patch-2.4.22 linux-2.4.22/arch/ia64/sn/io/sn1/ml_iograph.c
Next file: linux-2.4.22/arch/ia64/sn/io/sn1/module.c
Previous file: linux-2.4.22/arch/ia64/sn/io/sn1/ml_SN_intr.c
Back to the patch index
Back to the overall index
- Lines: 1506
- Date:
1969-12-31 16:00:00.000000000 -0800
- Orig file:
linux-2.4.21/arch/ia64/sn/io/sn1/ml_iograph.c
- Orig date:
2003-06-13 07:51:30.000000000 -0700
diff -urN linux-2.4.21/arch/ia64/sn/io/sn1/ml_iograph.c linux-2.4.22/arch/ia64/sn/io/sn1/ml_iograph.c
@@ -1,1505 +0,0 @@
-/* $Id$
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2002 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/ctype.h>
-#include <asm/sn/sgi.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/iograph.h>
-#include <asm/sn/invent.h>
-#include <asm/sn/hcl.h>
-#include <asm/sn/hcl_util.h>
-#include <asm/sn/labelcl.h>
-#include <asm/sn/xtalk/xbow.h>
-#include <asm/sn/pci/bridge.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/eeprom.h>
-#include <asm/sn/sn_private.h>
-#include <asm/sn/pci/pcibr.h>
-#include <asm/sn/xtalk/xtalk.h>
-#include <asm/sn/xtalk/xswitch.h>
-#include <asm/sn/xtalk/xwidget.h>
-#include <asm/sn/xtalk/xtalk_private.h>
-#include <asm/sn/xtalk/xtalkaddrs.h>
-
-/* #define IOGRAPH_DEBUG */
-#ifdef IOGRAPH_DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* IOGRAPH_DEBUG */
-
-/* #define PROBE_TEST */
-
-/* At most 2 hubs can be connected to an xswitch */
-#define NUM_XSWITCH_VOLUNTEER 2
-
-/*
- * Track which hubs have volunteered to manage devices hanging off of
- * a Crosstalk Switch (e.g. xbow). This structure is allocated,
- * initialized, and hung off the xswitch vertex early on when the
- * xswitch vertex is created.
- */
-typedef struct xswitch_vol_s {
- mutex_t xswitch_volunteer_mutex;
- int xswitch_volunteer_count;
- devfs_handle_t xswitch_volunteer[NUM_XSWITCH_VOLUNTEER];
-} *xswitch_vol_t;
-
-void
-xswitch_vertex_init(devfs_handle_t xswitch)
-{
- xswitch_vol_t xvolinfo;
- int rc;
-
- xvolinfo = kmalloc(sizeof(struct xswitch_vol_s), GFP_KERNEL);
- mutex_init(&xvolinfo->xswitch_volunteer_mutex);
- xvolinfo->xswitch_volunteer_count = 0;
- rc = hwgraph_info_add_LBL(xswitch,
- INFO_LBL_XSWITCH_VOL,
- (arbitrary_info_t)xvolinfo);
- ASSERT(rc == GRAPH_SUCCESS); rc = rc;
-}
-
-
-/*
- * When assignment of hubs to widgets is complete, we no longer need the
- * xswitch volunteer structure hanging around. Destroy it.
- */
-static void
-xswitch_volunteer_delete(devfs_handle_t xswitch)
-{
- xswitch_vol_t xvolinfo;
- int rc;
-
- rc = hwgraph_info_remove_LBL(xswitch,
- INFO_LBL_XSWITCH_VOL,
- (arbitrary_info_t *)&xvolinfo);
- kfree(xvolinfo);
-}
-/*
- * A Crosstalk master volunteers to manage xwidgets on the specified xswitch.
- */
-/* ARGSUSED */
-static void
-volunteer_for_widgets(devfs_handle_t xswitch, devfs_handle_t master)
-{
- xswitch_vol_t xvolinfo = NULL;
- devfs_handle_t hubv;
- hubinfo_t hubinfo;
-
- (void)hwgraph_info_get_LBL(xswitch,
- INFO_LBL_XSWITCH_VOL,
- (arbitrary_info_t *)&xvolinfo);
- if (xvolinfo == NULL) {
- return;
- }
-
- mutex_lock(&xvolinfo->xswitch_volunteer_mutex);
- ASSERT(xvolinfo->xswitch_volunteer_count < NUM_XSWITCH_VOLUNTEER);
- xvolinfo->xswitch_volunteer[xvolinfo->xswitch_volunteer_count] = master;
- xvolinfo->xswitch_volunteer_count++;
-
- /*
- * if dual ported, make the lowest widgetid always be
- * xswitch_volunteer[0].
- */
- if (xvolinfo->xswitch_volunteer_count == NUM_XSWITCH_VOLUNTEER) {
- hubv = xvolinfo->xswitch_volunteer[0];
- hubinfo_get(hubv, &hubinfo);
- if (hubinfo->h_widgetid != XBOW_HUBLINK_LOW) {
- xvolinfo->xswitch_volunteer[0] =
- xvolinfo->xswitch_volunteer[1];
- xvolinfo->xswitch_volunteer[1] = hubv;
- }
- }
- mutex_unlock(&xvolinfo->xswitch_volunteer_mutex);
-}
-
-extern int xbow_port_io_enabled(nasid_t nasid, int widgetnum);
-
-/*
- * Assign all the xwidgets hanging off the specified xswitch to the
- * Crosstalk masters that have volunteered for xswitch duty.
- */
-/* ARGSUSED */
-static void
-assign_widgets_to_volunteers(devfs_handle_t xswitch, devfs_handle_t hubv)
-{
- xswitch_info_t xswitch_info;
- xswitch_vol_t xvolinfo = NULL;
- xwidgetnum_t widgetnum;
- int num_volunteer;
- nasid_t nasid;
- hubinfo_t hubinfo;
- extern int iobrick_type_get_nasid(nasid_t);
-
-
- hubinfo_get(hubv, &hubinfo);
- nasid = hubinfo->h_nasid;
-
- xswitch_info = xswitch_info_get(xswitch);
- ASSERT(xswitch_info != NULL);
-
- (void)hwgraph_info_get_LBL(xswitch,
- INFO_LBL_XSWITCH_VOL,
- (arbitrary_info_t *)&xvolinfo);
- if (xvolinfo == NULL) {
- return;
- }
-
- num_volunteer = xvolinfo->xswitch_volunteer_count;
- ASSERT(num_volunteer > 0);
-
- /* Assign master hub for xswitch itself. */
- if (HUB_WIDGET_ID_MIN > 0) {
- hubv = xvolinfo->xswitch_volunteer[0];
- xswitch_info_master_assignment_set(xswitch_info, (xwidgetnum_t)0, hubv);
- }
-
- /*
- * TBD: Use administrative information to alter assignment of
- * widgets to hubs.
- */
- for (widgetnum=HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX; widgetnum++) {
- int i;
-
- /*
- * Ignore disabled/empty ports.
