patch-2.4.22 linux-2.4.22/arch/arm/config.in
Next file: linux-2.4.22/arch/arm/def-configs/accelent_sa
Previous file: linux-2.4.22/arch/arm/common/pcipool.c
Back to the patch index
Back to the overall index
- Lines: 581
- Date:
2003-08-25 04:44:39.000000000 -0700
- Orig file:
linux-2.4.21/arch/arm/config.in
- Orig date:
2003-06-13 07:51:29.000000000 -0700
diff -urN linux-2.4.21/arch/arm/config.in linux-2.4.22/arch/arm/config.in
@@ -2,7 +2,7 @@
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
-mainmenu_name "Linux Kernel Configuration"
+mainmenu_name "ARM Linux Kernel Configuration"
define_bool CONFIG_ARM y
define_bool CONFIG_EISA n
@@ -39,14 +39,17 @@
CLPS711x/EP721x-based CONFIG_ARCH_CLPS711X \
Co-EBSA285 CONFIG_ARCH_CO285 \
EBSA-110 CONFIG_ARCH_EBSA110 \
- Epxa10db CONFIG_ARCH_CAMELOT \
+ Excalibur-ARM CONFIG_ARCH_CAMELOT \
FootBridge CONFIG_ARCH_FOOTBRIDGE \
Integrator CONFIG_ARCH_INTEGRATOR \
+ Omaha CONFIG_ARCH_OMAHA \
LinkUp-L7200 CONFIG_ARCH_L7200 \
Motorola-MX1ADS CONFIG_ARCH_MX1ADS \
RiscPC CONFIG_ARCH_RPC \
- SA1100-based CONFIG_ARCH_SA1100 \
- Shark CONFIG_ARCH_SHARK" RiscPC
+ RiscStation CONFIG_ARCH_RISCSTATION \
+ SA1100-based CONFIG_ARCH_SA1100 \
+ Shark CONFIG_ARCH_SHARK \
+ AT91RM9200-based CONFIG_ARCH_AT91RM9200 " RiscPC
mainmenu_option next_comment
comment 'Archimedes/A5000 Implementations'
@@ -69,10 +72,14 @@
mainmenu_option next_comment
comment 'SA11x0 Implementations'
+dep_bool ' ACCELENT DevBoard' CONFIG_SA1100_ACCELENT $CONFIG_ARCH_SA1100
dep_bool ' Assabet' CONFIG_SA1100_ASSABET $CONFIG_ARCH_SA1100
dep_bool ' Include support for Neponset' CONFIG_ASSABET_NEPONSET $CONFIG_SA1100_ASSABET
+dep_bool ' ADS Advanced Graphics Client' CONFIG_SA1100_ADSAGC $CONFIG_ARCH_SA1100
dep_bool ' ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
+dep_bool ' ADS Bitsy Plus' CONFIG_SA1100_ADSBITSYPLUS $CONFIG_ARCH_SA1100
dep_bool ' Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
+dep_bool ' Cep' CONFIG_SA1100_CEP $CONFIG_ARCH_SA1100
dep_bool ' CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_CERF" = "y" ]; then
choice 'Cerf RAM available' \
@@ -94,6 +101,8 @@
else
define_bool CONFIG_SA1100_H3XXX n
fi
+dep_tristate 'Compaq iPAQ Handheld sleeve support' CONFIG_H3600_SLEEVE $CONFIG_SA1100_H3600
+#dep_bool ' Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100
#dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
dep_bool ' Extenex HandHeld Theater (Squashtail)' CONFIG_SA1100_EXTENEX1 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_EXTENEX1" = "y" ]; then
