
#include <asm/sn/pci/pcibr_private.h>
#include <asm/sn/intr.h>
+#include <asm/sn/ioerror_handling.h>
#include <asm/sn/ioerror.h>
#include <asm/sn/sn2/shubio.h>
#include <asm/sn/bte.h>
@@ -34,21 +36,18 @@
extern void hubni_eint_init(cnodeid_t cnode);
extern void hubii_eint_init(cnodeid_t cnode);
extern void hubii_eint_handler (int irq, void *arg, struct pt_regs *ep);
-int hubiio_crb_error_handler(devfs_handle_t hub_v, hubinfo_t hinfo);
-int hubiio_prb_error_handler(devfs_handle_t hub_v, hubinfo_t hinfo);
-extern void bte_crb_error_handler(devfs_handle_t hub_v, int btenum, int crbnum, ioerror_t *ioe, int bteop);
+int hubiio_crb_error_handler(vertex_hdl_t hub_v, hubinfo_t hinfo);
+int hubiio_prb_error_handler(vertex_hdl_t hub_v, hubinfo_t hinfo);
+extern void bte_crb_error_handler(vertex_hdl_t hub_v, int btenum, int crbnum, ioerror_t *ioe, int bteop);
+void print_crb_fields(int crb_num, ii_icrb0_a_u_t icrba,
+ ii_icrb0_b_u_t icrbb, ii_icrb0_c_u_t icrbc,
+ ii_icrb0_d_u_t icrbd, ii_icrb0_e_u_t icrbe);
extern int maxcpus;
+extern error_return_code_t error_state_set(vertex_hdl_t v,error_state_t new_state);
#define HUB_ERROR_PERIOD (120 * HZ) /* 2 minutes */
-#ifdef BUS_INT_WAR
-void sn_add_polled_interrupt(int irq, int interval);
-void sn_delete_polled_interrupt(int irq);
-extern int bus_int_war_ide_irq;
-#endif
-
-
void
hub_error_clear(nasid_t nasid)
{
@@ -74,9 +73,7 @@
REMOTE_HUB_S(nasid, IIO_IOPRB_0 + (i * sizeof(hubreg_t)), prb.iprb_regval);
}
- REMOTE_HUB_S(nasid, IIO_IO_ERR_CLR, -1);
- idsr = REMOTE_HUB_L(nasid, IIO_IIDSR);
- REMOTE_HUB_S(nasid, IIO_IIDSR, (idsr & ~(IIO_IIDSR_SENT_MASK)));
+ REMOTE_HUB_S(nasid, IIO_IECLR, -1);
}
@@ -117,7 +114,6 @@
* Returns : None.
*/
-
void
hubii_eint_init(cnodeid_t cnode)
{
@@ -125,33 +121,41 @@
ii_iidsr_u_t hubio_eint;
hubinfo_t hinfo;
cpuid_t intr_cpu;
- devfs_handle_t hub_v;
+ vertex_hdl_t hub_v;
int bit_pos_to_irq(int bit);
+ ii_ilcsr_u_t ilcsr;
- hub_v = (devfs_handle_t)cnodeid_to_vertex(cnode);
+ hub_v = (vertex_hdl_t)cnodeid_to_vertex(cnode);
ASSERT_ALWAYS(hub_v);
hubinfo_get(hub_v, &hinfo);
ASSERT(hinfo);
ASSERT(hinfo->h_cnodeid == cnode);
+ ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);
+ if ((ilcsr.ii_ilcsr_fld_s.i_llp_stat & 0x2) == 0) {
+ /*
+ * HUB II link is not up. Disable LLP. Clear old errors.
+ * Enable interrupts to handle BTE errors.
