patch-2.0.31 linux/drivers/scsi/tmscsim.c

Next file: linux/drivers/scsi/tmscsim.h
Previous file: linux/drivers/scsi/st.c
Back to the patch index
Back to the overall index

diff -u --recursive --new-file v2.0.30/linux/drivers/scsi/tmscsim.c linux/drivers/scsi/tmscsim.c
@@ -0,0 +1,1928 @@
+/***********************************************************************
+ *	FILE NAME : TMSCSIM.C					       *
+ *	     BY   : C.L. Huang,  ching@tekram.com.tw		       *
+ *	Description: Device Driver for Tekram DC-390(T) PCI SCSI       *
+ *		     Bus Master Host Adapter			       *
+ * (C)Copyright 1995-1996 Tekram Technology Co., Ltd.		       *
+ ***********************************************************************/
+/*	Minor enhancements and bugfixes by				*
+ *	Kurt Garloff <K.Garloff@ping.de>				*
+ ***********************************************************************/
+/*	HISTORY:							*
+ *									*
+ *	REV#	DATE	NAME	DESCRIPTION				*
+ *	1.00  04/24/96	CLH	First release				*
+ *	1.01  06/12/96	CLH	Fixed bug of Media Change for Removable *
+ *				Device, scan all LUN. Support Pre2.0.10 *
+ *	1.02  06/18/96	CLH	Fixed bug of Command timeout ...	*
+ *	1.03  09/25/96	KG	Added tmscsim_proc_info()		*
+ *	1.04  10/11/96	CLH	Updating for support KV 2.0.x		*
+ *	1.05  10/18/96	KG	Fixed bug in DC390_abort(null ptr deref)*
+ *	1.06  10/25/96	KG	Fixed module support			*
+ *	1.07  11/09/96	KG	Fixed tmscsim_proc_info()		*
+ *	1.08  11/18/96	KG	Fixed null ptr in DC390_Disconnect()	*
+ *	1.09  11/30/96	KG	Added register the allocated IO space	*
+ *	1.10  12/05/96	CLH	Modified tmscsim_proc_info(), and reset *
+ *				pending interrupt in DC390_detect()	*
+ ***********************************************************************/
+
+
+#define DC390_DEBUG
+
+#define SCSI_MALLOC
+
+#ifdef MODULE
+#include <linux/module.h>
+#endif
+
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/delay.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/bios32.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/config.h>
+
+#include <linux/version.h>
+#if LINUX_VERSION_CODE < 66354 /* 1.3.50 */
+#include "../block/blk.h"
+#else
+#include <linux/blk.h>
+#endif
+
+#include "scsi.h"
+#include "hosts.h"
+#include "tmscsim.h"
+#include "constants.h"
+#include "sd.h"
+#include <linux/stat.h>
+
+#include "dc390.h"
+
+#define PCI_DEVICE_ID_AMD53C974 	PCI_DEVICE_ID_AMD_SCSI
+
+
+#ifndef  VERSION_ELF_1_2_13
+struct proc_dir_entry	proc_scsi_tmscsim ={
+       PROC_SCSI_DC390T, 7 ,"tmscsim",
+       S_IFDIR | S_IRUGO | S_IXUGO, 2
+       };
+#endif
+
+static USHORT DC390_StartSCSI( PACB pACB, PDCB pDCB, PSRB pSRB );
+static void DC390_DataOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_DataIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_Command_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_Status_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_MsgOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_MsgIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_DataOutPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_DataInPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_CommandPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_StatusPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_MsgOutPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_MsgInPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_Nop_0( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+static void DC390_Nop_1( PACB pACB, PSRB pSRB, PUCHAR psstatus);
+
+static void SetXferRate( PACB pACB, PDCB pDCB );
+static void DC390_Disconnect( PACB pACB );
+static void DC390_Reselect( PACB pACB );
+static void SRBdone( PACB pACB, PDCB pDCB, PSRB pSRB );
+static void DoingSRB_Done( PACB pACB );
+static void DC390_ScsiRstDetect( PACB pACB );
+static void DC390_ResetSCSIBus( PACB pACB );
+static void RequestSense( PACB pACB, PDCB pDCB, PSRB pSRB );
+static void EnableMsgOut2( PACB pACB, PSRB pSRB );
+static void EnableMsgOut( PACB pACB, PSRB pSRB );
+static void DC390_InvalidCmd( PACB pACB );
+
+int    DC390_initAdapter( PSH psh, ULONG io_port, UCHAR Irq, USHORT index );
+void   DC390_initDCB( PACB pACB, PDCB pDCB, PSCSICMD cmd );
+
+#ifdef MODULE
+static int DC390_release(struct Scsi_Host *host);
+static int DC390_shutdown (struct Scsi_Host *host);
+#endif
+
+
+static PSHT	pSHT_start = NULL;
+static PSH	pSH_start = NULL;
+static PSH	pSH_current = NULL;
+static PACB	pACB_start= NULL;
+static PACB	pACB_current = NULL;
+static PDCB	pPrevDCB = NULL;
+static USHORT	adapterCnt = 0;
+static USHORT	InitialTime = 0;
+static USHORT	CurrSyncOffset = 0;
+static ULONG	mech1addr;
+static UCHAR	mech2bus, mech2Agent, mech2CfgSPenR;
+
+static PVOID DC390_phase0[]={
+       DC390_DataOut_0,
+       DC390_DataIn_0,
+       DC390_Command_0,
+       DC390_Status_0,
+       DC390_Nop_0,
+       DC390_Nop_0,
+       DC390_MsgOut_0,
+       DC390_MsgIn_0,
+       DC390_Nop_1
+       };
+
+static PVOID DC390_phase1[]={
+       DC390_DataOutPhase,
+       DC390_DataInPhase,
+       DC390_CommandPhase,
+       DC390_StatusPhase,
+       DC390_Nop_0,
+       DC390_Nop_0,
+       DC390_MsgOutPhase,
+       DC390_MsgInPhase,
+       DC390_Nop_1,
+       };
+
+UCHAR  eepromBuf[MAX_ADAPTER_NUM][128];