- */
- if (!xbow_port_io_enabled(nasid, widgetnum))
- continue;
-
- /*
- * If this is the master IO board, assign it to the same
- * hub that owned it in the prom.
- */
- if (is_master_nasid_widget(nasid, widgetnum)) {
- for (i=0; i<num_volunteer; i++) {
- hubv = xvolinfo->xswitch_volunteer[i];
- hubinfo_get(hubv, &hubinfo);
- nasid = hubinfo->h_nasid;
- if (nasid == get_console_nasid())
- goto do_assignment;
- }
- }
-
- /*
- * Assuming that we're dual-hosted and that PCI cards
- * are naturally placed left-to-right, alternate PCI
- * buses across both Cbricks. For Pbricks, and Ibricks,
- * io_brick_map_widget() returns the PCI bus number
- * associated with the given brick type and widget number.
- * For Xbricks, it returns the XIO slot number.
- */
-
- i = 0;
- if (num_volunteer > 1) {
- int bt;
-
- bt = iobrick_type_get_nasid(nasid);
- if (bt >= 0) {
- /*
- * PXBRICK has two busses per widget so this
- * algorithm wouldn't work (all busses would
- * be assigned to one volunteer). Change the
- * bricktype to PBRICK whose mapping is setup
- * suchthat 2 of the PICs will be assigned to
- * one volunteer and the other one will be
- * assigned to the other volunteer.
- */
- if (bt == MODULE_PXBRICK)
- bt = MODULE_PBRICK;
-
- i = io_brick_map_widget(bt, widgetnum) & 1;
- }
- }
-
- hubv = xvolinfo->xswitch_volunteer[i];
-
-do_assignment:
- /*
- * At this point, we want to make hubv the master of widgetnum.
- */
- xswitch_info_master_assignment_set(xswitch_info, widgetnum, hubv);
- }
-
- xswitch_volunteer_delete(xswitch);
-}
-
-/*
- * Early iograph initialization. Called by master CPU in mlreset().
- * Useful for including iograph.o in kernel.o.
- */
-void
-iograph_early_init(void)
-{
-/*
- * Need new way to get this information ..
- */
- cnodeid_t cnode;
- nasid_t nasid;
- lboard_t *board;
-
- /*
- * Init. the board-to-hwgraph link early, so FRU analyzer
- * doesn't trip on leftover values if we panic early on.
- */
- for(cnode = 0; cnode < numnodes; cnode++) {
- nasid = COMPACT_TO_NASID_NODEID(cnode);
- board = (lboard_t *)KL_CONFIG_INFO(nasid);
- DBG("iograph_early_init: Found board 0x%p\n", board);
-
- /* Check out all the board info stored on a node */
- while(board) {
- board->brd_graph_link = GRAPH_VERTEX_NONE;
- board = KLCF_NEXT(board);
- DBG("iograph_early_init: Found board 0x%p\n", board);
- }
- }
-
- hubio_init();
-}
-
-/*
- * Let boot processor know that we're done initializing our node's IO
- * and then exit.
- */
-/* ARGSUSED */
-static void
-io_init_done(cnodeid_t cnodeid,cpu_cookie_t c)
-{
- /* Let boot processor know that we're done. */
-}
-
-/*
- * Probe to see if this hub's xtalk link is active. If so,
- * return the Crosstalk Identification of the widget that we talk to.
- * This is called before any of the Crosstalk infrastructure for
- * this hub is set up. It's usually called on the node that we're
- * probing, but not always.
- *
- * TBD: Prom code should actually do this work, and pass through
- * hwid for our use.
- */
-static void
-early_probe_for_widget(devfs_handle_t hubv, xwidget_hwid_t hwid)
-{
- hubreg_t llp_csr_reg;
- nasid_t nasid;
- hubinfo_t hubinfo;
-
- hubinfo_get(hubv, &hubinfo);
- nasid = hubinfo->h_nasid;
-
- llp_csr_reg = REMOTE_HUB_L(nasid, IIO_LLP_CSR);
- /*
- * If link is up, read the widget's part number.
- * A direct connect widget must respond to widgetnum=0.
- */
- if (llp_csr_reg & IIO_LLP_CSR_IS_UP) {
- /* TBD: Put hub into "indirect" mode */
- /*
- * We're able to read from a widget because our hub's
- * WIDGET_ID was set up earlier.
- */
- widgetreg_t widget_id = *(volatile widgetreg_t *)
- (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
-
- DBG("early_probe_for_widget: Hub Vertex 0x%p is UP widget_id = 0x%x Register 0x%p\n", hubv, widget_id,
- (volatile widgetreg_t *)(RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID) );
-
- hwid->part_num = XWIDGET_PART_NUM(widget_id);
- hwid->rev_num = XWIDGET_REV_NUM(widget_id);
- hwid->mfg_num = XWIDGET_MFG_NUM(widget_id);
-
- /* TBD: link reset */
- } else {
-
- hwid->part_num = XWIDGET_PART_NUM_NONE;
- hwid->rev_num = XWIDGET_REV_NUM_NONE;
- hwid->mfg_num = XWIDGET_MFG_NUM_NONE;
- }
-}
-
-/* Add inventory information to the widget vertex
- * Right now (module,slot,revision) is being
- * added as inventory information.
- */
-static void
-xwidget_inventory_add(devfs_handle_t widgetv,
- lboard_t *board,
- struct xwidget_hwid_s hwid)
-{
- if (!board)
- return;
- /* Donot add inventory information for the baseio
- * on a speedo with an xbox. It has already been
- * taken care of in SN00_vmc.
- * Speedo with xbox's baseio comes in at slot io1 (widget 9)
- */
- device_inventory_add(widgetv,INV_IOBD,board->brd_type,
- board->brd_module,
- SLOTNUM_GETSLOT(board->brd_slot),
- hwid.rev_num);
-}
-
-/*
- * io_xswitch_widget_init
- *
- */
-
-void
-io_xswitch_widget_init(devfs_handle_t xswitchv,
- devfs_handle_t hubv,
- xwidgetnum_t widgetnum,
- async_attach_t aa)
-{
- xswitch_info_t xswitch_info;
- xwidgetnum_t hub_widgetid;
- devfs_handle_t widgetv;
- cnodeid_t cnode;
- widgetreg_t widget_id;
- nasid_t nasid, peer_nasid;
- struct xwidget_hwid_s hwid;
- hubinfo_t hubinfo;
- /*REFERENCED*/
- int rc;
- char pathname[128];
- char new_name[64];
- moduleid_t module;
- slotid_t slot;
- lboard_t *board = NULL;
- char buffer[16];
- slotid_t get_widget_slotnum(int xbow, int widget);
-
- DBG("\nio_xswitch_widget_init: hubv 0x%p, xswitchv 0x%p, widgetnum 0x%x\n", hubv, xswitchv, widgetnum);
-
- /*
- * Verify that xswitchv is indeed an attached xswitch.