+ */
+ ilcsr.ii_ilcsr_fld_s.i_llp_en = 0;
+ REMOTE_HUB_S(hinfo->h_nasid, IIO_ILCSR, ilcsr.ii_ilcsr_regval);
+ }
+
/* Select a possible interrupt target where there is a free interrupt
* bit and also reserve the interrupt bit for this IO error interrupt
*/
- intr_cpu = intr_heuristic(hub_v,0,-1,0,hub_v,
+ intr_cpu = intr_heuristic(hub_v,0,SGI_II_ERROR,0,hub_v,
"HUB IO error interrupt",&bit);
if (intr_cpu == CPU_NONE) {
printk("hubii_eint_init: intr_reserve_level failed, cnode %d", cnode);
return;
}
- rv = intr_connect_level(intr_cpu, bit, 0, NULL);
- request_irq(bit + (intr_cpu << 8), hubii_eint_handler, 0, "SN_hub_error", (void *)hub_v);
- irq_desc(bit + (intr_cpu << 8))->status |= SN2_IRQ_PER_HUB;
-#ifdef BUS_INT_WAR
- sn_add_polled_interrupt(bit + (intr_cpu << 8), (0.01 * HZ));
-#endif
+ rv = intr_connect_level(intr_cpu, SGI_II_ERROR, 0, NULL);
+ request_irq(SGI_II_ERROR, hubii_eint_handler, SA_SHIRQ, "SN_hub_error", (void *)hub_v);
+ irq_desc(bit)->status |= SN2_IRQ_PER_HUB;
ASSERT_ALWAYS(rv >= 0);
hubio_eint.ii_iidsr_regval = 0;
hubio_eint.ii_iidsr_fld_s.i_enable = 1;
@@ -167,18 +171,29 @@
void
hubii_eint_handler (int irq, void *arg, struct pt_regs *ep)
{
- devfs_handle_t hub_v;
+ vertex_hdl_t hub_v;
hubinfo_t hinfo;
ii_wstat_u_t wstat;
hubreg_t idsr;
+ ii_ilcsr_u_t ilcsr;
/* two levels of casting avoids compiler warning.!! */
- hub_v = (devfs_handle_t)(long)(arg);
+ hub_v = (vertex_hdl_t)(long)(arg);
ASSERT(hub_v);
hubinfo_get(hub_v, &hinfo);
+ idsr = REMOTE_HUB_L(hinfo->h_nasid, IIO_ICMR);
+#if 0
+ if (idsr & 0x1) {
+ /* ICMR bit is set .. we are getting into "Spurious Interrupts condition. */
+ printk("Cnode %d II has seen the ICMR condition\n", hinfo->h_cnodeid);
+ printk("***** Please file PV with the above messages *****\n");
+ /* panic("We have to panic to prevent further unknown states ..\n"); */
+ }
+#endif
+
/*
* Identify the reason for error.
*/
@@ -218,10 +233,26 @@
* Note: we may never be able to print this, if the II talking
* to Xbow which hosts the console is dead.
*/
- printk("Hub %d to Xtalk Link failed (II_ECRAZY) Reason: %s",
- hinfo->h_cnodeid, reason);
+ ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);
+ if (ilcsr.ii_ilcsr_fld_s.i_llp_en == 1) { /* Link is enabled */
+ printk("Hub %d, cnode %d to Xtalk Link failed (II_ECRAZY) Reason: %s",
+ hinfo->h_nasid, hinfo->h_cnodeid, reason);
+ }
}
+
+ /*
+ * Before processing any interrupt related information, clear all
+ * error indication and reenable interrupts. This will prevent
+ * lost interrupts due to the interrupt handler scanning past a PRB/CRB
+ * which has not errorred yet and then the PRB/CRB goes into error.
+ * Note, PRB errors are cleared individually.
+ */
+ REMOTE_HUB_S(hinfo->h_nasid, IIO_IECLR, 0xff0000);
+ idsr = REMOTE_HUB_L(hinfo->h_nasid, IIO_IIDSR) & ~IIO_IIDSR_SENT_MASK;
+ REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, idsr);
+
+
/*
* It's a toss as to which one among PRB/CRB to check first.
* Current decision is based on the severity of the errors.
@@ -232,14 +263,6 @@
*/
(void)hubiio_crb_error_handler(hub_v, hinfo);
(void)hubiio_prb_error_handler(hub_v, hinfo);
- /*
- * If we reach here, it indicates crb/prb handlers successfully
- * handled the error. So, re-enable II to send more interrupt
- * and return.