+
+
+UCHAR  clock_period1[] = {4, 5, 6, 7, 8, 10, 13, 20};
+
+UCHAR  baddevname1[2][28] ={
+       "SEAGATE ST3390N         9546",
+       "HP      C3323-300       4269"};
+
+#define BADDEVCNT	2
+
+
+/***********************************************************************
+ *
+ *
+ *
+ **********************************************************************/
+static void
+QLinkcmd( PSCSICMD cmd, PDCB pDCB )
+{
+    ULONG  flags;
+    PSCSICMD  pcmd;
+
+    save_flags(flags);
+    cli();
+
+    if( !pDCB->QIORBCnt )
+    {
+	pDCB->pQIORBhead = cmd;
+	pDCB->pQIORBtail = cmd;
+	pDCB->QIORBCnt++;
+	cmd->next = NULL;
+    }
+    else
+    {
+	pcmd = pDCB->pQIORBtail;
+	pcmd->next = cmd;
+	pDCB->pQIORBtail = cmd;
+	pDCB->QIORBCnt++;
+	cmd->next = NULL;
+    }
+
+    restore_flags(flags);
+}
+
+
+static PSCSICMD
+Getcmd( PDCB pDCB )
+{
+    ULONG  flags;
+    PSCSICMD  pcmd;
+
+    save_flags(flags);
+    cli();
+
+    pcmd = pDCB->pQIORBhead;
+    pDCB->pQIORBhead = pcmd->next;
+    pcmd->next = NULL;
+    pDCB->QIORBCnt--;
+
+    restore_flags(flags);
+    return( pcmd );
+}
+
+
+static PSRB
+GetSRB( PACB pACB )
+{
+    ULONG  flags;
+    PSRB   pSRB;
+
+    save_flags(flags);
+    cli();
+
+    pSRB = pACB->pFreeSRB;
+    if( pSRB )
+    {
+	pACB->pFreeSRB = pSRB->pNextSRB;
+	pSRB->pNextSRB = NULL;
+    }
+    restore_flags(flags);
+    return( pSRB );
+}
+
+
+static void
+RewaitSRB0( PDCB pDCB, PSRB pSRB )
+{
+    PSRB   psrb1;
+    ULONG  flags;
+
+    save_flags(flags);
+    cli();
+
+    if( (psrb1 = pDCB->pWaitingSRB) )
+    {
+	pSRB->pNextSRB = psrb1;
+	pDCB->pWaitingSRB = pSRB;
+    }
+    else
+    {
+	pSRB->pNextSRB = NULL;
+	pDCB->pWaitingSRB = pSRB;
+	pDCB->pWaitLast = pSRB;
+    }
+    restore_flags(flags);
+}
+
+
+static void
+RewaitSRB( PDCB pDCB, PSRB pSRB )
+{
+    PSRB   psrb1;
+    ULONG  flags;
+    UCHAR  bval;
+
+    save_flags(flags);
+    cli();
+    pDCB->GoingSRBCnt--;
+    psrb1 = pDCB->pGoingSRB;
+    if( pSRB == psrb1 )
+    {
+	pDCB->pGoingSRB = psrb1->pNextSRB;
+    }
+    else
+    {
+	while( pSRB != psrb1->pNextSRB )
+	    psrb1 = psrb1->pNextSRB;
+	psrb1->pNextSRB = pSRB->pNextSRB;
+	if( pSRB == pDCB->pGoingLast )
+	    pDCB->pGoingLast = psrb1;
+    }
+    if( (psrb1 = pDCB->pWaitingSRB) )
+    {
+	pSRB->pNextSRB = psrb1;
+	pDCB->pWaitingSRB = pSRB;
+    }
+    else
+    {
+	pSRB->pNextSRB = NULL;
+	pDCB->pWaitingSRB = pSRB;
+	pDCB->pWaitLast = pSRB;
+    }
+
+    bval = pSRB->TagNumber;
+    pDCB->TagMask &= (~(1 << bval));	  /* Free TAG number */
+    restore_flags(flags);
+}
+
+
+static void
+DoWaitingSRB( PACB pACB )
+{
+    ULONG  flags;
+    PDCB   ptr, ptr1;
+    PSRB   pSRB;
+
+    save_flags(flags);
+    cli();
+
+    if( !(pACB->pActiveDCB) && !(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV) ) )
+    {
+	ptr = pACB->pDCBRunRobin;
+	if( !ptr )
+	{
+	    ptr = pACB->pLinkDCB;
+	    pACB->pDCBRunRobin = ptr;
+	}
+	ptr1 = ptr;
+	for( ;ptr1; )
+	{
+	    pACB->pDCBRunRobin = ptr1->pNextDCB;
+	    if( !( ptr1->MaxCommand > ptr1->GoingSRBCnt ) ||
+		!( pSRB = ptr1->pWaitingSRB ) )
+	    {
+		if(pACB->pDCBRunRobin == ptr)
+		    break;
+		ptr1 = ptr1->pNextDCB;
+	    }
+	    else
+	    {
+		if( !DC390_StartSCSI(pACB, ptr1, pSRB) )
+		{
+		    ptr1->GoingSRBCnt++;
+		    if( ptr1->pWaitLast == pSRB )
+		    {
+			ptr1->pWaitingSRB = NULL;
+			ptr1->pWaitLast = NULL;
+		    }
+		    else
+		    {
+			ptr1->pWaitingSRB = pSRB->pNextSRB;
+		    }
+		    pSRB->pNextSRB = NULL;
+
+		    if( ptr1->pGoingSRB )
+			ptr1->pGoingLast->pNextSRB = pSRB;
+		    else
+			ptr1->pGoingSRB = pSRB;
+		    ptr1->pGoingLast = pSRB;
+		}
+		break;
+	    }
+	}
+    }
+    restore_flags(flags);
+    return;
+}
+
+
+static void
+SRBwaiting( PDCB pDCB, PSRB pSRB)
+{
+    if( pDCB->pWaitingSRB )
+    {
+	pDCB->pWaitLast->pNextSRB = pSRB;
+	pDCB->pWaitLast = pSRB;
+	pSRB->pNextSRB = NULL;
+    }
+    else
+    {
+	pDCB->pWaitingSRB = pSRB;
+	pDCB->pWaitLast = pSRB;
+    }
+}
+
+
+static void
+SendSRB( PSCSICMD pcmd, PACB pACB, PSRB pSRB )
+{
+    ULONG  flags;
+    PDCB   pDCB;
+
+    save_flags(flags);
+    cli();
+
+    pDCB = pSRB->pSRBDCB;
+    if( !(pDCB->MaxCommand > pDCB->GoingSRBCnt) || (pACB->pActiveDCB) ||
+	(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV)) )
+    {
+	SRBwaiting(pDCB, pSRB);
+	goto SND_EXIT;
+    }
+
+    if( pDCB->pWaitingSRB )
+    {
+	SRBwaiting(pDCB, pSRB);
+/*	pSRB = GetWaitingSRB(pDCB); */
+	pSRB = pDCB->pWaitingSRB;
+	pDCB->pWaitingSRB = pSRB->pNextSRB;
+	pSRB->pNextSRB = NULL;
+    }
+
+    if( !DC390_StartSCSI(pACB, pDCB, pSRB) )
+    {
+	pDCB->GoingSRBCnt++;
+	if( pDCB->pGoingSRB )
+	{
+	    pDCB->pGoingLast->pNextSRB = pSRB;
+	    pDCB->pGoingLast = pSRB;
+	}
+	else
+	{
+	    pDCB->pGoingSRB = pSRB;
+	    pDCB->pGoingLast = pSRB;
+	}
+    }
+    else
+	RewaitSRB0( pDCB, pSRB );
+
+SND_EXIT:
+    restore_flags(flags);
+    return;
+}
+
+
+/***********************************************************************
+ * Function : static int DC390_queue_command (Scsi_Cmnd *cmd,
+ *					       void (*done)(Scsi_Cmnd *))
+ *
+ * Purpose : enqueues a SCSI command
+ *
+ * Inputs : cmd - SCSI command, done - function called on completion, with
+ *	    a pointer to the command descriptor.