@@ -104,6 +113,7 @@
dep_bool ' Frodo' CONFIG_SA1100_FRODO $CONFIG_ARCH_SA1100
dep_bool ' GraphicsClient Plus' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
dep_bool ' GraphicsMaster' CONFIG_SA1100_GRAPHICSMASTER $CONFIG_ARCH_SA1100
+dep_bool ' HackKit Core Board' CONFIG_SA1100_HACKKIT $CONFIG_ARCH_SA1100
dep_bool ' HP Labs BadgePAD 4' CONFIG_SA1100_BADGE4 $CONFIG_ARCH_SA1100
dep_bool ' HP Jornada 720' CONFIG_SA1100_JORNADA720 $CONFIG_ARCH_SA1100
dep_bool ' HuW WebPanel' CONFIG_SA1100_HUW_WEBPANEL $CONFIG_ARCH_SA1100
@@ -117,29 +127,23 @@
dep_bool ' Shannon' CONFIG_SA1100_SHANNON $CONFIG_ARCH_SA1100
dep_bool ' Sherman' CONFIG_SA1100_SHERMAN $CONFIG_ARCH_SA1100
dep_bool ' Simpad' CONFIG_SA1100_SIMPAD $CONFIG_ARCH_SA1100
+dep_bool ' Simputer' CONFIG_SA1100_SIMPUTER $CONFIG_ARCH_SA1100
dep_bool ' Tulsa' CONFIG_SA1100_PFS168 $CONFIG_ARCH_SA1100
dep_bool ' Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
dep_bool ' XP860' CONFIG_SA1100_XP860 $CONFIG_ARCH_SA1100
dep_bool ' Yopy' CONFIG_SA1100_YOPY $CONFIG_ARCH_SA1100
-# Determine if SA1111 support is required
-if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
- "$CONFIG_SA1100_JORNADA720" = "y" -o \
- "$CONFIG_SA1100_PFS168" = "y" -o \
- "$CONFIG_SA1100_XP860" = "y" -o \
- "$CONFIG_SA1100_GRAPHICSMASTER" = "y" -o \
- "$CONFIG_SA1100_PT_SYSTEM3" = "y" -o \
- "$CONFIG_SA1100_ADSBITSY" = "y" -o \
- "$CONFIG_SA1100_BADGE4" = "y" ]; then
- define_bool CONFIG_SA1111 y
- define_int CONFIG_FORCE_MAX_ZONEORDER 9
-fi
+dep_tristate 'SA1100 USB function support' CONFIG_SA1100_USB $CONFIG_ARCH_SA1100
+dep_tristate ' Support for SA11x0 USB network link function' CONFIG_SA1100_USB_NETLINK $CONFIG_SA1100_USB
+dep_tristate ' Support for SA11x0 USB character device emulation' CONFIG_SA1100_USB_CHAR $CONFIG_SA1100_USB
-#dep_tristate 'SA1100 USB function support' CONFIG_SA1100_USB $CONFIG_ARCH_SA1100
-#dep_tristate ' Support for SA11x0 USB network link function' CONFIG_SA1100_USB_NETLINK $CONFIG_SA1100_USB
-#dep_tristate ' Support for SA11x0 USB character device emulation' CONFIG_SA1100_USB_CHAR $CONFIG_SA1100_USB
+dep_tristate 'SA1100 Generic PIO SSP support' CONFIG_SA1100_SSP $CONFIG_ARCH_SA1100
-dep_tristate 'Compaq iPAQ Handheld sleeve support' CONFIG_H3600_SLEEVE $CONFIG_SA1100_H3600
+endmenu
+
+mainmenu_option next_comment
+comment 'AT91RM9200 Implementations'
+dep_bool ' Atmel AT91RM9200 Development Board' CONFIG_ARCH_AT91RM9200DK $CONFIG_ARCH_AT91RM9200