- */
- xswitch_info = xswitch_info_get(xswitchv);
- ASSERT(xswitch_info != NULL);
-
- hubinfo_get(hubv, &hubinfo);
- nasid = hubinfo->h_nasid;
- cnode = NASID_TO_COMPACT_NODEID(nasid);
- hub_widgetid = hubinfo->h_widgetid;
-
- /*
- * Check that the widget is an io widget and is enabled
- * on this nasid or the `peer' nasid. The peer nasid
- * is the other hub/bedrock connected to the xbow.
- */
- peer_nasid = NODEPDA(cnode)->xbow_peer;
- if (peer_nasid == INVALID_NASID)
- /* If I don't have a peer, use myself. */
- peer_nasid = nasid;
- if (!xbow_port_io_enabled(nasid, widgetnum) &&
- !xbow_port_io_enabled(peer_nasid, widgetnum)) {
- return;
- }
-
- if (xswitch_info_link_ok(xswitch_info, widgetnum)) {
- char name[4];
-
- /*
- * If the current hub is not supposed to be the master
- * for this widgetnum, then skip this widget.
- */
- if (xswitch_info_master_assignment_get(xswitch_info,
- widgetnum) != hubv) {
- return;
- }
-
- module = NODEPDA(cnode)->module_id;
-#ifdef XBRIDGE_REGS_SIM
- /* hardwire for now...could do this with something like:
- * xbow_soft_t soft = hwgraph_fastinfo_get(vhdl);
- * xbow_t xbow = soft->base;
- * xbowreg_t xwidget_id = xbow->xb_wid_id;
- * but I don't feel like figuring out vhdl right now..
- * and I know for a fact the answer is 0x2d000049
- */
- DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: reading xwidget id: hardwired to xbridge (0x2d000049).\n");
- DBG("XWIDGET_PART_NUM(0x2d000049)= 0x%x\n", XWIDGET_PART_NUM(0x2d000049));
- if (XWIDGET_PART_NUM(0x2d000049)==XXBOW_WIDGET_PART_NUM)
-#else
- if (nasid_has_xbridge(nasid))
-#endif /* XBRIDGE_REGS_SIM */
- {
- board = find_lboard_module_class(
- (lboard_t *)KL_CONFIG_INFO(nasid),
- module,
- KLTYPE_IOBRICK);
-
-DBG("io_xswitch_widget_init: Board 0x%p\n", board);
-{
- lboard_t dummy;
-
-
- if (board) {
- DBG("io_xswitch_widget_init: Found KLTYPE_IOBRICK Board 0x%p brd_type 0x%x\n", board, board->brd_type);
- } else {
- DBG("io_xswitch_widget_init: FIXME did not find IOBOARD\n");
- board = &dummy;
- }
-
-}
-
- /*
- * Make sure we really want to say xbrick, pbrick,
- * etc. rather than XIO, graphics, etc.
- */
-
-#ifdef SUPPORT_PRINTING_M_FORMAT
- sprintf(pathname, EDGE_LBL_MODULE "/%M/"
- "%cbrick" "/%s/%d",
- NODEPDA(cnode)->module_id,
-
-#else
- memset(buffer, 0, 16);
- format_module_id(buffer, NODEPDA(cnode)->module_id, MODULE_FORMAT_BRIEF);
- sprintf(pathname, EDGE_LBL_MODULE "/%s/"
- "%cbrick" "/%s/%d",
- buffer,
-#endif
-
- (board->brd_type == KLTYPE_IBRICK) ? 'I' :
- (board->brd_type == KLTYPE_PBRICK) ? 'P' :
- (board->brd_type == KLTYPE_XBRICK) ? 'X' : '?',
- EDGE_LBL_XTALK, widgetnum);
- }
-
- DBG("io_xswitch_widget_init: path= %s\n", pathname);
- rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv);
-
- ASSERT(rc == GRAPH_SUCCESS);
-
- /* This is needed to let the user programs to map the
- * module,slot numbers to the corresponding widget numbers
- * on the crossbow.
- */
- rc = device_master_set(hwgraph_connectpt_get(widgetv), hubv);
-
- /* If we are looking at the global master io6
- * then add information about the version of
- * the io6prom as a part of "detailed inventory"
- * information.
- */
- if (is_master_baseio(nasid,
- NODEPDA(cnode)->module_id,
- get_widget_slotnum(0,widgetnum))) {
- extern void klhwg_baseio_inventory_add(devfs_handle_t,
- cnodeid_t);
- module = NODEPDA(cnode)->module_id;
-
-#ifdef XBRIDGE_REGS_SIM
- DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: reading xwidget id: hardwired to xbridge (0x2d000049).\n");
- if (XWIDGET_PART_NUM(0x2d000049)==XXBOW_WIDGET_PART_NUM)
-#else
- if (nasid_has_xbridge(nasid))
-#endif /* XBRIDGE_REGS_SIM */
- {
- board = find_lboard_module(
- (lboard_t *)KL_CONFIG_INFO(nasid),
- module);
- /*
- * Change iobrick to correct i/o brick
- */
-#ifdef SUPPORT_PRINTING_M_FORMAT
- sprintf(pathname, EDGE_LBL_MODULE "/%M/"
-#else
- sprintf(pathname, EDGE_LBL_MODULE "/%x/"
-#endif
- "iobrick" "/%s/%d",
- NODEPDA(cnode)->module_id,
- EDGE_LBL_XTALK, widgetnum);
- } else {
- slot = get_widget_slotnum(0, widgetnum);
- board = get_board_name(nasid, module, slot,
- new_name);
- /*
- * Create the vertex for the widget,
- * using the decimal
- * widgetnum as the name of the primary edge.
- */
-#ifdef SUPPORT_PRINTING_M_FORMAT
- sprintf(pathname, EDGE_LBL_MODULE "/%M/"
- EDGE_LBL_SLOT "/%s",
- NODEPDA(cnode)->module_id,
- new_name);
-#else
- memset(buffer, 0, 16);
- format_module_id(buffer, NODEPDA(cnode)->module_id, MODULE_FORMAT_BRIEF);
- sprintf(pathname, EDGE_LBL_MODULE "/%s/"
- EDGE_LBL_SLOT "/%s",
- buffer,
- new_name);
-#endif
- }
-
- rc = hwgraph_path_add(hwgraph_root, pathname, &widgetv);
- DBG("io_xswitch_widget_init: (2) path= %s\n", pathname);
- /*
- * This is a weird ass code needed for error injection
- * purposes.
- */
- rc = device_master_set(hwgraph_connectpt_get(widgetv), hubv);
-
- klhwg_baseio_inventory_add(widgetv,cnode);
- }
- sprintf(name, "%d", widgetnum);
- DBG("io_xswitch_widget_init: FIXME hwgraph_edge_add %s xswitchv 0x%p, widgetv 0x%p\n", name, xswitchv, widgetv);
- rc = hwgraph_edge_add(xswitchv, widgetv, name);
-
- /*
- * crosstalk switch code tracks which
- * widget is attached to each link.