+ *
+ * Returns : 0
+ *
+ ***********************************************************************/
+
+int
+DC390_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *))
+{
+    USHORT ioport, i;
+    Scsi_Cmnd *pcmd;
+    struct Scsi_Host *psh;
+    PACB   pACB;
+    PDCB   pDCB;
+    PSRB   pSRB;
+    ULONG  flags;
+    PUCHAR ptr,ptr1;
+
+    psh = cmd->host;
+    pACB = (PACB ) psh->hostdata;
+    ioport = pACB->IOPortBase;
+
+#ifdef DC390_DEBUG0
+/*  if(pACB->scan_devices) */
+	printk("Cmd=%2x,ID=%d,LUN=%d,",cmd->cmnd[0],cmd->target,cmd->lun);
+#endif
+
+    if( (pACB->scan_devices == END_SCAN) && (cmd->cmnd[0] != INQUIRY) )
+    {
+	pACB->scan_devices = 0;
+	pPrevDCB->pNextDCB = pACB->pLinkDCB;
+    }
+    else if( (pACB->scan_devices) && (cmd->cmnd[0] == 8) )
+    {
+	pACB->scan_devices = 0;
+	pPrevDCB->pNextDCB = pACB->pLinkDCB;
+    }
+
+    if ( ( cmd->target > pACB->max_id ) || (cmd->lun > pACB->max_lun) )
+    {
+/*	printk("DC390: Ignore target %d lun %d\n",
+		cmd->target, cmd->lun); */
+	cmd->result = (DID_BAD_TARGET << 16);
+	done(cmd);
+	return( 0 );
+    }
+
+    if( (pACB->scan_devices) && !(pACB->DCBmap[cmd->target] & (1 << cmd->lun)) )
+    {
+	if( pACB->DeviceCnt < MAX_DEVICES )
+	{
+	    pACB->DCBmap[cmd->target] |= (1 << cmd->lun);
+	    pDCB = pACB->pDCB_free;
+#ifdef DC390_DEBUG0
+	    printk("pDCB=%8x,ID=%2x,", (UINT) pDCB, cmd->target);
+#endif
+	    DC390_initDCB( pACB, pDCB, cmd );
+	}
+	else	/* ???? */
+	{
+/*	    printk("DC390: Ignore target %d lun %d\n",
+		    cmd->target, cmd->lun); */
+	    cmd->result = (DID_BAD_TARGET << 16);
+	    done(cmd);
+	    return(0);
+	}
+    }
+    else if( !(pACB->scan_devices) && !(pACB->DCBmap[cmd->target] & (1 << cmd->lun)) )
+    {
+/*	printk("DC390: Ignore target %d lun %d\n",
+		cmd->target, cmd->lun); */
+	cmd->result = (DID_BAD_TARGET << 16);
+	done(cmd);
+	return(0);
+    }
+    else
+    {
+	pDCB = pACB->pLinkDCB;
+	while( (pDCB->UnitSCSIID != cmd->target) ||
+	       (pDCB->UnitSCSILUN != cmd->lun) )
+	{
+	    pDCB = pDCB->pNextDCB;
+	}
+#ifdef DC390_DEBUG0
+	    printk("pDCB=%8x,ID=%2x,", (UINT) pDCB, cmd->target);
+#endif
+    }
+
+    cmd->scsi_done = done;
+    cmd->result = 0;
+
+    save_flags(flags);
+    cli();
+
+    if( pDCB->QIORBCnt )
+    {
+	QLinkcmd( cmd, pDCB );
+	pcmd = Getcmd( pDCB );
+    }
+    else
+	pcmd = cmd;
+
+    pSRB = GetSRB( pACB );
+
+    if( !pSRB )
+    {
+	QLinkcmd( pcmd, pDCB );
+	restore_flags(flags);
+	return(0);
+    }
+
+/*  BuildSRB(pSRB); */
+
+    pSRB->pSRBDCB = pDCB;
+    pSRB->pcmd = pcmd;
+    ptr = (PUCHAR) pSRB->CmdBlock;
+    ptr1 = (PUCHAR) pcmd->cmnd;
+    pSRB->ScsiCmdLen = pcmd->cmd_len;
+    for(i=0; i< pcmd->cmd_len; i++)
+    {
+	*ptr = *ptr1;
+	ptr++;
+	ptr1++;
+    }
+    if( pcmd->use_sg )
+    {
+	pSRB->SGcount = (UCHAR) pcmd->use_sg;
+	pSRB->pSegmentList = (PSGL) pcmd->request_buffer;
+    }
+    else if( pcmd->request_buffer )
+    {
+	pSRB->SGcount = 1;
+	pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
+	pSRB->Segmentx.address = (PUCHAR) pcmd->request_buffer;
+	pSRB->Segmentx.length = pcmd->request_bufflen;
+    }
+    else
+	pSRB->SGcount = 0;
+
+    pSRB->SGIndex = 0;
+    pSRB->AdaptStatus = 0;
+    pSRB->TargetStatus = 0;
+    pSRB->MsgCnt = 0;
+    if( pDCB->DevType != TYPE_TAPE )
+	pSRB->RetryCnt = 1;
+    else
+	pSRB->RetryCnt = 0;
+    pSRB->SRBStatus = 0;
+    pSRB->SRBFlag = 0;
+    pSRB->SRBState = 0;
+    pSRB->TotalXferredLen = 0;
+    pSRB->SGPhysAddr = 0;
+    pSRB->SGToBeXferLen = 0;
+    pSRB->ScsiPhase = 0;
+    pSRB->EndMessage = 0;
+    SendSRB( pcmd, pACB, pSRB );
+
+    restore_flags(flags);
+    return(0);
+}
+
+
+static void
+DoNextCmd( PACB pACB, PDCB pDCB )
+{
+    Scsi_Cmnd *pcmd;
+    PSRB   pSRB;
+    ULONG  flags;
+    PUCHAR ptr,ptr1;
+    USHORT i;
+
+
+    if( pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV) )
+	return;
+    save_flags(flags);
+    cli();
+
+    pcmd = Getcmd( pDCB );
+    pSRB = GetSRB( pACB );
+    if( !pSRB )
+    {
+	QLinkcmd( pcmd, pDCB );
+	restore_flags(flags);
+	return;
+    }
+
+    pSRB->pSRBDCB = pDCB;
+    pSRB->pcmd = pcmd;
+    ptr = (PUCHAR) pSRB->CmdBlock;
+    ptr1 = (PUCHAR) pcmd->cmnd;
+    pSRB->ScsiCmdLen = pcmd->cmd_len;
+    for(i=0; i< pcmd->cmd_len; i++)
+    {
+	*ptr = *ptr1;
+	ptr++;
+	ptr1++;
+    }
+    if( pcmd->use_sg )
+    {
+	pSRB->SGcount = (UCHAR) pcmd->use_sg;
+	pSRB->pSegmentList = (PSGL) pcmd->request_buffer;
+    }
+    else if( pcmd->request_buffer )
+    {
+	pSRB->SGcount = 1;
+	pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
+	pSRB->Segmentx.address = (PUCHAR) pcmd->request_buffer;
+	pSRB->Segmentx.length = pcmd->request_bufflen;
+    }
+    else
+	pSRB->SGcount = 0;
+
+    pSRB->SGIndex = 0;
+    pSRB->AdaptStatus = 0;
+    pSRB->TargetStatus = 0;
+    pSRB->MsgCnt = 0;
+    if( pDCB->DevType != TYPE_TAPE )
+	pSRB->RetryCnt = 1;
+    else
+	pSRB->RetryCnt = 0;
+    pSRB->SRBStatus = 0;
+    pSRB->SRBFlag = 0;
+    pSRB->SRBState = 0;
+    pSRB->TotalXferredLen = 0;
+    pSRB->SGPhysAddr = 0;
+    pSRB->SGToBeXferLen = 0;
+    pSRB->ScsiPhase = 0;
+    pSRB->EndMessage = 0;
+    SendSRB( pcmd, pACB, pSRB );
+
+    restore_flags(flags);
+    return;
+}
+
+
+/***********************************************************************
+ * Function:
+ *   DC390_bios_param
+ *
+ * Description:
+ *   Return the disk geometry for the given SCSI device.
+ ***********************************************************************/
+#ifdef	VERSION_ELF_1_2_13
+int DC390_bios_param(Disk *disk, int devno, int geom[])
+#else
+int DC390_bios_param(Disk *disk, kdev_t devno, int geom[])
+#endif
+{
+    int heads, sectors, cylinders;
+    PACB pACB;
+
+    pACB = (PACB) disk->device->host->hostdata;
+    heads = 64;
+    sectors = 32;
+    cylinders = disk->capacity / (heads * sectors);
+
+    if ( cylinders > 1024)
+    {
+      heads = 255;
+      sectors = 63;
+      cylinders = disk->capacity / (255 * 63);
+    }
+
+    geom[0] = heads;
+    geom[1] = sectors;
+    geom[2] = cylinders;
+
+    return (0);
+}
+
+
+/***********************************************************************
+ * Function : int DC390_abort (Scsi_Cmnd *cmd)
+ *
+ * Purpose : Abort an errant SCSI command
+ *
+ * Inputs : cmd - command to abort
+ *
+ * Returns : 0 on success, -1 on failure.