endmenu
mainmenu_option next_comment
@@ -148,8 +152,10 @@
dep_bool ' CDB89712' CONFIG_ARCH_CDB89712 $CONFIG_ARCH_CLPS711X
dep_bool ' CLEP7312' CONFIG_ARCH_CLEP7312 $CONFIG_ARCH_CLPS711X
dep_bool ' EDB7211' CONFIG_ARCH_EDB7211 $CONFIG_ARCH_CLPS711X
-dep_bool ' P720T' CONFIG_ARCH_P720T $CONFIG_ARCH_CLPS711X
dep_bool ' FORTUNET' CONFIG_ARCH_FORTUNET $CONFIG_ARCH_CLPS711X
+dep_bool ' GUIDEA07' CONFIG_ARCH_GUIDEA07 $CONFIG_ARCH_CLPS711X
+dep_bool ' P720T' CONFIG_ARCH_P720T $CONFIG_ARCH_CLPS711X
+
# XXX Maybe these should indicate register compatibility
# instead of being mutually exclusive.
@@ -168,6 +174,11 @@
"$CONFIG_ARCH_EP7212" = "y" ]; then
bool ' EP72xx ROM boot' CONFIG_EP72XX_ROM_BOOT
fi
+
+if [ "$CONFIG_ARCH_GUIDEA07" = "y" ]; then
+ define_bool CONFIG_ARCH_CDB89712 y
+fi
+
endmenu
# Definitions to make life easier
@@ -178,7 +189,8 @@
define_bool CONFIG_ARCH_ACORN n
fi
-# see Documentation/arm/ConfigVars for a description of these
+#####################################################################
+# Footbridge support
if [ "$CONFIG_ARCH_CO285" = "y" -o \
"$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
define_bool CONFIG_FOOTBRIDGE y
@@ -204,6 +216,42 @@
define_bool CONFIG_ARCH_EBSA285 y
fi
+#####################################################################
+# SA1111 support
+if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
+ "$CONFIG_SA1100_ACCELENT" = "y" -o \
+ "$CONFIG_SA1100_ADSAGC" = "y" -o \
+ "$CONFIG_SA1100_ADSBITSY" = "y" -o \
+ "$CONFIG_SA1100_ADSBITSYPLUS" = "y" -o \
+ "$CONFIG_SA1100_BADGE4" = "y" -o \
+ "$CONFIG_SA1100_CONSUS" = "y" -o \
+ "$CONFIG_SA1100_GRAPHICSMASTER" = "y" -o \
+ "$CONFIG_SA1100_JORNADA720" = "y" -o \
+ "$CONFIG_SA1100_PFS168" = "y" -o \
+ "$CONFIG_SA1100_PT_SYSTEM3" = "y" -o \
+ "$CONFIG_SA1100_XP860" = "y" ]; then
+ define_bool CONFIG_SA1111 y
+ define_int CONFIG_FORCE_MAX_ZONEORDER 9
+fi
+
+if [ "$CONFIG_ARCH_CAMELOT" = "y" ]; then
+ choice 'EPXA system type' \
+ "EPXA10DB CONFIG_EPXA10DB \
+ EPXA1DB CONFIG_EPXA1DB" EPXA10DB
+
+if [ "$CONFIG_EPXA10DB" = "y" ]; then
+ choice 'EPXA10B version' \
+ "SDR CONFIG_EPXA10DB_R2 \
+ DDR CONFIG_EPXA10DB_R3" DDR
+fi
+
+ comment 'PLD hotswap support'
+ define_bool CONFIG_PLD y
+ dep_bool 'Support for PLD device hotplugging' CONFIG_PLD_HOTSWAP $CONFIG_EXPERIMENTAL
+fi
+
+comment 'Processor Type'
+
# Figure out whether this system uses 26-bit or 32-bit CPUs.
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
define_bool CONFIG_CPU_32 n
@@ -214,28 +262,9 @@
define_bool CONFIG_CPU_26 n
fi
-comment 'Processor Type'
-
-# Firstly, figure out what processor architecture version we should be using.