- */
- xswitch_info_vhdl_set(xswitch_info, widgetnum, widgetv);
-
- /*
- * Peek at the widget to get its crosstalk part and
- * mfgr numbers, then present it to the generic xtalk
- * bus provider to have its driver attach routine
- * called (or not).
- */
-#ifdef XBRIDGE_REGS_SIM
- widget_id = 0x2d000049;
- DBG("io_xswitch_widget_init: XBRIDGE_REGS_SIM FIXME: id hardwired to widget_id\n");
-#else
- widget_id = XWIDGET_ID_READ(nasid, widgetnum);
-#endif /* XBRIDGE_REGS_SIM */
- hwid.part_num = XWIDGET_PART_NUM(widget_id);
- hwid.rev_num = XWIDGET_REV_NUM(widget_id);
- hwid.mfg_num = XWIDGET_MFG_NUM(widget_id);
- /* Store some inventory information about
- * the xwidget in the hardware graph.
- */
- xwidget_inventory_add(widgetv,board,hwid);
-
- (void)xwidget_register(&hwid, widgetv, widgetnum,
- hubv, hub_widgetid,
- aa);
-
-#ifdef SN0_USE_BTE
- bte_bpush_war(cnode, (void *)board);
-#endif
- }
-}
-
-
-static void
-io_init_xswitch_widgets(devfs_handle_t xswitchv, cnodeid_t cnode)
-{
- xwidgetnum_t widgetnum;
- async_attach_t aa;
-
- aa = async_attach_new();
-
- DBG("io_init_xswitch_widgets: xswitchv 0x%p for cnode %d\n", xswitchv, cnode);
-
- for (widgetnum = HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX;
- widgetnum++) {
- io_xswitch_widget_init(xswitchv,
- cnodeid_to_vertex(cnode),
- widgetnum, aa);
- }
- /*
- * Wait for parallel attach threads, if any, to complete.
- */
- async_attach_waitall(aa);
- async_attach_free(aa);
-}
-
-/*
- * For each PCI bridge connected to the xswitch, add a link from the
- * board's klconfig info to the bridge's hwgraph vertex. This lets
- * the FRU analyzer find the bridge without traversing the hardware
- * graph and risking hangs.
- */
-static void
-io_link_xswitch_widgets(devfs_handle_t xswitchv, cnodeid_t cnodeid)
-{
- xwidgetnum_t widgetnum;
- char pathname[128];
- devfs_handle_t vhdl;
- nasid_t nasid, peer_nasid;
- lboard_t *board;
-
-
-
- /* And its connected hub's nasids */
- nasid = COMPACT_TO_NASID_NODEID(cnodeid);
- peer_nasid = NODEPDA(cnodeid)->xbow_peer;
-
- /*
- * Look for paths matching "<widgetnum>/pci" under xswitchv.
- * For every widget, init. its lboard's hwgraph link. If the
- * board has a PCI bridge, point the link to it.
- */
- for (widgetnum = HUB_WIDGET_ID_MIN; widgetnum <= HUB_WIDGET_ID_MAX;
- widgetnum++) {
- sprintf(pathname, "%d", widgetnum);
- if (hwgraph_traverse(xswitchv, pathname, &vhdl) !=
- GRAPH_SUCCESS)
- continue;
-
- board = find_lboard_module((lboard_t *)KL_CONFIG_INFO(nasid),
- NODEPDA(cnodeid)->module_id);
- if (board == NULL && peer_nasid != INVALID_NASID) {
- /*
- * Try to find the board on our peer
- */
- board = find_lboard_module(
- (lboard_t *)KL_CONFIG_INFO(peer_nasid),
- NODEPDA(cnodeid)->module_id);
- }
- if (board == NULL) {
-#if defined(SUPPORT_PRINTING_V_FORMAT)
- printk(KERN_WARNING "Could not find PROM info for vertex %v, "
- "FRU analyzer may fail",
- vhdl);
-#else
- printk(KERN_WARNING "Could not find PROM info for vertex 0x%p, "
- "FRU analyzer may fail",
- (void *)vhdl);
-#endif
- return;
- }
-
- sprintf(pathname, "%d/"EDGE_LBL_PCI, widgetnum);
- if (hwgraph_traverse(xswitchv, pathname, &vhdl) ==
- GRAPH_SUCCESS)
- board->brd_graph_link = vhdl;
- else
- board->brd_graph_link = GRAPH_VERTEX_NONE;
- }
-}
-
-/*
- * Initialize all I/O on the specified node.
- */
-static void
-io_init_node(cnodeid_t cnodeid)
-{
- /*REFERENCED*/
- devfs_handle_t hubv, switchv, widgetv;
- struct xwidget_hwid_s hwid;
- hubinfo_t hubinfo;
- int is_xswitch;
- nodepda_t *npdap;
- struct semaphore *peer_sema = 0;
- uint32_t widget_partnum;
- nodepda_router_info_t *npda_rip;
- cpu_cookie_t c = 0;
- extern int hubdev_docallouts(devfs_handle_t);
-
-#ifdef LATER
- /* Try to execute on the node that we're initializing. */
- c = setnoderun(cnodeid);
-#endif
- npdap = NODEPDA(cnodeid);
-
- /*
- * Get the "top" vertex for this node's hardware
- * graph; it will carry the per-hub hub-specific
- * data, and act as the crosstalk provider master.
- * It's canonical path is probably something of the
- * form /hw/module/%M/slot/%d/node
- */
- hubv = cnodeid_to_vertex(cnodeid);
- DBG("io_init_node: Initialize IO for cnode %d hubv(node) 0x%p npdap 0x%p\n", cnodeid, hubv, npdap);
-
- ASSERT(hubv != GRAPH_VERTEX_NONE);
-
- hubdev_docallouts(hubv);
-
- /*
- * Set up the dependent routers if we have any.
- */
- npda_rip = npdap->npda_rip_first;
-
- while(npda_rip) {
- /* If the router info has not been initialized
- * then we need to do the router initialization
- */
- if (!npda_rip->router_infop) {
- router_init(cnodeid,0,npda_rip);
- }
- npda_rip = npda_rip->router_next;
- }
-
- /*
- * Read mfg info on this hub
- */
-
- /*
- * If nothing connected to this hub's xtalk port, we're done.
- */
- early_probe_for_widget(hubv, &hwid);
- if (hwid.part_num == XWIDGET_PART_NUM_NONE) {
-#ifdef PROBE_TEST
- if ((cnodeid == 1) || (cnodeid == 2)) {
- int index;
-
- for (index = 0; index < 600; index++)
- DBG("Interfering with device probing!!!\n");
- }
-#endif
- /* io_init_done takes cpu cookie as 2nd argument
- * to do a restorenoderun for the setnoderun done
- * at the start of this thread
- */
-
- DBG("**** io_init_node: Node's 0x%p hub widget has XWIDGET_PART_NUM_NONE ****\n", hubv);
- return;
- /* NOTREACHED */
- }
-
- /*
- * attach our hub_provider information to hubv,
- * so we can use it as a crosstalk provider "master"
- * vertex.