+ ***********************************************************************/
+
+int
+DC390_abort (Scsi_Cmnd *cmd)
+{
+    ULONG flags;
+    PACB  pACB;
+    PDCB  pDCB, pdcb;
+    PSRB  pSRB, psrb;
+    USHORT count, i;
+    PSCSICMD  pcmd, pcmd1;
+    int   status;
+
+
+#ifdef DC390_DEBUG0
+    printk("DC390 : Abort Cmd.");
+#endif
+
+    save_flags(flags);
+    cli();
+
+    pACB = (PACB) cmd->host->hostdata;
+    pDCB = pACB->pLinkDCB;
+    pdcb = pDCB;
+    while( (pDCB->UnitSCSIID != cmd->target) ||
+	   (pDCB->UnitSCSILUN != cmd->lun) )
+    {
+	pDCB = pDCB->pNextDCB;
+	if( pDCB == pdcb )
+	    goto  NOT_RUN;
+    }
+
+    if( pDCB->QIORBCnt )
+    {
+	pcmd = pDCB->pQIORBhead;
+	if( pcmd == cmd )
+	{
+	    pDCB->pQIORBhead = pcmd->next;
+	    pcmd->next = NULL;
+	    pDCB->QIORBCnt--;
+	    status = SCSI_ABORT_SUCCESS;
+	    goto  ABO_X;
+	}
+	for( count = pDCB->QIORBCnt, i=0; i<count-1; i++)
+	{
+	    if( pcmd->next == cmd )
+	    {
+		pcmd1 = pcmd->next;
+		pcmd->next = pcmd1->next;
+		pcmd1->next = NULL;
+		pDCB->QIORBCnt--;
+		status = SCSI_ABORT_SUCCESS;
+		goto  ABO_X;
+	    }
+	    else
+	    {
+		pcmd = pcmd->next;
+	    }
+	}
+    }
+
+    pSRB = pDCB->pWaitingSRB;
+    if( !pSRB )
+	goto  ON_GOING;
+    if( pSRB->pcmd == cmd )
+    {
+	pDCB->pWaitingSRB = pSRB->pNextSRB;
+	goto  IN_WAIT;
+    }
+    else
+    {
+	psrb = pSRB;
+	if( !(psrb->pNextSRB) )
+	    goto ON_GOING;
+	while( psrb->pNextSRB->pcmd != cmd )
+	{
+	    psrb = psrb->pNextSRB;
+	    if( !(psrb->pNextSRB) )
+		goto ON_GOING;
+	}
+	pSRB = psrb->pNextSRB;
+	psrb->pNextSRB = pSRB->pNextSRB;
+	if( pSRB == pDCB->pWaitLast )
+	    pDCB->pWaitLast = psrb; /* No check for psrb == NULL ? */
+IN_WAIT:
+	pSRB->pNextSRB = pACB->pFreeSRB;
+	pACB->pFreeSRB = pSRB;
+	cmd->next = NULL;
+	status = SCSI_ABORT_SUCCESS;
+	goto  ABO_X;
+    }
+
+ON_GOING:
+    pSRB = pDCB->pGoingSRB;
+    for( count = pDCB->GoingSRBCnt, i=0; i<count; i++)
+    {
+	if( pSRB->pcmd != cmd )
+	    pSRB = pSRB->pNextSRB;
+	else
+	{
+	    if( (pACB->pActiveDCB == pDCB) && (pDCB->pActiveSRB == pSRB) )
+	    {
+		status = SCSI_ABORT_BUSY;
+		goto  ABO_X;
+	    }
+	    else
+	    {
+		status = SCSI_ABORT_SNOOZE;
+		goto  ABO_X;
+	    }
+	}
+    }
+
+NOT_RUN:
+    status = SCSI_ABORT_NOT_RUNNING;
+
+ABO_X:
+    cmd->result = DID_ABORT << 16;
+    cmd->scsi_done(cmd);
+    restore_flags(flags);
+    return( status );
+}
+
+
+static void
+ResetDevParam( PACB pACB )
+{
+    PDCB   pDCB, pdcb;
+
+    pDCB = pACB->pLinkDCB;
+    if( pDCB == NULL )
+	return;
+    pdcb = pDCB;
+    do
+    {
+	pDCB->SyncMode &= ~SYNC_NEGO_DONE;
+	pDCB->SyncPeriod = 0;
+	pDCB->SyncOffset = 0;
+	pDCB->CtrlR3 = FAST_CLK;
+	pDCB->CtrlR4 &= NEGATE_REQACKDATA;
+	pDCB->CtrlR4 |= EATER_25NS;
+	pDCB = pDCB->pNextDCB;
+    }
+    while( pdcb != pDCB );
+}
+
+
+static void
+RecoverSRB( PACB pACB )
+{
+    PDCB   pDCB, pdcb;
+    PSRB   psrb, psrb2;
+    USHORT cnt, i;
+
+    pDCB = pACB->pLinkDCB;
+    if( pDCB == NULL )
+	return;
+    pdcb = pDCB;
+    do
+    {
+	cnt = pdcb->GoingSRBCnt;
+	psrb = pdcb->pGoingSRB;
+	for (i=0; i<cnt; i++)
+	{
+	    psrb2 = psrb;
+	    psrb = psrb->pNextSRB;
+/*	    RewaitSRB( pDCB, psrb ); */
+	    if( pdcb->pWaitingSRB )
+	    {
+		psrb2->pNextSRB = pdcb->pWaitingSRB;
+		pdcb->pWaitingSRB = psrb2;
+	    }
+	    else
+	    {
+		pdcb->pWaitingSRB = psrb2;
+		pdcb->pWaitLast = psrb2;
+		psrb2->pNextSRB = NULL;
+	    }
+	}
+	pdcb->GoingSRBCnt = 0;
+	pdcb->pGoingSRB = NULL;
+	pdcb->TagMask = 0;
+	pdcb = pdcb->pNextDCB;
+    }
+    while( pdcb != pDCB );
+}
+
+
+/***********************************************************************
+ * Function : int DC390_reset (Scsi_Cmnd *cmd, ...)
+ *
+ * Purpose : perform a hard reset on the SCSI bus
+ *
+ * Inputs : cmd - command which caused the SCSI RESET
+ *
+ * Returns : 0 on success.