-if [ "$CONFIG_ARCH_RPC" = "y" -o "$CONFIG_ARCH_CLPS7500" = "y" ]; then
- define_bool CONFIG_CPU_32v3 y
-else
- define_bool CONFIG_CPU_32v3 n
-fi
-if [ "$CONFIG_ARCH_EBSA110" = "y" -o "$CONFIG_FOOTBRIDGE" = "y" -o \
- "$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
- "$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
- "$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100" = "y" -o \
- "$CONFIG_ARCH_L7200" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" -o \
- "$CONFIG_ARCH_CAMELOT" = "y" -o "$CONFIG_ARCH_MX1ADS" = "y" ]; then
- define_bool CONFIG_CPU_32v4 y
-else
- define_bool CONFIG_CPU_32v4 n
-fi
-
-# Select CPU types depending on the architecture selected.
-# We use this to select which CPUs are supported, and to select
-# the compiler tuning options.
+# Select CPU types depending on the architecture selected. This selects
+# which CPUs we support in the kernel image, and the compiler instruction
+# optimiser behaviour.
# ARM610
if [ "$CONFIG_ARCH_RPC" = "y" ]; then
@@ -245,7 +274,8 @@
fi
# ARM710
-if [ "$CONFIG_ARCH_CLPS7500" = "y" ]; then
+if [ "$CONFIG_ARCH_CLPS7500" = "y" -o \
+ "$CONFIG_ARCH_RISCSTATION" = "y" ]; then
define_bool CONFIG_CPU_ARM710 y
else
if [ "$CONFIG_ARCH_RPC" = "y" ]; then
@@ -269,10 +299,12 @@
fi
# ARM920T
-if [ "$CONFIG_ARCH_MX1ADS" = "y" ]; then
+if [ "$CONFIG_ARCH_MX1ADS" = "y" -o \
+ "$CONFIG_ARCH_AT91RM9200" = "y" ]; then
define_bool CONFIG_CPU_ARM920T y
else
- if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
+ if [ "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
+ "$CONFIG_ARCH_OMAHA" = "y" ]; then
bool 'Support ARM920T processor' CONFIG_CPU_ARM920T
else
define_bool CONFIG_CPU_ARM920T n
@@ -280,28 +312,13 @@
fi
-if [ "$CONFIG_CPU_ARM920T" = "y" ]; then
- bool ' ARM920T CPU idle' CONFIG_CPU_ARM920_CPU_IDLE
- bool ' ARM920T I-Cache on' CONFIG_CPU_ARM920_I_CACHE_ON
- bool ' ARM920T D-Cache on' CONFIG_CPU_ARM920_D_CACHE_ON
- if [ "$CONFIG_CPU_ARM920_D_CACHE_ON" = "y" ] ; then
- bool ' Force write through caches on ARM920T' CONFIG_CPU_ARM920_WRITETHROUGH
- fi
-fi
-
# ARM922T
if [ "$CONFIG_ARCH_CAMELOT" = "y" ]; then
- define_bool CONFIG_CPU_ARM922T y
+ define_bool CONFIG_CPU_ARM922T y
+ define_bool CONFIG_PLD y
else
- define_bool CONFIG_CPU_ARM922T n
-fi
-if [ "$CONFIG_CPU_ARM922T" = "y" ]; then
- bool ' ARM922T CPU idle' CONFIG_CPU_ARM922_CPU_IDLE