- */
- xtalk_provider_register(hubv, &hub_provider);
- xtalk_provider_startup(hubv);
-
- /*
- * Create a vertex to represent the crosstalk bus
- * attached to this hub, and a vertex to be used
- * as the connect point for whatever is out there
- * on the other side of our crosstalk connection.
- *
- * Crosstalk Switch drivers "climb up" from their
- * connection point to try and take over the switch
- * point.
- *
- * Of course, the edges and verticies may already
- * exist, in which case our net effect is just to
- * associate the "xtalk_" driver with the connection
- * point for the device.
- */
-
- (void)hwgraph_path_add(hubv, EDGE_LBL_XTALK, &switchv);
-
- DBG("io_init_node: Created 'xtalk' entry to '../node/' xtalk vertex 0x%p\n", switchv);
-
- ASSERT(switchv != GRAPH_VERTEX_NONE);
-
- (void)hwgraph_edge_add(hubv, switchv, EDGE_LBL_IO);
-
- DBG("io_init_node: Created symlink 'io' from ../node/io to ../node/xtalk \n");
-
- /*
- * We need to find the widget id and update the basew_id field
- * accordingly. In particular, SN00 has direct connected bridge,
- * and hence widget id is Not 0.
- */
-
- widget_partnum = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + WIDGET_ID))) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT;
-
- if (widget_partnum == BRIDGE_WIDGET_PART_NUM ||
- widget_partnum == XBRIDGE_WIDGET_PART_NUM){
- npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID);
-
- DBG("io_init_node: Found XBRIDGE widget_partnum= 0x%x\n", widget_partnum);
-
- } else if ((widget_partnum == XBOW_WIDGET_PART_NUM) ||
- (widget_partnum == XXBOW_WIDGET_PART_NUM) ||
- (widget_partnum == PXBOW_WIDGET_PART_NUM) ) {
- /*
- * Xbow control register does not have the widget ID field.
- * So, hard code the widget ID to be zero.
- */
- DBG("io_init_node: Found XBOW widget_partnum= 0x%x\n", widget_partnum);
- npdap->basew_id = 0;
-
- } else {
- npdap->basew_id = (((*(volatile int32_t *)(NODE_SWIN_BASE(COMPACT_TO_NASID_NODEID(cnodeid), 0) + BRIDGE_WID_CONTROL))) & WIDGET_WIDGET_ID);
-
- panic(" ****io_init_node: Unknown Widget Part Number 0x%x Widget ID 0x%x attached to Hubv 0x%p ****\n", widget_partnum, npdap->basew_id, (void *)hubv);
-
- /*NOTREACHED*/
- }
- {
- char widname[10];
- sprintf(widname, "%x", npdap->basew_id);
- (void)hwgraph_path_add(switchv, widname, &widgetv);
- DBG("io_init_node: Created '%s' to '..node/xtalk/' vertex 0x%p\n", widname, widgetv);
- ASSERT(widgetv != GRAPH_VERTEX_NONE);
- }
-
- nodepda->basew_xc = widgetv;
-
- is_xswitch = xwidget_hwid_is_xswitch(&hwid);
-
- /*
- * Try to become the master of the widget. If this is an xswitch
- * with multiple hubs connected, only one will succeed. Mastership
- * of an xswitch is used only when touching registers on that xswitch.
- * The slave xwidgets connected to the xswitch can be owned by various
- * masters.
- */
- if (device_master_set(widgetv, hubv) == 0) {
-
- /* Only one hub (thread) per Crosstalk device or switch makes
- * it to here.
- */
-
- /*
- * Initialize whatever xwidget is hanging off our hub.
- * Whatever it is, it's accessible through widgetnum 0.
- */
- hubinfo_get(hubv, &hubinfo);
-
- (void)xwidget_register(&hwid, widgetv, npdap->basew_id, hubv, hubinfo->h_widgetid, NULL);
-
- if (!is_xswitch) {
- /* io_init_done takes cpu cookie as 2nd argument
- * to do a restorenoderun for the setnoderun done
- * at the start of this thread
- */
- io_init_done(cnodeid,c);
- /* NOTREACHED */
- }
-
- /*
- * Special handling for Crosstalk Switches (e.g. xbow).
- * We need to do things in roughly the following order:
- * 1) Initialize xswitch hardware (done above)
- * 2) Determine which hubs are available to be widget masters
- * 3) Discover which links are active from the xswitch
- * 4) Assign xwidgets hanging off the xswitch to hubs
- * 5) Initialize all xwidgets on the xswitch
- */
-
- volunteer_for_widgets(switchv, hubv);
-
- /* If there's someone else on this crossbow, recognize him */
- if (npdap->xbow_peer != INVALID_NASID) {
- nodepda_t *peer_npdap = NODEPDA(NASID_TO_COMPACT_NODEID(npdap->xbow_peer));
- peer_sema = &peer_npdap->xbow_sema;
- volunteer_for_widgets(switchv, peer_npdap->node_vertex);
- }
-
- assign_widgets_to_volunteers(switchv, hubv);
-
- /* Signal that we're done */
- if (peer_sema) {
- mutex_unlock(peer_sema);
- }
-
- }
- else {
- /* Wait 'til master is done assigning widgets. */
- mutex_lock(&npdap->xbow_sema);
- }
-
-#ifdef PROBE_TEST
- if ((cnodeid == 1) || (cnodeid == 2)) {
- int index;
-
- for (index = 0; index < 500; index++)
- DBG("Interfering with device probing!!!\n");
- }
-#endif
- /* Now both nodes can safely inititialize widgets */
- io_init_xswitch_widgets(switchv, cnodeid);
- io_link_xswitch_widgets(switchv, cnodeid);
-
- /* io_init_done takes cpu cookie as 2nd argument
- * to do a restorenoderun for the setnoderun done
- * at the start of this thread
- */
- io_init_done(cnodeid,c);
-
- DBG("\nio_init_node: DONE INITIALIZED ALL I/O FOR CNODEID %d\n\n", cnodeid);
-}
-
-
-#define IOINIT_STKSZ (16 * 1024)
-
-#define __DEVSTR1 "/../.master/"
-#define __DEVSTR2 "/target/"
-#define __DEVSTR3 "/lun/0/disk/partition/"
-#define __DEVSTR4 "/../ef"
-
-/*
- * Currently, we need to allow for 5 IBrick slots with 1 FC each
- * plus an internal 1394.
- *
- * ioconfig starts numbering SCSI's at NUM_BASE_IO_SCSI_CTLR.
- */
-#define NUM_BASE_IO_SCSI_CTLR 6
-
-/*
- * This tells ioconfig where it can start numbering scsi controllers.