- */
- REMOTE_HUB_S(hinfo->h_nasid, IIO_IECLR, 0xffffff);
- idsr = REMOTE_HUB_L(hinfo->h_nasid, IIO_IIDSR) & ~IIO_IIDSR_SENT_MASK;
- REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, idsr);
}
/*
@@ -295,6 +318,105 @@
"Xtalk Error Packet"
};
+void
+print_crb_fields(int crb_num, ii_icrb0_a_u_t icrba,
+ ii_icrb0_b_u_t icrbb, ii_icrb0_c_u_t icrbc,
+ ii_icrb0_d_u_t icrbd, ii_icrb0_e_u_t icrbe)
+{
+ printk("CRB %d regA\n\t"
+ "a_iow 0x%x\n\t"
+ "valid0x%x\n\t"
+ "Address0x%lx\n\t"
+ "a_tnum 0x%x\n\t"
+ "a_sidn 0x%x\n",
+ crb_num,
+ icrba.a_iow,
+ icrba.a_valid,
+ icrba.a_addr,
+ icrba.a_tnum,
+ icrba.a_sidn);
+ printk("CRB %d regB\n\t"
+ "b_imsgtype 0x%x\n\t"
+ "b_imsg 0x%x\n"
+ "\tb_use_old 0x%x\n\t"
+ "b_initiator 0x%x\n\t"
+ "b_exc 0x%x\n"
+ "\tb_ackcnt 0x%x\n\t"
+ "b_resp 0x%x\n\t"
+ "b_ack 0x%x\n"
+ "\tb_hold 0x%x\n\t"
+ "b_wb 0x%x\n\t"
+ "b_intvn 0x%x\n"
+ "\tb_stall_ib 0x%x\n\t"
+ "b_stall_int 0x%x\n"
+ "\tb_stall_bte_0 0x%x\n\t"
+ "b_stall_bte_1 0x%x\n"
+ "\tb_error 0x%x\n\t"
+ "b_lnetuce 0x%x\n\t"
+ "b_mark 0x%x\n\t"
+ "b_xerr 0x%x\n",
+ crb_num,
+ icrbb.b_imsgtype,
+ icrbb.b_imsg,
+ icrbb.b_use_old,
+ icrbb.b_initiator,
+ icrbb.b_exc,
+ icrbb.b_ackcnt,
+ icrbb.b_resp,
+ icrbb.b_ack,
+ icrbb.b_hold,
+ icrbb.b_wb,
+ icrbb.b_intvn,
+ icrbb.b_stall_ib,
+ icrbb.b_stall_int,
+ icrbb.b_stall_bte_0,
+ icrbb.b_stall_bte_1,
+ icrbb.b_error,
+ icrbb.b_lnetuce,
+ icrbb.b_mark,
+ icrbb.b_xerr);
+ printk("CRB %d regC\n\t"
+ "c_source 0x%x\n\t"
+ "c_xtsize 0x%x\n\t"
+ "c_cohtrans 0x%x\n\t"
+ "c_btenum 0x%x\n\t"
+ "c_gbr 0x%x\n\t"
+ "c_doresp 0x%x\n\t"
+ "c_barrop 0x%x\n\t"
+ "c_suppl 0x%x\n",
+ crb_num,
+ icrbc.c_source,
+ icrbc.c_xtsize,
+ icrbc.c_cohtrans,
+ icrbc.c_btenum,
+ icrbc.c_gbr,
+ icrbc.c_doresp,
+ icrbc.c_barrop,
+ icrbc.c_suppl);
+ printk("CRB %d regD\n\t"
+ "d_bteaddr 0x%lx\n\t"
+ "d_bteop 0x%x\n\t"
+ "d_pripsc 0x%x\n\t"
+ "d_pricnt 0x%x\n\t"
+ "d_sleep 0x%x\n\t",
+ crb_num,
+ icrbd.d_bteaddr,
+ icrbd.d_bteop,
+ icrbd.d_pripsc,
+ icrbd.d_pricnt,
+ icrbd.d_sleep);
+ printk("CRB %d regE\n\t"
+ "icrbe_timeout 0x%x\n\t"
+ "icrbe_context 0x%x\n\t"
+ "icrbe_toutvld 0x%x\n\t"
+ "icrbe_ctxtvld 0x%x\n\t",
+ crb_num,
+ icrbe.icrbe_timeout,
+ icrbe.icrbe_context,
+ icrbe.icrbe_toutvld,
+ icrbe.icrbe_ctxtvld);
+}
+
/*
* hubiio_crb_error_handler
*
@@ -317,7 +439,7 @@
*/
int
-hubiio_crb_error_handler(devfs_handle_t hub_v, hubinfo_t hinfo)
+hubiio_crb_error_handler(vertex_hdl_t hub_v, hubinfo_t hinfo)
{
cnodeid_t cnode;
nasid_t nasid;
@@ -335,6 +457,9 @@
cnode = NASID_TO_COMPACT_NODEID(nasid);
/*
+ * XXX - Add locking for any recovery actions
+ */
+ /*
* Scan through all CRBs in the Hub, and handle the errors
* in any of the CRBs marked.
*/
@@ -373,16 +498,11 @@
else /* b_initiator bit 2 gives BTE number */
bte_num = (icrbb.b_initiator & 0x4) >> 2;
- /* >>> bte_crb_error_handler needs to be
- * broken into two parts. The first should
- * cleanup the CRB. The second should wait
- * until all bte related CRB's are complete
- * and then do the error reset.
- */
+ hubiio_crb_free(hinfo, i);
+
bte_crb_error_handler(hub_v, bte_num,
i, &ioerror,
icrbd.d_bteop);
- hubiio_crb_free(hinfo, i);
num_errors++;
continue;
}
@@ -430,6 +550,86 @@
IOERROR_SETVALUE(&ioerror, tnum, icrba.a_tnum);
}
+ if (icrbb.b_error) {
+ /*
+ * CRB 'i' has some error. Identify the type of error,
+ * and try to handle it.