+ ***********************************************************************/
+
+#ifdef	VERSION_2_0_0
+int DC390_reset(Scsi_Cmnd *cmd, unsigned int resetFlags)
+#else
+int DC390_reset (Scsi_Cmnd *cmd)
+#endif
+{
+    USHORT   ioport;
+    unsigned long flags;
+    PACB  pACB;
+    UCHAR    bval;
+    USHORT  i;
+
+
+#ifdef DC390_DEBUG1
+    printk("DC390: RESET,");
+#endif
+
+    pACB = (PACB ) cmd->host->hostdata;
+    ioport = pACB->IOPortBase;
+    save_flags(flags);
+    cli();
+    bval = inb(ioport+CtrlReg1);
+    bval |= DIS_INT_ON_SCSI_RST;
+    outb(bval,ioport+CtrlReg1);  /* disable interrupt */
+    DC390_ResetSCSIBus( pACB );
+    for( i=0; i<500; i++ )
+	udelay(1000);
+    bval = inb(ioport+CtrlReg1);
+    bval &= ~DIS_INT_ON_SCSI_RST;
+    outb(bval,ioport+CtrlReg1); /* re-enable interrupt */
+
+    bval = DMA_IDLE_CMD;
+    outb(bval,ioport+DMA_Cmd);
+    bval = CLEAR_FIFO_CMD;
+    outb(bval,ioport+ScsiCmd);
+
+    ResetDevParam( pACB );
+    DoingSRB_Done( pACB );
+    pACB->pActiveDCB = NULL;
+
+    pACB->ACBFlag = 0;
+    DoWaitingSRB( pACB );
+
+    restore_flags(flags);
+#ifdef DC390_DEBUG1
+    printk("DC390: RESET1,");
+#endif
+    return( SCSI_RESET_SUCCESS );
+}
+
+
+#include "scsiiom.c"
+
+
+/***********************************************************************
+ * Function : static void DC390_initDCB
+ *
+ * Purpose :  initialize the internal structures for a given DCB
+ *
+ * Inputs : cmd - pointer to this scsi cmd request block structure
+ *
+ ***********************************************************************/
+void DC390_initDCB( PACB pACB, PDCB pDCB, PSCSICMD cmd )
+{
+    PEEprom	prom;
+    UCHAR	bval;
+    USHORT	index;
+
+    if( pACB->DeviceCnt == 0 )
+    {
+	pACB->pLinkDCB = pDCB;
+	pACB->pDCBRunRobin = pDCB;
+	pDCB->pNextDCB = pDCB;
+	pPrevDCB = pDCB;
+    }
+    else
+	pPrevDCB->pNextDCB = pDCB;
+
+    pDCB->pDCBACB = pACB;
+    pDCB->QIORBCnt = 0;
+    pDCB->UnitSCSIID = cmd->target;
+    pDCB->UnitSCSILUN = cmd->lun;
+    pDCB->pWaitingSRB = NULL;
+    pDCB->pGoingSRB = NULL;
+    pDCB->GoingSRBCnt = 0;
+    pDCB->pActiveSRB = NULL;
+    pDCB->TagMask = 0;
+    pDCB->MaxCommand = 1;
+    pDCB->AdaptIndex = pACB->AdapterIndex;
+    index = pACB->AdapterIndex;
+    pDCB->DCBFlag = 0;
+
+    prom = (PEEprom) &eepromBuf[index][cmd->target << 2];
+    pDCB->DevMode = prom->EE_MODE1;
+    pDCB->AdpMode = eepromBuf[index][EE_MODE2];
+
+    if( pDCB->DevMode & EN_DISCONNECT_ )
+	bval = 0xC0;
+    else
+	bval = 0x80;
+    bval |= cmd->lun;
+    pDCB->IdentifyMsg = bval;
+
+    pDCB->SyncMode = 0;
+    if( pDCB->DevMode & SYNC_NEGO_ )
+    {
+	if( !(cmd->lun) || CurrSyncOffset )
+	    pDCB->SyncMode = SYNC_ENABLE;
+    }
+
+    pDCB->SyncPeriod = 0;
+    pDCB->SyncOffset = 0;
+    pDCB->NegoPeriod = (clock_period1[prom->EE_SPEED] * 25) >> 2;
+
+    pDCB->CtrlR1 = pACB->AdaptSCSIID;
+    if( pDCB->DevMode & PARITY_CHK_ )
+	pDCB->CtrlR1 |= PARITY_ERR_REPO;
+
+    pDCB->CtrlR3 = FAST_CLK;
+
+    pDCB->CtrlR4 = EATER_25NS;
+    if( pDCB->AdpMode & ACTIVE_NEGATION)
+	pDCB->CtrlR4 |= NEGATE_REQACKDATA;
+}
+
+
+/***********************************************************************
+ * Function : static void DC390_initSRB
+ *
+ * Purpose :  initialize the internal structures for a given SRB
+ *
+ * Inputs : psrb - pointer to this scsi request block structure
+ *
+ ***********************************************************************/
+void DC390_initSRB( PSRB psrb )
+{
+#ifndef VERSION_ELF_1_2_13
+#ifdef DC390_DEBUG0
+   printk("DC390 init: %08lx %08lx,",(ULONG)psrb,(ULONG)virt_to_bus(psrb));
+#endif
+	psrb->PhysSRB = virt_to_bus( psrb );
+#else
+	psrb->PhysSRB = (ULONG) psrb;
+#endif
+}
+
+
+void DC390_linkSRB( PACB pACB )
+{
+    USHORT  count, i;
+    PSRB    psrb;
+
+    count = pACB->SRBCount;
+
+    for( i=0; i< count; i++)
+    {
+	if( i != count - 1)
+	    pACB->SRB_array[i].pNextSRB = &pACB->SRB_array[i+1];
+	else
+	    pACB->SRB_array[i].pNextSRB = NULL;
+	psrb = (PSRB) &pACB->SRB_array[i];
+	DC390_initSRB( psrb );
+    }
+}
+
+
+/***********************************************************************
+ * Function : static void DC390_initACB
+ *
+ * Purpose :  initialize the internal structures for a given SCSI host
+ *
+ * Inputs : psh - pointer to this host adapter's structure
+ *
+ ***********************************************************************/
+void DC390_initACB( PSH psh, ULONG io_port, UCHAR Irq, USHORT index )
+{
+    PACB    pACB;
+    USHORT  i;
+
+    psh->can_queue = MAX_CMD_QUEUE;
+    psh->cmd_per_lun = MAX_CMD_PER_LUN;
+    psh->this_id = (int) eepromBuf[index][EE_ADAPT_SCSI_ID];
+    psh->io_port = io_port;
+    psh->n_io_port = 0x80;
+    psh->irq = Irq;
+
+    pACB = (PACB) psh->hostdata;
+
+#ifndef VERSION_ELF_1_2_13
+    psh->max_id = 8;
+#ifdef	CONFIG_SCSI_MULTI_LUN
+    if( eepromBuf[index][EE_MODE2] & LUN_CHECK )
+	psh->max_lun = 8;
+    else
+#endif
+	psh->max_lun = 1;
+#endif
+
+    pACB->max_id = 7;
+    if( pACB->max_id == eepromBuf[index][EE_ADAPT_SCSI_ID] )
+	pACB->max_id--;
+#ifdef	CONFIG_SCSI_MULTI_LUN
+    if( eepromBuf[index][EE_MODE2] & LUN_CHECK )
+	pACB->max_lun = 7;
+    else
+#endif
+	pACB->max_lun = 0;
+
+    pACB->pScsiHost = psh;
+    pACB->IOPortBase = (USHORT) io_port;
+    pACB->pLinkDCB = NULL;
+    pACB->pDCBRunRobin = NULL;
+    pACB->pActiveDCB = NULL;
+    pACB->pFreeSRB = pACB->SRB_array;
+    pACB->SRBCount = MAX_SRB_CNT;
+    pACB->AdapterIndex = index;
+    pACB->status = 0;
+    pACB->AdaptSCSIID = eepromBuf[index][EE_ADAPT_SCSI_ID];
+    pACB->HostID_Bit = (1 << pACB->AdaptSCSIID);
+    pACB->AdaptSCSILUN = 0;
+    pACB->DeviceCnt = 0;
+    pACB->IRQLevel = Irq;
+    pACB->TagMaxNum = eepromBuf[index][EE_TAG_CMD_NUM] << 2;
+    pACB->ACBFlag = 0;
+    pACB->scan_devices = 1;
+    pACB->Gmode2 = eepromBuf[index][EE_MODE2];
+    if( eepromBuf[index][EE_MODE2] & LUN_CHECK )
+	pACB->LUNchk = 1;
+    pACB->pDCB_free = &pACB->DCB_array[0];
+    DC390_linkSRB( pACB );
+    pACB->pTmpSRB = &pACB->TmpSRB;
+    DC390_initSRB( pACB->pTmpSRB );
+    for(i=0; i<MAX_SCSI_ID; i++)
+	pACB->DCBmap[i] = 0;
+}
+
+
+/***********************************************************************
+ * Function : static int DC390_initAdapter
+ *
+ * Purpose :  initialize the SCSI chip ctrl registers
+ *
+ * Inputs : psh - pointer to this host adapter's structure
+ *
+ ***********************************************************************/
+int DC390_initAdapter( PSH psh, ULONG io_port, UCHAR Irq, USHORT index )
+{
+    USHORT ioport;
+    UCHAR  bval;
+    PACB   pACB, pacb;
+    USHORT used_irq = 0;
+
+    pacb = pACB_start;
+    if( pacb != NULL )
+    {
+	for ( ; (pacb != (PACB) -1) ; )
+	{
+	    if( pacb->IRQLevel == Irq )
+	    {
+		used_irq = 1;
+		break;
+	    }
+	    else
+		pacb = pacb->pNextACB;
+	}