- * Below this base number, platform-specific handles the numbering.
- * XXX Irix legacy..controller numbering should be part of devfsd's job
- */
-int num_base_io_scsi_ctlr = 2; /* used by syssgi */
-devfs_handle_t base_io_scsi_ctlr_vhdl[NUM_BASE_IO_SCSI_CTLR];
-static devfs_handle_t baseio_enet_vhdl,baseio_console_vhdl;
-
-/*
- * Put the logical controller number information in the
- * scsi controller vertices for each scsi controller that
- * is in a "fixed position".
- */
-static void
-scsi_ctlr_nums_add(devfs_handle_t pci_vhdl)
-{
- {
- int i;
-
- num_base_io_scsi_ctlr = NUM_BASE_IO_SCSI_CTLR;
-
- /* Initialize base_io_scsi_ctlr_vhdl array */
- for (i=0; i<num_base_io_scsi_ctlr; i++)
- base_io_scsi_ctlr_vhdl[i] = GRAPH_VERTEX_NONE;
- }
- {
- /*
- * May want to consider changing the SN0 code, above, to work more like
- * the way this works.
- */
- devfs_handle_t base_ibrick_xbridge_vhdl;
- devfs_handle_t base_ibrick_xtalk_widget_vhdl;
- devfs_handle_t scsi_ctlr_vhdl;
- int i;
- graph_error_t rv;
-
- /*
- * This is a table of "well-known" SCSI controllers and their well-known
- * controller numbers. The names in the table start from the base IBrick's
- * Xbridge vertex, so the first component is the xtalk widget number.
- */
- static struct {
- char *base_ibrick_scsi_path;
- int controller_number;
- } hardwired_scsi_controllers[] = {
- {"15/" EDGE_LBL_PCI "/1/" EDGE_LBL_SCSI_CTLR "/0", 0},
- {"15/" EDGE_LBL_PCI "/2/" EDGE_LBL_SCSI_CTLR "/0", 1},
- {"15/" EDGE_LBL_PCI "/3/" EDGE_LBL_SCSI_CTLR "/0", 2},
- {"14/" EDGE_LBL_PCI "/1/" EDGE_LBL_SCSI_CTLR "/0", 3},
- {"14/" EDGE_LBL_PCI "/2/" EDGE_LBL_SCSI_CTLR "/0", 4},
- {"15/" EDGE_LBL_PCI "/6/ohci/0/" EDGE_LBL_SCSI_CTLR "/0", 5},
- {NULL, -1} /* must be last */
- };
-
- base_ibrick_xtalk_widget_vhdl = hwgraph_connectpt_get(pci_vhdl);
- ASSERT_ALWAYS(base_ibrick_xtalk_widget_vhdl != GRAPH_VERTEX_NONE);
-
- base_ibrick_xbridge_vhdl = hwgraph_connectpt_get(base_ibrick_xtalk_widget_vhdl);
- ASSERT_ALWAYS(base_ibrick_xbridge_vhdl != GRAPH_VERTEX_NONE);
- hwgraph_vertex_unref(base_ibrick_xtalk_widget_vhdl);
-
- /*
- * Iterate through the list of well-known SCSI controllers.
- * For each controller found, set it's controller number according
- * to the table.
- */
- for (i=0; hardwired_scsi_controllers[i].base_ibrick_scsi_path != NULL; i++) {
- rv = hwgraph_path_lookup(base_ibrick_xbridge_vhdl,
- hardwired_scsi_controllers[i].base_ibrick_scsi_path, &scsi_ctlr_vhdl, NULL);
-
- if (rv != GRAPH_SUCCESS) /* No SCSI at this path */
- continue;
-
- ASSERT(hardwired_scsi_controllers[i].controller_number < NUM_BASE_IO_SCSI_CTLR);
- base_io_scsi_ctlr_vhdl[hardwired_scsi_controllers[i].controller_number] = scsi_ctlr_vhdl;
- device_controller_num_set(scsi_ctlr_vhdl, hardwired_scsi_controllers[i].controller_number);
- hwgraph_vertex_unref(scsi_ctlr_vhdl); /* (even though we're actually keeping a reference) */
- }
-
- hwgraph_vertex_unref(base_ibrick_xbridge_vhdl);
- }
-}
-
-
-#include <asm/sn/ioerror_handling.h>
-devfs_handle_t sys_critical_graph_root = GRAPH_VERTEX_NONE;
-
-/* Define the system critical vertices and connect them through
- * a canonical parent-child relationships for easy traversal
- * during io error handling.
- */
-static void
-sys_critical_graph_init(void)
-{
- devfs_handle_t bridge_vhdl,master_node_vhdl;
- devfs_handle_t xbow_vhdl = GRAPH_VERTEX_NONE;
- extern devfs_handle_t hwgraph_root;
- devfs_handle_t pci_slot_conn;
- int slot;
- devfs_handle_t baseio_console_conn;
-
- DBG("sys_critical_graph_init: FIXME.\n");
- baseio_console_conn = hwgraph_connectpt_get(baseio_console_vhdl);
-
- if (baseio_console_conn == NULL) {
- return;
- }
-
- /* Get the vertex handle for the baseio bridge */
- bridge_vhdl = device_master_get(baseio_console_conn);
-
- /* Get the master node of the baseio card */
- master_node_vhdl = cnodeid_to_vertex(
- master_node_get(baseio_console_vhdl));
-
- /* Add the "root->node" part of the system critical graph */
-
- sys_critical_graph_vertex_add(hwgraph_root,master_node_vhdl);
-
- /* Check if we have a crossbow */
- if (hwgraph_traverse(master_node_vhdl,
- EDGE_LBL_XTALK"/0",
- &xbow_vhdl) == GRAPH_SUCCESS) {
- /* We have a crossbow.Add "node->xbow" part of the system
- * critical graph.
- */
- sys_critical_graph_vertex_add(master_node_vhdl,xbow_vhdl);
-
- /* Add "xbow->baseio bridge" of the system critical graph */
- sys_critical_graph_vertex_add(xbow_vhdl,bridge_vhdl);
-
- hwgraph_vertex_unref(xbow_vhdl);
- } else
- /* We donot have a crossbow. Add "node->baseio_bridge"
- * part of the system critical graph.
- */
- sys_critical_graph_vertex_add(master_node_vhdl,bridge_vhdl);
-
- /* Add all the populated PCI slot vertices to the system critical
- * graph with the bridge vertex as the parent.