- bool ' ARM922T I-Cache on' CONFIG_CPU_ARM922_I_CACHE_ON
- bool ' ARM922T D-Cache on' CONFIG_CPU_ARM922_D_CACHE_ON
- if [ "$CONFIG_CPU_ARM922_D_CACHE_ON" = "y" ] ; then
- bool ' Force write through caches on ARM922T' CONFIG_CPU_ARM922_WRITETHROUGH
- fi
+ define_bool CONFIG_CPU_ARM922T n
+ define_bool CONFIG_PLD n
fi
# ARM926T
@@ -310,18 +327,6 @@
else
define_bool CONFIG_CPU_ARM926T n
fi
-if [ "$CONFIG_CPU_ARM926T" = "y" ]; then
- bool ' ARM926T CPU idle' CONFIG_CPU_ARM926_CPU_IDLE
- bool ' ARM926T I-Cache on' CONFIG_CPU_ARM926_I_CACHE_ON
- bool ' ARM926T D-Cache on' CONFIG_CPU_ARM926_D_CACHE_ON
- if [ "$CONFIG_CPU_ARM926_D_CACHE_ON" = "y" ] ; then
- bool ' Force write through caches on ARM926T' CONFIG_CPU_ARM926_WRITETHROUGH
- fi
- if [ "$CONFIG_CPU_ARM926_I_CACHE_ON" = "y" -o \
- "$CONFIG_CPU_ARM926_D_CACHE_ON" = "y" ]; then
- bool ' Round robin I and D cache replacement algorithm' CONFIG_CPU_ARM926_ROUND_ROBIN
- fi
-fi
# ARM1020
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
@@ -329,16 +334,12 @@
else
define_bool CONFIG_CPU_ARM1020 n
fi
-if [ "$CONFIG_CPU_ARM1020" = "y" ]; then
- bool ' ARM1020 I-Cache on' CONFIG_CPU_ARM1020_I_CACHE_ON
- bool ' ARM10 D-Cache on' CONFIG_CPU_ARM1020_D_CACHE_ON
- if [ "$CONFIG_CPU_ARM1020_D_CACHE_ON" = "y" ] ; then
- bool ' Force write through caches on ARM1020' CONFIG_CPU_ARM1020_FORCE_WRITE_THROUGH
- fi
- if [ "$CONFIG_CPU_ARM1020_I_CACHE_ON" = "y" -o \
- "$CONFIG_CPU_ARM1020_D_CACHE_ON" = "y" ]; then
- bool ' Round robin I and D cache replacement algorithm' CONFIG_CPU_ARM1020_ROUND_ROBIN
- fi
+
+# ARM1026EJ-S
+if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
+ bool 'Support ARM1026EJ-S processor' CONFIG_CPU_ARM1026
+else
+ define_bool CONFIG_CPU_ARM1026 n
fi
# SA110
@@ -361,13 +362,59 @@
define_bool CONFIG_CPU_SA1100 n
fi
-if [ "$CONFIG_CPU_32" = "y" ]; then
- dep_bool 'Support Thumb instructions (experimental)' CONFIG_ARM_THUMB $CONFIG_EXPERIMENTAL
+# Figure out what processor architecture version we should be using.
+# This defines the compiler instruction set which depends on the machine type.
+
+if [ "$CONFIG_ARCH_RPC" = "y" -o \
+ "$CONFIG_ARCH_RISCSTATION" = "y" -o \
+ "$CONFIG_ARCH_CLPS7500" = "y" ]; then
+ define_bool CONFIG_CPU_32v3 y
+else
+ define_bool CONFIG_CPU_32v3 n
+fi
+if [ "$CONFIG_ARCH_EBSA110" = "y" -o "$CONFIG_FOOTBRIDGE" = "y" -o \