+    }
+
+    if( !used_irq )
+    {
+#ifdef	VERSION_ELF_1_2_13
+	if( request_irq(Irq, DC390_Interrupt, SA_INTERRUPT, "tmscsim"))
+#else
+	if( request_irq(Irq, DC390_Interrupt, SA_INTERRUPT, "tmscsim", NULL))
+#endif
+	{
+	    printk("DC390: register IRQ error!\n");
+	    return( -1 );
+	}
+    }
+
+    request_region(io_port,psh->n_io_port,"tmscsim");
+
+    ioport = (USHORT) io_port;
+
+    pACB = (PACB) psh->hostdata;
+    bval = SEL_TIMEOUT; 		/* 250ms selection timeout */
+    outb(bval,ioport+Scsi_TimeOut);
+
+    bval = CLK_FREQ_40MHZ;		/* Conversion factor = 0 , 40MHz clock */
+    outb(bval,ioport+Clk_Factor);
+
+    bval = NOP_CMD;			/* NOP cmd - clear command register */
+    outb(bval,ioport+ScsiCmd);
+
+    bval = EN_FEATURE+EN_SCSI2_CMD;	/* Enable Feature and SCSI-2 */
+    outb(bval,ioport+CtrlReg2);
+
+    bval = FAST_CLK;			/* fast clock */
+    outb(bval,ioport+CtrlReg3);
+
+    bval = EATER_25NS;
+    if( eepromBuf[index][EE_MODE2] & ACTIVE_NEGATION )
+	 bval |= NEGATE_REQACKDATA;
+    outb(bval,ioport+CtrlReg4);
+
+    bval = DIS_INT_ON_SCSI_RST; 	/* Disable SCSI bus reset interrupt */
+    outb(bval,ioport+CtrlReg1);
+
+    return(0);
+}
+
+
+void
+DC390_EnableCfg( USHORT mechnum, UCHAR regval )
+{
+    ULONG wlval;
+
+    if(mechnum == 2)
+    {
+	outb(mech2bus, PCI_CFG2_FORWARD_REG);
+	outb(mech2CfgSPenR, PCI_CFG2_ENABLE_REG);
+    }
+    else
+    {
+	regval &= 0xFC;
+	wlval = mech1addr;
+	wlval |= (((ULONG)regval) & 0xff);
+	outl(wlval, PCI_CFG1_ADDRESS_REG);
+    }
+}
+
+
+void
+DC390_DisableCfg( USHORT mechnum )
+{
+
+    if(mechnum == 2)
+	outb(0, PCI_CFG2_ENABLE_REG);
+    else
+	outl(0, PCI_CFG1_ADDRESS_REG);
+}
+
+
+UCHAR
+DC390_inByte( USHORT mechnum, UCHAR regval )
+{
+    UCHAR bval;
+    ULONG wval;
+    ULONG flags;
+
+    save_flags(flags);
+    cli();
+    DC390_EnableCfg( mechnum, regval );
+    if(mechnum == 2)
+    {
+	wval = mech2Agent;
+	wval <<= 8;
+	wval |= ((USHORT) regval) & 0xff;
+	bval = inb(wval);
+    }
+    else
+    {
+	regval &= 3;
+	bval = inb(PCI_CFG1_DATA_REG | regval);
+    }
+    DC390_DisableCfg(mechnum);
+    restore_flags(flags);
+    return(bval);
+}
+
+
+USHORT
+DC390_inWord( USHORT mechnum, UCHAR regval )
+{
+    USHORT wval;
+    ULONG flags;
+
+    save_flags(flags);
+    cli();
+    DC390_EnableCfg(mechnum,regval);
+    if(mechnum == 2)
+    {
+	wval = mech2Agent;
+	wval <<= 8;
+	wval |= regval;
+	wval = inw(wval);
+    }
+    else
+    {
+	regval &= 3;
+	wval = inw(PCI_CFG1_DATA_REG | regval);
+    }
+    DC390_DisableCfg(mechnum);
+    restore_flags(flags);
+    return(wval);
+}
+
+
+ULONG
+DC390_inDword(USHORT mechnum, UCHAR regval )
+{
+    ULONG wlval;
+    ULONG flags;
+    USHORT wval;
+
+    save_flags(flags);
+    cli();
+    DC390_EnableCfg(mechnum,regval);
+    if(mechnum == 2)
+    {
+	wval = mech2Agent;
+	wval <<= 8;
+	wval |= regval;
+	wlval = inl(wval);
+    }
+    else
+    {
+	wlval = inl(PCI_CFG1_DATA_REG);
+    }
+    DC390_DisableCfg(mechnum);
+    restore_flags(flags);
+    return(wlval);
+}
+
+
+void
+DC390_OutB(USHORT mechnum, UCHAR regval, UCHAR bval )
+{
+
+    USHORT wval;
+    ULONG  flags;
+
+    save_flags(flags);
+    cli();
+    DC390_EnableCfg(mechnum,regval);
+    if(mechnum == 2)
+    {
+	wval = mech2Agent;
+	wval <<= 8;
+	wval |= regval;
+	outb(bval, wval);
+    }
+    else
+    {
+	regval &= 3;
+	outb(bval, PCI_CFG1_DATA_REG | regval);
+    }
+    DC390_DisableCfg(mechnum);
+    restore_flags(flags);
+}
+
+
+void
+DC390_EnDisableCE( UCHAR mode, USHORT mechnum, PUCHAR regval )
+{
+
+    UCHAR bval;
+
+    bval = 0;
+    if(mode == ENABLE_CE)
+	*regval = 0xc0;
+    else
+	*regval = 0x80;
+    DC390_OutB(mechnum,*regval,bval);
+    if(mode == DISABLE_CE)
+	DC390_OutB(mechnum,*regval,bval);
+    udelay(160);
+}
+
+
+void
+DC390_EEpromOutDI( USHORT mechnum, PUCHAR regval, USHORT Carry )
+{
+    UCHAR bval;
+
+    bval = 0;
+    if(Carry)
+    {
+	bval = 0x40;
+	*regval = 0x80;
+	DC390_OutB(mechnum,*regval,bval);
+    }
+    udelay(160);
+    bval |= 0x80;
+    DC390_OutB(mechnum,*regval,bval);
+    udelay(160);
+    bval = 0;
+    DC390_OutB(mechnum,*regval,bval);
+    udelay(160);
+}
+
+
+UCHAR
+DC390_EEpromInDO( USHORT mechnum )
+{
+    UCHAR bval,regval;
+
+    regval = 0x80;
+    bval = 0x80;
+    DC390_OutB(mechnum,regval,bval);
+    udelay(160);
+    bval = 0x40;
+    DC390_OutB(mechnum,regval,bval);
+    udelay(160);
+    regval = 0x0;
+    bval = DC390_inByte(mechnum,regval);
+    if(bval == 0x22)
+	return(1);
+    else
+	return(0);
+}
+
+
+USHORT
+EEpromGetData1( USHORT mechnum )
+{
+    UCHAR i;
+    UCHAR carryFlag;
+    USHORT wval;
+
+    wval = 0;
+    for(i=0; i<16; i++)
+    {
+	wval <<= 1;
+	carryFlag = DC390_EEpromInDO(mechnum);
+	wval |= carryFlag;
+    }
+    return(wval);
+}
+
+
+void
+DC390_Prepare( USHORT mechnum, PUCHAR regval, UCHAR EEpromCmd )
+{
+    UCHAR i,j;
+    USHORT carryFlag;
+
+    carryFlag = 1;
+    j = 0x80;
+    for(i=0; i<9; i++)
+    {
+	DC390_EEpromOutDI(mechnum,regval,carryFlag);
+	carryFlag = (EEpromCmd & j) ? 1 : 0;
+	j >>= 1;
+    }
+}
+
+
+void
+DC390_ReadEEprom( USHORT mechnum, USHORT index )
+{
+    UCHAR   regval,cmd;
+    PUSHORT ptr;
+    USHORT  i;
+
+    ptr = (PUSHORT) &eepromBuf[index][0];
+    cmd = EEPROM_READ;
+    for(i=0; i<0x40; i++)
+    {
+	DC390_EnDisableCE(ENABLE_CE, mechnum, &regval);
+	DC390_Prepare(mechnum, &regval, cmd);
+	*ptr = EEpromGetData1(mechnum);
+	ptr++;
+	cmd++;
+	DC390_EnDisableCE(DISABLE_CE,mechnum,&regval);
+    }
+}
+
+
+USHORT
+DC390_CheckEEpromCheckSum( USHORT MechNum, USHORT index )
+{
+    USHORT wval, rc, *ptr;
+    UCHAR  i;
+
+    DC390_ReadEEprom( MechNum, index );
+    wval = 0;
+    ptr = (PUSHORT) &eepromBuf[index][0];
+    for(i=0; i<128 ;i+=2, ptr++)
+	wval += *ptr;
+    if( wval == 0x1234 )
+	rc = 0;
+    else
+	rc = -1;
+    return( rc );
+}
+
+
+USHORT
+DC390_ToMech( USHORT Mechnum, USHORT BusDevFunNum )
+{
+    USHORT devnum;
+
+    devnum = BusDevFunNum;
+
+    if(Mechnum == 2)
+    {
+	if(devnum & 0x80)
+	     return(-1);
+	mech2bus = (UCHAR)((devnum & 0xff00) >> 8);	  /* Bus num */
+	mech2Agent = ((UCHAR)(devnum & 0xff)) >> 3;	  /* Dev num */
+	mech2Agent |= 0xc0;
+	mech2CfgSPenR = ((UCHAR)(devnum & 0xff)) & 0x07;  /* Fun num */
+	mech2CfgSPenR = (mech2CfgSPenR << 1) | 0x20;
+    }
+    else	/* use mech #1 method */
+    {
+	mech1addr = 0x80000000 | ((ULONG)devnum << 8);
+    }
+    return(0);
+}
+
+/***********************************************************************
+ * Function : static int DC390_init (struct Scsi_Host *host)
+ *
+ * Purpose :  initialize the internal structures for a given SCSI host
+ *
+ * Inputs : host - pointer to this host adapter's structure/
+ *
+ * Preconditions : when this function is called, the chip_type
+ *	field of the pACB structure MUST have been set.
