patch-2.2.13 linux/drivers/isdn/hisax/bkm_a4t.c

• Lines: 117
• Date: Tue Oct 19 17:14:00 1999
• Orig file: v2.2.12/linux/drivers/isdn/hisax/bkm_a4t.c
• Orig date: Tue Oct 19 17:10:37 1999

diff -u --recursive --new-file v2.2.12/linux/drivers/isdn/hisax/bkm_a4t.c linux/drivers/isdn/hisax/bkm_a4t.c
@@ -1,4 +1,4 @@
-/* $Id: bkm_a4t.c,v 1.6 1999/08/11 21:01:22 keil Exp $
+/* $Id: bkm_a4t.c,v 1.8 1999/09/04 06:20:05 keil Exp $
  * bkm_a4t.c    low level stuff for T-Berkom A4T
  *              derived from the original file sedlbauer.c
  *              derived from the original file niccy.c
@@ -7,6 +7,15 @@
  * Author       Roland Klabunde (R.Klabunde@Berkom.de)
  *
  * $Log: bkm_a4t.c,v $
+ * Revision 1.8  1999/09/04 06:20:05  keil
+ * Changes from kernel set_current_state()
+ *
+ * Revision 1.7  1999/08/22 20:26:55  calle
+ * backported changes from kernel 2.3.14:
+ * - several #include "config.h" gone, others come.
+ * - "struct device" changed to "struct net_device" in 2.3.14, added a
+ *   define in isdn_compat.h for older kernel versions.
+ *
  * Revision 1.6  1999/08/11 21:01:22  keil
  * new PCI codefix
  *
@@ -28,6 +37,7 @@
 
 #define __NO_VERSION__
 
+#include <linux/config.h>
 #include "hisax.h"
 #include "isac.h"
 #include "hscx.h"
@@ -35,13 +45,10 @@
 #include "isdnl1.h"
 #include "bkm_ax.h"
 #include <linux/pci.h>
-#ifndef COMPAT_HAS_NEW_PCI
-#include <linux/bios32.h>
-#endif
 
 extern const char *CardType[];
 
-const char *bkm_a4t_revision = "$Revision: 1.6 $";
+const char *bkm_a4t_revision = "$Revision: 1.8 $";
 
 
 static inline u_char
@@ -281,11 +288,7 @@
 	return (0);
 }
 
-#ifdef COMPAT_HAS_NEW_PCI
 static struct pci_dev *dev_a4t __initdata = NULL;
-#else
-static int pci_index __initdata = 0;
-#endif
 
 __initfunc(int
 	   setup_bkm_a4t(struct IsdnCard *card))
@@ -295,9 +298,6 @@
 	u_int pci_memaddr = 0, found = 0;
 	I20_REGISTER_FILE *pI20_Regs;
 #if CONFIG_PCI
-#ifndef COMPAT_HAS_NEW_PCI
-	u_char pci_bus, pci_device_fn, pci_irq = 0;
-#endif
 #endif
 
 	strcpy(tmp, bkm_a4t_revision);
@@ -308,7 +308,6 @@
 		return (0);
 
 #if CONFIG_PCI
-#ifdef COMPAT_HAS_NEW_PCI
 	if (!pci_present()) {
 		printk(KERN_ERR "bkm_a4t: no PCI bus present\n");
 		return (0);
@@ -320,40 +319,14 @@
 			&sub_sys_id);
 		if (sub_sys_id == ((A4T_SUBSYS_ID << 16) | A4T_SUBVEN_ID)) {
 			found = 1;
-			pci_memaddr = get_pcibase(dev_a4t, 0);
+			pci_memaddr = dev_a4t->base_address[ 0];
 			cs->irq = dev_a4t->irq;
 		}
 	}
-#else
-	for (; pci_index < 0xff; pci_index++) {
-		if (pcibios_find_device(I20_VENDOR_ID,
-				I20_DEVICE_ID,
-				pci_index,
-				&pci_bus,
-				&pci_device_fn) == PCIBIOS_SUCCESSFUL) {
-			u_int sub_sys_id = 0;
-
-			pcibios_read_config_dword(pci_bus, pci_device_fn,
-				PCI_SUBSYSTEM_VENDOR_ID, &sub_sys_id);
-			if (sub_sys_id == ((A4T_SUBSYS_ID << 16) | A4T_SUBVEN_ID)) {
-				found = 1;
-				pcibios_read_config_byte(pci_bus, pci_device_fn,
-					   PCI_INTERRUPT_LINE, &pci_irq);
-				cs->irq = pci_irq;
-				pcibios_read_config_dword(pci_bus, pci_device_fn,
-				       PCI_BASE_ADDRESS_0, &pci_memaddr);
-				break;
-			}
-		}
-	}
-#endif				/* COMPAT_HAS_NEW_PCI */
 	if (!found) {
 		printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
 		return (0);
 	}
-#ifndef COMPAT_HAS_NEW_PCI
-	pci_index++;
-#endif
 	if (!cs->irq) {		/* IRQ range check ?? */
 		printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
 		return (0);