- */
- for (slot = 0 ; slot < 8; slot++) {
- char slot_edge[10];
-
- sprintf(slot_edge,"%d",slot);
- if (hwgraph_traverse(bridge_vhdl,slot_edge, &pci_slot_conn)
- != GRAPH_SUCCESS)
- continue;
- sys_critical_graph_vertex_add(bridge_vhdl,pci_slot_conn);
- hwgraph_vertex_unref(pci_slot_conn);
- }
-
- hwgraph_vertex_unref(bridge_vhdl);
-
- /* Add the "ioc3 pci connection point -> console ioc3" part
- * of the system critical graph
- */
-
- if (hwgraph_traverse(baseio_console_vhdl,"..",&pci_slot_conn) ==
- GRAPH_SUCCESS) {
- sys_critical_graph_vertex_add(pci_slot_conn,
- baseio_console_vhdl);
- hwgraph_vertex_unref(pci_slot_conn);
- }
-
- /* Add the "ethernet pci connection point -> base ethernet" part of
- * the system critical graph
- */
- if (hwgraph_traverse(baseio_enet_vhdl,"..",&pci_slot_conn) ==
- GRAPH_SUCCESS) {
- sys_critical_graph_vertex_add(pci_slot_conn,
- baseio_enet_vhdl);
- hwgraph_vertex_unref(pci_slot_conn);
- }
-
- /* Add the "scsi controller pci connection point -> base scsi
- * controller" part of the system critical graph
- */
- if (hwgraph_traverse(base_io_scsi_ctlr_vhdl[0],
- "../..",&pci_slot_conn) == GRAPH_SUCCESS) {
- sys_critical_graph_vertex_add(pci_slot_conn,
- base_io_scsi_ctlr_vhdl[0]);
- hwgraph_vertex_unref(pci_slot_conn);
- }
- if (hwgraph_traverse(base_io_scsi_ctlr_vhdl[1],
- "../..",&pci_slot_conn) == GRAPH_SUCCESS) {
- sys_critical_graph_vertex_add(pci_slot_conn,
- base_io_scsi_ctlr_vhdl[1]);
- hwgraph_vertex_unref(pci_slot_conn);
- }
- hwgraph_vertex_unref(baseio_console_conn);
-
-}
-
-static void
-baseio_ctlr_num_set(void)
-{
- char name[MAXDEVNAME];
- devfs_handle_t console_vhdl, pci_vhdl, enet_vhdl;
- devfs_handle_t ioc3_console_vhdl_get(void);
-
-
- DBG("baseio_ctlr_num_set; FIXME\n");
- console_vhdl = ioc3_console_vhdl_get();
- if (console_vhdl == GRAPH_VERTEX_NONE)
- return;
- /* Useful for setting up the system critical graph */
- baseio_console_vhdl = console_vhdl;
-
- vertex_to_name(console_vhdl,name,MAXDEVNAME);
-
- strcat(name,__DEVSTR1);
- pci_vhdl = hwgraph_path_to_vertex(name);
- scsi_ctlr_nums_add(pci_vhdl);
- /* Unref the pci_vhdl due to the reference by hwgraph_path_to_vertex
- */
- hwgraph_vertex_unref(pci_vhdl);
-
- vertex_to_name(console_vhdl, name, MAXDEVNAME);
- strcat(name, __DEVSTR4);
- enet_vhdl = hwgraph_path_to_vertex(name);
-
- /* Useful for setting up the system critical graph */
- baseio_enet_vhdl = enet_vhdl;
-
- device_controller_num_set(enet_vhdl, 0);
- /* Unref the enet_vhdl due to the reference by hwgraph_path_to_vertex
- */
- hwgraph_vertex_unref(enet_vhdl);
-}
-/* #endif */
-
-void
-sn00_rrb_alloc(devfs_handle_t vhdl, int *vendor_list)
-{
- /* REFERENCED */
- int rtn_val;
-
- /*
- ** sn00 population: errb orrb
- ** 0- ql 3+?
- ** 1- ql 2
- ** 2- ioc3 ethernet 2+?
- ** 3- ioc3 secondary 1
- ** 4- 0
- ** 5- PCI slot
- ** 6- PCI slot
- ** 7- PCI slot
- */
-
- /* The following code implements this heuristic for getting
- * maximum usage out of the rrbs
- *
- * constraints:
- * 8 bit ql1 needs 1+1
- * ql0 or ql5,6,7 wants 1+2
- * ethernet wants 2 or more
- *
- * rules for even rrbs:
- * if nothing in slot 6
- * 4 rrbs to 0 and 2 (0xc8889999)
- * else
- * 3 2 3 to slots 0 2 6 (0xc8899bbb)
- *
- * rules for odd rrbs
- * if nothing in slot 5 or 7 (0xc8889999)
- * 4 rrbs to 1 and 3
- * else if 1 thing in 5 or 7 (0xc8899aaa) or (0xc8899bbb)
- * 3 2 3 to slots 1 3 5|7
- * else
- * 2 1 3 2 to slots 1 3 5 7 (note: if there's a ql card in 7 this
- * (0xc89aaabb) may short what it wants therefore the
- * rule should be to plug pci slots in order)
- */
-
-
- if (vendor_list[6] != PCIIO_VENDOR_ID_NONE) {
- /* something in slot 6 */
- rtn_val = pcibr_alloc_all_rrbs(vhdl, 0, 3,1, 2,0, 0,0, 3,0);
- }
- else {
- rtn_val = pcibr_alloc_all_rrbs(vhdl, 0, 4,1, 4,0, 0,0, 0,0);
- }
- if (rtn_val)
- printk(KERN_WARNING "sn00_rrb_alloc: pcibr_alloc_all_rrbs failed");
-
- if ((vendor_list[5] != PCIIO_VENDOR_ID_NONE) &&
- (vendor_list[7] != PCIIO_VENDOR_ID_NONE)) {
- /* soemthing in slot 5 and 7 */
- rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 2,1, 1,0, 3,0, 2,0);
- }
- else if (vendor_list[5] != PCIIO_VENDOR_ID_NONE) {
- /* soemthing in slot 5 but not 7 */
- rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 3,1, 2,0, 3,0, 0,0);
- }
- else if (vendor_list[7] != PCIIO_VENDOR_ID_NONE) {
- /* soemthing in slot 7 but not 5 */
- rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 3,1, 2,0, 0,0, 3,0);
- }
- else {
- /* nothing in slot 5 or 7 */
- rtn_val = pcibr_alloc_all_rrbs(vhdl, 1, 4,1, 4,0, 0,0, 0,0);
- }
- if (rtn_val)
- printk(KERN_WARNING "sn00_rrb_alloc: pcibr_alloc_all_rrbs failed");
-}
-
-
-/*
- * Initialize all I/O devices. Starting closest to nodes, probe and
- * initialize outward.
- */
-void
-init_all_devices(void)
-{
- /* Governor on init threads..bump up when safe
- * (beware many devfs races)
- */
- cnodeid_t cnodeid, active;
-
- active = 0;
- for (cnodeid = 0; cnodeid < numnodes; cnodeid++) {
- DBG("init_all_devices: Calling io_init_node() for cnode %d\n", cnodeid);
- io_init_node(cnodeid);
-
- DBG("init_all_devices: Done io_init_node() for cnode %d\n", cnodeid);
- }
-
- for (cnodeid = 0; cnodeid < numnodes; cnodeid++)
- /*
- * Update information generated by IO init.