+ *
+ */
+ switch(icrbb.b_ecode) {
+ case IIO_ICRB_ECODE_PERR:
+ case IIO_ICRB_ECODE_WERR:
+ case IIO_ICRB_ECODE_AERR:
+ case IIO_ICRB_ECODE_PWERR:
+ case IIO_ICRB_ECODE_TOUT:
+ case IIO_ICRB_ECODE_XTERR:
+ printk("Shub II CRB %d: error %s on hub cnodeid: %d",
+ i, hubiio_crb_errors[icrbb.b_ecode], cnode);
+ /*
+ * Any sort of write error is mostly due
+ * bad programming (Note it's not a timeout.)
+ * So, invoke hub_iio_error_handler with
+ * appropriate information.
+ */
+ IOERROR_SETVALUE(&ioerror,errortype,icrbb.b_ecode);
+
+ /* Go through the error bit lookup phase */
+ if (error_state_set(hub_v, ERROR_STATE_LOOKUP) ==
+ ERROR_RETURN_CODE_CANNOT_SET_STATE)
+ return(IOERROR_UNHANDLED);
+ rc = hub_ioerror_handler(
+ hub_v,
+ DMA_WRITE_ERROR,
+ MODE_DEVERROR,
+ &ioerror);
+ if (rc == IOERROR_HANDLED) {
+ rc = hub_ioerror_handler(
+ hub_v,
+ DMA_WRITE_ERROR,
+ MODE_DEVREENABLE,
+ &ioerror);
+ }else {
+ printk("Unable to handle %s on hub %d",
+ hubiio_crb_errors[icrbb.b_ecode],
+ cnode);
+ /* panic; */
+ }
+ /* Go to Next error */
+ print_crb_fields(i, icrba, icrbb, icrbc,
+ icrbd, icrbe);
+ hubiio_crb_free(hinfo, i);
+ continue;
+ case IIO_ICRB_ECODE_PRERR:
+ case IIO_ICRB_ECODE_DERR:
+ printk("Shub II CRB %d: error %s on hub : %d",
+ i, hubiio_crb_errors[icrbb.b_ecode], cnode);
+ /* panic */
+ default:
+ printk("Shub II CRB error (code : %d) on hub : %d",
+ icrbb.b_ecode, cnode);
+ /* panic */
+ }
+ }
+ /*
+ * Error is not indicated via the errcode field
+ * Check other error indications in this register.
+ */
+ if (icrbb.b_xerr) {
+ printk("Shub II CRB %d: Xtalk Packet with error bit set to hub %d",
+ i, cnode);
+ /* panic */
+ }
+ if (icrbb.b_lnetuce) {
+ printk("Shub II CRB %d: Uncorrectable data error detected on data "
+ " from NUMAlink to node %d",
+ i, cnode);
+ /* panic */
+ }
+ print_crb_fields(i, icrba, icrbb, icrbc, icrbd, icrbe);
+
+
+
+
if (icrbb.b_error) {
/*
@@ -488,7 +688,7 @@
default:
panic("Fatal error (code : %d) on hub : %d",
- cnode);
+ icrbb.b_ecode, cnode);
/*NOTREACHED*/
}
@@ -568,7 +768,7 @@
* Cleanup involes freeing the PRB register
*/
static void
-hubii_prb_handler(devfs_handle_t hub_v, hubinfo_t hinfo, int wnum)
+hubii_prb_handler(vertex_hdl_t hub_v, hubinfo_t hinfo, int wnum)
{
nasid_t nasid;
@@ -576,13 +776,13 @@
/*
* Clear error bit by writing to IECLR register.
*/
- REMOTE_HUB_S(nasid, IIO_IO_ERR_CLR, (1 << wnum));
+ REMOTE_HUB_S(nasid, IIO_IECLR, (1 << wnum));
/*
* PIO Write to Widget 'i' got into an error.
* Invoke hubiio_error_handler with this information.
*/
- printk( "Hub nasid %d got a PIO Write error from widget %d, cleaning up and continuing",
- nasid, wnum);
+ printk( "Hub nasid %d got a PIO Write error from widget %d, "
+ "cleaning up and continuing", nasid, wnum);
/*
* XXX
* It may be necessary to adjust IO PRB counter
@@ -591,7 +791,7 @@
}
int
-hubiio_prb_error_handler(devfs_handle_t hub_v, hubinfo_t hinfo)
+hubiio_prb_error_handler(vertex_hdl_t hub_v, hubinfo_t hinfo)
{
int wnum;
nasid_t nasid;
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)