+ "$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
+ "$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
+ "$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100" = "y" -o \
+ "$CONFIG_ARCH_L7200" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" -o \
+ "$CONFIG_ARCH_CAMELOT" = "y" -o "$CONFIG_ARCH_MX1ADS" = "y" -o \
+ "$CONFIG_ARCH_OMAHA" = "y" -o "$CONFIG_ARCH_AT91RM9200" = "y" ]; then
+ define_bool CONFIG_CPU_32v4 y
+else
+ define_bool CONFIG_CPU_32v4 n
+fi
+
+comment 'Processor Features'
+
+if [ "$CONFIG_CPU_ARM720T" = "y" -o "$CONFIG_CPU_ARM920T" = "y" -o \
+ "$CONFIG_CPU_ARM922T" = "y" -o "$CONFIG_CPU_ARM926T" = "y" -o \
+ "$CONFIG_CPU_ARM1020" = "y" -o "$CONFIG_CPU_ARM1026" = "y" ]; then
+ dep_bool 'Support Thumb instructions (EXPERIMENTAL)' CONFIG_ARM_THUMB $CONFIG_EXPERIMENTAL
+fi
+if [ "$CONFIG_CPU_ARM920T" = "y" -o "$CONFIG_CPU_ARM922T" = "y" -o \
+ "$CONFIG_CPU_ARM926T" = "y" -o "$CONFIG_CPU_ARM1020" = "y" -o \
+ "$CONFIG_CPU_ARM1026" = "y" ]; then
+ bool 'Disable I-Cache' CONFIG_CPU_ICACHE_DISABLE
+ bool 'Disable D-Cache' CONFIG_CPU_DCACHE_DISABLE
+ if [ "$CONFIG_CPU_DISABLE_DCACHE" = "n" ]; then
+ bool 'Force write through D-cache' CONFIG_CPU_DCACHE_WRITETHROUGH
+ fi
+fi
+if [ "$CONFIG_CPU_ARM926T" = "y" -o "$CONFIG_CPU_ARM1020" = "y" -o \
+ "$CONFIG_CPU_ARM1026" = "y" ]; then
+ if [ "$CONFIG_CPU_ICACHE_DISABLE" = "n" -o "$CONFIG_CPU_DCACHE_DISABLE" = "n" ]; then
+ bool 'Round robin I and D cache replacement algorithm' CONFIG_CPU_CACHE_ROUND_ROBIN
+ fi
fi
+if [ "$CONFIG_CPU_ARM1020" = "y" -o "$CONFIG_CPU_ARM1026" = "y" ]; then
+ bool 'Disable branch prediction' CONFIG_CPU_BPREDICT_DISABLE
+fi
+
# Select various configuration options depending on the machine type
if [ "$CONFIG_ARCH_EDB7211" = "y" -o \
- "$CONFIG_ARCH_SA1100" = "y" ]; then
+ "$CONFIG_ARCH_SA1100" = "y" -o \
+ "$CONFIG_ARCH_RISCSTATION" = "y" ]; then
define_bool CONFIG_DISCONTIGMEM y
else
define_bool CONFIG_DISCONTIGMEM n
@@ -395,6 +442,7 @@
if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_CLPS7500" = "y" -o \
+ "$CONFIG_ARCH_RISCSTATION" = "y" -o \
"$CONFIG_ARCH_EBSA110" = "y" -o \
"$CONFIG_ARCH_CDB89712" = "y" -o \
"$CONFIG_ARCH_EDB7211" = "y" -o \
@@ -411,6 +459,12 @@
define_bool CONFIG_ISA_DMA n
fi
+# Compressed boot loader in ROM. Yes, we really want to ask about
+# TEXT and BSS so we preserve their values in the config files.