- */
- update_node_information(cnodeid);
-
- baseio_ctlr_num_set();
- /* Setup the system critical graph (which is a subgraph of the
- * main hwgraph). This information is useful during io error
- * handling.
- */
- sys_critical_graph_init();
-
-#if HWG_PRINT
- hwgraph_print();
-#endif
-
-}
-
-#define toint(x) ((int)(x) - (int)('0'))
-
-void
-devnamefromarcs(char *devnm)
-{
- int val;
- char tmpnm[MAXDEVNAME];
- char *tmp1, *tmp2;
-
- val = strncmp(devnm, "dks", 3);
- if (val != 0)
- return;
- tmp1 = devnm + 3;
- if (!isdigit(*tmp1))
- return;
-
- val = 0;
- while (isdigit(*tmp1)) {
- val = 10*val+toint(*tmp1);
- tmp1++;
- }
-
- if(*tmp1 != 'd')
- return;
- else
- tmp1++;
-
- if ((val < 0) || (val >= num_base_io_scsi_ctlr)) {
- int i;
- int viable_found = 0;
-
- DBG("Only controller numbers 0..%d are supported for\n", NUM_BASE_IO_SCSI_CTLR-1);
- DBG("prom \"root\" variables of the form dksXdXsX.\n");
- DBG("To use another disk you must use the full hardware graph path\n\n");
- DBG("Possible controller numbers for use in 'dksXdXsX' on this system: ");
- for (i=0; i<NUM_BASE_IO_SCSI_CTLR; i++) {
- if (base_io_scsi_ctlr_vhdl[i] != GRAPH_VERTEX_NONE) {
- DBG("%d ", i);
- viable_found=1;
- }
- }
- if (viable_found)
- DBG("\n");
- else
- DBG("none found!\n");
-
- DELAY(15000000);
- //prom_reboot();
- panic("FIXME: devnamefromarcs: should call prom_reboot here.\n");
- /* NOTREACHED */
- }
-
- ASSERT(base_io_scsi_ctlr_vhdl[val] != GRAPH_VERTEX_NONE);
- vertex_to_name(base_io_scsi_ctlr_vhdl[val],
- tmpnm,
- MAXDEVNAME);
- tmp2 = tmpnm + strlen(tmpnm);
- strcpy(tmp2, __DEVSTR2);
- tmp2 += strlen(__DEVSTR2);
- while (*tmp1 != 's') {
- if((*tmp2++ = *tmp1++) == '\0')
- return;
- }
- tmp1++;
- strcpy(tmp2, __DEVSTR3);
- tmp2 += strlen(__DEVSTR3);
- while ( (*tmp2++ = *tmp1++) )
- ;
- tmp2--;
- *tmp2++ = '/';
- strcpy(tmp2, EDGE_LBL_BLOCK);
- strcpy(devnm,tmpnm);
-}
-
-static
-struct io_brick_map_s io_brick_tab[] = {
-
-/* Ibrick widget number to PCI bus number map */
- { MODULE_IBRICK, /* Ibrick type */
- /* PCI Bus # Widget # */
- { 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
- 0, /* 0x8 */
- 0, /* 0x9 */
- 0, 0, /* 0xa - 0xb */
- 0, /* 0xc */
- 0, /* 0xd */
- 2, /* 0xe */
- 1 /* 0xf */
- }
- },
-
-/* Pbrick widget number to PCI bus number map */
- { MODULE_PBRICK, /* Pbrick type */
- /* PCI Bus # Widget # */
- { 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
- 2, /* 0x8 */
- 1, /* 0x9 */
- 0, 0, /* 0xa - 0xb */
- 5, /* 0xc */
- 6, /* 0xd */
- 4, /* 0xe */
- 3 /* 0xf */
- }
- },
-
-/* PXbrick widget number to PCI bus number map */
- { MODULE_PXBRICK, /* PXbrick type */
- /* PCI Bus # Widget # */
- { 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
- 0, /* 0x8 */
- 0, /* 0x9 */
- 0, 0, /* 0xa - 0xb */
- 1, /* 0xc */
- 5, /* 0xd */
- 0, /* 0xe */
- 3 /* 0xf */
- }
- },
-
-/* Xbrick widget to XIO slot map */
- { MODULE_XBRICK, /* Xbrick type */
- /* XIO Slot # Widget # */
- { 0, 0, 0, 0, 0, 0, 0, 0, /* 0x0 - 0x7 */
- 1, /* 0x8 */
- 3, /* 0x9 */
- 0, 0, /* 0xa - 0xb */
- 2, /* 0xc */
- 4, /* 0xd */
- 0, /* 0xe */
- 0 /* 0xf */
- }
- }
-};
-
-/*
- * Use the brick's type to map a widget number to a meaningful int
- */
-int
-io_brick_map_widget(int brick_type, int widget_num)
-{
- int num_bricks, i;
-
- /* Calculate number of bricks in table */
- num_bricks = sizeof(io_brick_tab)/sizeof(io_brick_tab[0]);
-
- /* Look for brick prefix in table */
- for (i = 0; i < num_bricks; i++) {
- if (brick_type == io_brick_tab[i].ibm_type)
- return(io_brick_tab[i].ibm_map_wid[widget_num]);
- }
-
- return 0;
-
-}
-
-/*
- * Use the device's vertex to map the device's widget to a meaningful int
- */
-int
-io_path_map_widget(devfs_handle_t vertex)
-{
- char hw_path_name[MAXDEVNAME];
- char *wp, *bp, *sp = NULL;
- int widget_num;
- long atoi(char *);
- int hwgraph_vertex_name_get(devfs_handle_t vhdl, char *buf, uint buflen);
-
-
- /* Get the full path name of the vertex */
- if (GRAPH_SUCCESS != hwgraph_vertex_name_get(vertex, hw_path_name,
- MAXDEVNAME))
- return 0;
-
- /* Find the widget number in the path name */
- wp = strstr(hw_path_name, "/"EDGE_LBL_XTALK"/");
- if (wp == NULL)
- return 0;
- widget_num = atoi(wp+7);
- if (widget_num < XBOW_PORT_8 || widget_num > XBOW_PORT_F)
- return 0;
-
- /* Find "brick" in the path name */
- bp = strstr(hw_path_name, "brick");
- if (bp == NULL)
- return 0;
-
- /* Find preceding slash */
- sp = bp;
- while (sp > hw_path_name) {
- sp--;
- if (*sp == '/')
- break;
- }
-
- /* Invalid if no preceding slash */
- if (!sp)
- return 0;
-
- /* Bump slash pointer to "brick" prefix */
- sp++;
- /*
- * Verify "brick" prefix length; valid exaples:
- * 'I' from "/Ibrick"
- * 'P' from "/Pbrick"
- * 'X' from "/Xbrick"
- */
- if ((bp - sp) != 1)
- return 0;
-
- return (io_brick_map_widget((int)*sp, widget_num));
-
-}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)