+ ***********************************************************************/
+
+static int
+DC390_init (PSHT psht, ULONG io_port, UCHAR Irq, USHORT index, USHORT MechNum)
+{
+    PSH   psh;
+    PACB  pACB;
+
+    if( !DC390_CheckEEpromCheckSum( MechNum, index) )
+    {
+	psh = scsi_register( psht, sizeof(DC390_ACB) );
+	if( !psh )
+	    return( -1 );
+	if( !pSH_start )
+	{
+	    pSH_start = psh;
+	    pSH_current = psh;
+	}
+	else
+	{
+	    pSH_current->next = psh;
+	    pSH_current = psh;
+	}
+
+#ifdef DC390_DEBUG0
+	printk("DC390: pSH = %8x,", (UINT) psh);
+	printk("DC390: Index %02i,", index);
+#endif
+
+	DC390_initACB( psh, io_port, Irq, index );
+	if( !DC390_initAdapter( psh, io_port, Irq, index ) )
+	{
+	    pACB = (PACB) psh->hostdata;
+	    if( !pACB_start )
+	    {
+		pACB_start = pACB;
+		pACB_current = pACB;
+		pACB->pNextACB = (PACB) -1;
+	    }
+	    else
+	    {
+		pACB_current->pNextACB = pACB;
+		pACB_current = pACB;
+		pACB->pNextACB = (PACB)  -1;
+	    }
+
+#ifdef DC390_DEBUG0
+	printk("DC390: pACB = %8x, pDCB_array = %8x, pSRB_array = %8x\n",
+	      (UINT) pACB, (UINT) pACB->DCB_array, (UINT) pACB->SRB_array);
+	printk("DC390: ACB size= %4x, DCB size= %4x, SRB size= %4x\n",
+	      sizeof(DC390_ACB), sizeof(DC390_DCB), sizeof(DC390_SRB) );
+#endif
+
+	}
+	else
+	{
+	    pSH_start = NULL;
+	    scsi_unregister( psh );
+	    return( -1 );
+	}
+	return( 0 );
+    }
+    else
+    {
+	printk("DC390_init: EEPROM reading error!\n");
+	return( -1 );
+    }
+}
+
+
+/***********************************************************************
+ * Function : int DC390_detect(Scsi_Host_Template *psht)
+ *
+ * Purpose : detects and initializes AMD53C974 SCSI chips
+ *	     that were autoprobed, overridden on the LILO command line,
+ *	     or specified at compile time.
+ *
+ * Inputs : psht - template for this SCSI adapter
+ *
+ * Returns : number of host adapters detected
+ *
+ ***********************************************************************/
+
+int
+DC390_detect(Scsi_Host_Template *psht)
+{
+#ifdef FOR_PCI_OK
+    UCHAR   pci_bus, pci_device_fn;
+    int     error = 0;
+    USHORT  chipType = 0;
+    USHORT  i;
+#endif
+
+    UCHAR   irq;
+    UCHAR   istatus;
+#ifndef VERSION_ELF_1_2_13
+    UINT    io_port;
+#else
+    ULONG   io_port;
+#endif
+    USHORT  adaptCnt = 0;	/* Number of boards detected */
+    USHORT  pci_index = 0;	/* Device index to PCI BIOS calls */
+    USHORT  MechNum, BusDevFunNum;
+    ULONG   wlval;
+
+#ifndef VERSION_ELF_1_2_13
+    psht->proc_dir = &proc_scsi_tmscsim;
+#endif
+
+    InitialTime = 1;
+    pSHT_start = psht;
+    pACB_start = NULL;
+
+    MechNum = 1;
+    for( ; (MechNum < 3) && (!adaptCnt); MechNum++)
+    {
+	BusDevFunNum = 0;
+	for (; adaptCnt < MAX_ADAPTER_NUM ;)
+	{
+	    if( !DC390_ToMech( MechNum, BusDevFunNum) )
+	    {
+		 wlval = DC390_inDword( MechNum, PCI_VENDOR_ID);
+		 if(wlval == ( (PCI_DEVICE_ID_AMD53C974 << 16)+
+				PCI_VENDOR_ID_AMD) )
+		 {
+		    io_port =DC390_inDword(MechNum,PCI_BASE_ADDRESS_0) & 0xFFFE;
+		    irq = DC390_inByte( MechNum, PCI_INTERRUPT_LINE);
+#ifdef DC390_DEBUG0
+		printk("DC390: IO_PORT=%4x,IRQ=%x,\n",(UINT) io_port, irq);
+#endif
+		    if( !DC390_init(psht, io_port, irq, pci_index, MechNum) )
+		    {
+			adaptCnt++;
+			pci_index++;
+			istatus = inb( (USHORT)io_port+INT_Status );	/* Reset Pending INT */
+#ifdef DC390_DEBUG0
+		printk("DC390: Mech=%2x,\n",(UCHAR) MechNum);
+#endif
+		    }
+		 }
+	    }
+	    if( BusDevFunNum != 0xfff8 )
+		BusDevFunNum += 8;	    /* next device # */
+	    else
+		break;
+	}
+    }
+
+#ifdef FOR_PCI_OK
+    if ( pcibios_present() )
+    {
+	for (i = 0; i < MAX_ADAPTER_NUM; ++i)
+	{
+	    if( !pcibios_find_device( PCI_VENDOR_ID_AMD,
+				PCI_DEVICE_ID_AMD53C974,
+				pci_index, &pci_bus, &pci_device_fn) )
+	    {
+		chipType = PCI_DEVICE_ID_AMD53C974;
+		pci_index++;
+	    }
+
+	    if( chipType )
+	    {
+
+		error = pcibios_read_config_dword(pci_bus, pci_device_fn,
+						  PCI_BASE_ADDRESS_0, &io_port);
+		error |= pcibios_read_config_byte(pci_bus, pci_device_fn,
+						  PCI_INTERRUPT_LINE, &irq);
+		if( error )
+		{
+		    printk("DC390_detect: reading configuration registers error!\n");
+		    InitialTime = 0;
+		    return( 0 );
+		}
+
+		(USHORT) io_port = (USHORT) io_port & 0xFFFE;
+#ifdef DC390_DEBUG0
+		printk("DC390: IO_PORT=%4x,IRQ=%x,\n",(UINT) io_port, irq);
+#endif
+		if( !DC390_init(psht, io_port, irq, i) )
+		    adaptCnt++;
+		chipType = 0;
+	    }
+	    else
+		break;
+	}
+    }
+#endif
+
+    InitialTime = 0;
+    adapterCnt = adaptCnt;
+    return( adaptCnt );
+}
+
+
+#ifndef VERSION_ELF_1_2_13
+
+/********************************************************************
+ * Function: tmscsim_set_info()
+ *
+ * Purpose: Set adapter info (!)