+bool 'Compressed boot loader in ROM/flash' CONFIG_ZBOOT_ROM
+hex 'Compressed ROM boot loader base address' CONFIG_ZBOOT_ROM_TEXT 0
+hex 'Compressed ROM boot loader BSS address' CONFIG_ZBOOT_ROM_BSS 0
+
if [ "$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
dep_bool 'Support CPU clock change (EXPERIMENTAL)' CONFIG_CPU_FREQ $CONFIG_EXPERIMENTAL
@@ -423,13 +477,23 @@
else
define_bool CONFIG_PCMCIA n
fi
+if [ "$CONFIG_SA1100_ACCELENT" = "y" ]; then
+ if [ "$CONFIG_PCMCIA" != "n" ]; then
+ bool ' Use second PCMCIA/CF slot (disables on-board IDE)' CONFIG_SA_PCMCIA_SLOT_1 y
+ fi
+fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
comment 'At least one math emulation must be selected'
tristate 'NWFPE math emulation' CONFIG_FPE_NWFPE
-dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_FPE_NWFPE" != "n" ]; then
+ bool ' Support extended precision' CONFIG_FPE_NWFPE_XP
+fi
+if [ "$CONFIG_CPU_26" = "n" -a "$CONFIG_CPU_32v3" = "n" ]; then
+ dep_tristate 'FastFPE math emulation (EXPERIMENTAL)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
+fi
choice 'Kernel core (/proc/kcore) format' \
"ELF CONFIG_KCORE_ELF \
A.OUT CONFIG_KCORE_AOUT" ELF
@@ -438,19 +502,8 @@
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
dep_bool 'Power Management support (experimental)' CONFIG_PM $CONFIG_EXPERIMENTAL
dep_tristate 'RISC OS personality' CONFIG_ARTHUR $CONFIG_CPU_32
+string 'Default kernel command string' CONFIG_CMDLINE ""
-if [ "$CONFIG_ARCH_EBSA110" = "y" -o \
- "$CONFIG_ARCH_SA1100" = "y" -o \
- "$CONFIG_ARCH_CLPS7500" = "y" -o \
- "$CONFIG_ARCH_PERSONAL_SERVER" = "y" -o \
- "$CONFIG_ARCH_CATS" = "y" -o \
- "$CONFIG_ARCH_P720T" = "y" -o \
- "$CONFIG_ARCH_CDB89712" = "y" -o \
- "$CONFIG_ARCH_CAMELOT" = "y" -o \
- "$CONFIG_ARCH_ANAKIN" = "y" -o \
- "$CONFIG_ARCH_MX1ADS" = "y" ]; then
- string 'Default kernel command string' CONFIG_CMDLINE ""
-fi
if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
"$CONFIG_ARCH_EBSA110" = "y" -o \
"$CONFIG_ARCH_EBSA285" = "y" -o \
@@ -460,7 +513,8 @@
"$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o \
"$CONFIG_ARCH_CDB89712" = "y" -o \
- "$CONFIG_ARCH_P720T" = "y" ]; then
+ "$CONFIG_ARCH_P720T" = "y" -o \
+ "$CONFIG_ARCH_OMAHA" = "y" ]; then
bool 'Timer and CPU usage LEDs' CONFIG_LEDS
if [ "$CONFIG_LEDS" = "y" ]; then
if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
@@ -469,17 +523,24 @@
"$CONFIG_ARCH_CO285" = "y" -o \
"$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o \
- "$CONFIG_ARCH_P720T" = "y" ]; then
+ "$CONFIG_ARCH_P720T" = "y" -o \
+ "$CONFIG_ARCH_OMAHA" = "y" ]; then
bool ' Timer LED' CONFIG_LEDS_TIMER
bool ' CPU usage LED' CONFIG_LEDS_CPU
fi
- fi
- if [ "$CONFIG_ARCH_EBSA110" = "y" ]; then
- define_bool CONFIG_LEDS_TIMER y
+ if [ "$CONFIG_ARCH_EBSA110" = "y" ]; then
+ define_bool CONFIG_LEDS_TIMER y
+ fi
fi
fi
-if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
- bool 'Kernel-mode alignment trap handler' CONFIG_ALIGNMENT_TRAP
+if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
+ define_bool CONFIG_ALIGNMENT_TRAP y
+else
+ if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
+ bool 'Kernel-mode alignment trap handler' CONFIG_ALIGNMENT_TRAP
+ else
+ define_bool CONFIG_ALIGNMENT_TRAP n
+ fi
fi
endmenu
@@ -487,6 +548,8 @@
if [ "$CONFIG_ALIGNMENT_TRAP" = "y" ]; then
source drivers/mtd/Config.in
+else
+ define_bool CONFIG_MTD n
fi
source drivers/pnp/Config.in
@@ -515,9 +578,9 @@
fi
mainmenu_option next_comment
-comment 'ATA/IDE/MFM/RLL support'
+comment 'ATA/ATAPI/MFM/RLL support'
-tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
+tristate 'ATA/ATAPI/MFM/RLL support' CONFIG_IDE
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
@@ -538,7 +601,8 @@
endmenu
if [ "$CONFIG_ARCH_CLPS711X" = "y" ]; then
- source drivers/scsi/Config.in
+ # This is _meant_ to be ssi _not_ scsi. It is not a spelling error.