+ *
+ * Not yet implemented
+ *
+ *******************************************************************/
+
+int tmscsim_set_info(char *buffer, int length, struct Scsi_Host *shpnt)
+{
+  return(-ENOSYS);  /* Currently this is a no-op */
+}
+
+/********************************************************************
+ * Function: tmscsim_proc_info(char* buffer, char **start,
+ *			     off_t offset, int length, int hostno, int inout)
+ *
+ * Purpose: return SCSI Adapter/Device Info
+ *
+ * Input: buffer: Pointer to a buffer where to write info
+ *	  start :
+ *	  offset:
+ *	  hostno: Host adapter index
+ *	  inout : Read (=0) or set(!=0) info
+ *
+ * Output: buffer: contains info
+ *	   length; length of info in buffer
+ *
+ * return value: length
+ *
+ ********************************************************************/
+
+/* KG: proc_info taken from driver aha152x.c */
+
+#undef SPRINTF
+#define SPRINTF(args...) pos += sprintf(pos, ## args)
+
+#define YESNO(YN)\
+if (YN) SPRINTF(" Yes ");\
+else SPRINTF(" No  ")
+
+int tmscsim_proc_info(char *buffer, char **start,
+		      off_t offset, int length, int hostno, int inout)
+{
+  int dev, spd, spd1;
+  char *pos = buffer;
+  PSH shpnt;
+  PACB acbpnt;
+  PDCB dcbpnt;
+  unsigned long flags;
+/*  Scsi_Cmnd *ptr; */
+
+  acbpnt = pACB_start;
+
+  while(acbpnt != (PACB)-1)
+     {
+	shpnt = acbpnt->pScsiHost;
+	if (shpnt->host_no == hostno) break;
+	acbpnt = acbpnt->pNextACB;
+     }
+
+  if (acbpnt == (PACB)-1) return(-ESRCH);
+  if(!shpnt) return(-ESRCH);
+
+  if(inout) // Has data been written to the file ?
+    return(tmscsim_set_info(buffer, length, shpnt));
+
+  SPRINTF("Tekram DC390(T) PCI SCSI Host Adadpter, ");
+  SPRINTF("Driver Version 1.10, 1996/12/05\n");
+
+  save_flags(flags);
+  cli();
+
+  SPRINTF("SCSI Host Nr %i, ", shpnt->host_no);
+  SPRINTF("DC390 Adapter Nr %i\n", acbpnt->AdapterIndex);
+  SPRINTF("IOPortBase 0x%04x, ", acbpnt->IOPortBase);
+  SPRINTF("IRQLevel 0x%02x\n", acbpnt->IRQLevel);
+
+  SPRINTF("MaxID %i, MaxLUN %i, ",acbpnt->max_id, acbpnt->max_lun);
+  SPRINTF("AdapterID %i, AdapterLUN %i\n", acbpnt->AdaptSCSIID, acbpnt->AdaptSCSILUN);
+
+  SPRINTF("TagMaxNum %i, Status %i\n", acbpnt->TagMaxNum, acbpnt->status);
+
+  SPRINTF("Nr of attached devices: %i\n", acbpnt->DeviceCnt);
+
+  SPRINTF("Un ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs\n");
+
+  dcbpnt = acbpnt->pLinkDCB;
+  for (dev = 0; dev < acbpnt->DeviceCnt; dev++)
+     {
+      SPRINTF("%02i %02i  %02i ", dev, dcbpnt->UnitSCSIID, dcbpnt->UnitSCSILUN);
+      YESNO(dcbpnt->DevMode & PARITY_CHK_);
+      YESNO(dcbpnt->SyncMode & SYNC_NEGO_DONE);
+      YESNO(dcbpnt->DevMode & EN_DISCONNECT_);
+      YESNO(dcbpnt->DevMode & SEND_START_);
+      YESNO(dcbpnt->SyncMode & EN_TAG_QUEUING);
+      SPRINTF("  %03i ns ", (dcbpnt->NegoPeriod) << 2);
+      if (dcbpnt->SyncOffset & 0x0f)
+      {
+	 spd = 1000/(dcbpnt->NegoPeriod <<2);
+	 spd1 = 1000%(dcbpnt->NegoPeriod <<2);
+	 spd1 = (spd1 * 10)/(dcbpnt->NegoPeriod <<2);
+	 SPRINTF("   %2i.%1i M      %02i\n", spd, spd1, (dcbpnt->SyncOffset & 0x0f));
+      }
+      else SPRINTF("\n");
+      /* Add more info ...*/
+      dcbpnt = dcbpnt->pNextDCB;
+     }
+
+  restore_flags(flags);
+  *start = buffer + offset;
+
+  if (pos - buffer < offset)
+    return 0;
+  else if (pos - buffer - offset < length)
+    return pos - buffer - offset;
+  else
+    return length;
+}
+#endif /* VERSION_ELF_1_2_13 */
+
+
+#ifdef MODULE
+
+/***********************************************************************
+ * Function : static int DC390_shutdown (struct Scsi_Host *host)
+ *
+ * Purpose : does a clean (we hope) shutdown of the SCSI chip.
+ *	     Use prior to dumping core, unloading the driver, etc.
+ *
+ * Returns : 0 on success
+ ***********************************************************************/
+static int
+DC390_shutdown (struct Scsi_Host *host)
+{
+    UCHAR    bval;
+    USHORT   ioport;
+    unsigned long flags;
+    PACB pACB = (PACB)(host->hostdata);
+
+    ioport = (unsigned int) pACB->IOPortBase;
+
+    save_flags (flags);
+    cli();
+
+/*  pACB->soft_reset(host); */
+
+#ifdef DC390_DEBUG0
+    printk("DC390: shutdown,");
+#endif
+
+    bval = inb(ioport+CtrlReg1);
+    bval |= DIS_INT_ON_SCSI_RST;
+    outb(bval,ioport+CtrlReg1);  /* disable interrupt */
+    DC390_ResetSCSIBus( pACB );
+
+    restore_flags (flags);
+    return( 0 );
+}
+
+
+int DC390_release(struct Scsi_Host *host)
+{
+    int irq_count;
+    struct Scsi_Host *tmp;
+
+    DC390_shutdown (host);
+
+    if (host->irq != IRQ_NONE)
+    {
+	for (irq_count = 0, tmp = pSH_start; tmp; tmp = tmp->next)
+	{
+	    if ( tmp->irq == host->irq )
+		++irq_count;
+	}
+	if (irq_count == 1)
+	 {
+#ifdef DC390_DEBUG0
+	    printk("DC390: Free IRQ %i.",host->irq);
+#endif
+#ifndef VERSION_ELF_1_2_13
+	    free_irq(host->irq,NULL);
+#else
+	    free_irq(host->irq);
+#endif
+	 }
+    }
+
+    release_region(host->io_port,host->n_io_port);
+
+    return( 1 );
+}
+
+Scsi_Host_Template driver_template = DC390_T;
+#include "scsi_module.c"
+#endif /* def MODULE */
+

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen, slshen@lbl.gov