+ source drivers/ssi/Config.in
fi
source drivers/ieee1394/Config.in
@@ -602,7 +666,7 @@
"$CONFIG_ARCH_MX1ADS" = "y" ]; then
define_bool CONFIG_PC_KEYMAP y
fi
- if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
+ if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" -a "$CONFIG_ARCH_RISCSTATION" != "y" ]; then
bool 'VGA text console' CONFIG_VGA_CONSOLE
fi
source drivers/video/Config.in
@@ -611,6 +675,7 @@
if [ "$CONFIG_ARCH_ACORN" = "y" -o \
"$CONFIG_ARCH_CLPS7500" = "y" -o \
+ "$CONFIG_ARCH_RISCSTATION" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_SA1100" = "y" -o \
@@ -618,7 +683,7 @@
mainmenu_option next_comment
comment 'Sound'
- tristate 'Sound card support' CONFIG_SOUND
+ tristate 'Sound support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
source drivers/sound/Config.in
fi
@@ -629,7 +694,9 @@
source drivers/usb/Config.in
-source net/bluetooth/Config.in
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ source net/bluetooth/Config.in
+fi
mainmenu_option next_comment
comment 'Kernel hacking'
@@ -638,7 +705,16 @@
# you know what you are doing and are willing to live without stack traces, you
# can get a slightly smaller kernel by setting this option to n, but then RMK
# will have to kill you ;).
-define_bool CONFIG_FRAME_POINTER y
+if [ "$CONFIG_ARCH_OMAHA" = "y" ]; then
+ #
+ # Note: We want all the performance we can get, so this means
+ # we accept the debugging limitations of setting CONFIG_FRAME_POINTER=n
+ # -- ahaigh@arm.com (23 August 2002)
+ define_bool CONFIG_FRAME_POINTER n
+else
+ define_bool CONFIG_FRAME_POINTER y
+fi
+
bool 'Verbose user fault messages' CONFIG_DEBUG_USER
bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO
dep_bool 'Disable pgtable cache' CONFIG_NO_PGT_CACHE $CONFIG_CPU_26
@@ -650,10 +726,11 @@
dep_bool ' Wait queue debugging' CONFIG_DEBUG_WAITQ $CONFIG_DEBUG_KERNEL
dep_bool ' Verbose BUG() reporting (adds 70K)' CONFIG_DEBUG_BUGVERBOSE $CONFIG_DEBUG_KERNEL
dep_bool ' Verbose kernel error messages' CONFIG_DEBUG_ERRORS $CONFIG_DEBUG_KERNEL
-# These options are only for real kernel hackers who want to get their hands dirty.
+# These options are only for real kernel hackers who want to get their hands dirty.
dep_bool ' Kernel low-level debugging functions' CONFIG_DEBUG_LL $CONFIG_DEBUG_KERNEL
dep_bool ' Kernel low-level debugging messages via footbridge serial port' CONFIG_DEBUG_DC21285_PORT $CONFIG_DEBUG_LL $CONFIG_FOOTBRIDGE
dep_bool ' Kernel low-level debugging messages via UART2' CONFIG_DEBUG_CLPS711X_UART2 $CONFIG_DEBUG_LL $CONFIG_ARCH_CLPS711X
endmenu
+source crypto/Config.in
source lib/Config.in
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)