The following table outlines the current software revisions for gateways, terminal servers, and protocol translator. See transfer section below on how to ftp the images. NOTE: 8.1, 8.2 and 8.3 images are available concurrently. 8.2 and 8.3 images for CSC/2 processors exist only for execution from ROM due to memory limitations. Please be aware that support for 8.1 is no longer provided. NOTE: The STS-10 8.2 ROMs provides the 8.0(13) version features but has netbooting capability included. The ROMs are provided to permit users to netboot the STS-10X images which support full 8.2 terminal server features. Symbols: s - standard system software r - standard system software which executes out of ROM f - standard system software with cBus complex x - standard + Commercial/DDN X.25 software b - standard + Bridging software l - standard + LAT software p - standard + protocol translation CURRENT SOFTWARE VERSION LEVELS ************************** 8.2 ************************** Version image type # ROMs filename in bin directory number of ftp.cisco.com 8.2(7) CSC/3 gs3-f (8 ROMs) gs3-f.82-0007 -fx " gs3-fx.82-0007 -bf " gs3-bf.82-0007 -bfx " gs3-bfx.82-0007 8.2(7) tr3-x (8 ROMs) tr3-x.82-0007 8.2(7) pt3-lx " pt3-lx.82-0007 8.2(7) ts3-l (4 ROMs) ts3-l.82-0007 ts3-s " ts3-s.82-0007 8.2(7) CSC/2 gs2-r (8 ROMs) N/A -rx " N/A -br " N/A -brx " N/A 8.2(7) ts2-r (4 ROMs) N/A -lr (8 ROMs) N/A 8.2(7) tr2-rx (8 ROMs) N/A 8.2(7) pt2-lrx (8 ROMs) N/A 8.2(1) sts-s (2 ROMs) N/A (see above NOTE section) -l " N/A " 8.2(7) stsx-s (2 ROMs) stsx-s.82-0007 -l " stsx-l.82-0007 8.2(7) igs-s N/A igs-s.82-7 * igs-b N/A igs-b.82-7 * igs-x N/A igs-x.82-7 * * Please note that netbooting is only supported on the IGS when it is equipped with 4 MB of CPU RAM. igs-r (8 ROMs) N/A (ROM image) igs-br " N/A (ROM image) igs-rx " N/A (ROM image) igs-bprx " N/A (ROM image) Secondary Bootstraps for the STS10 and STS10X 8.2(7) boot-sts10 N/A boot-sts10.82-0007 boot-sts10x N/A boot-sts10x.82-0007 Version image type # ROMs filename in bin directory number of ftp.cisco.com 8.2(8) CSC/3 gs3-f (8 ROMs) gs3-f.82-0008 -fx " gs3-fx.82-0008 -bf " gs3-bf.82-0008 -bfx " gs3-bfx.82-0008 8.2(8) tr3-x (8 ROMs) tr3-x.82-0008 8.2(8) pt3-lx " pt3-lx.82-0008 8.2(8) ts3-l (4 ROMs) ts3-l.82-0008 ts3-s " ts3-s.82-0008 8.2(8) CSC/2 gs2-r (8 ROMs) N/A -rx " N/A -br " N/A -brx " N/A 8.2(8) ts2-r (4 ROMs) N/A -lr (8 ROMs) N/A 8.2(8) tr2-rx (8 ROMs) N/A 8.2(8) pt2-lrx (8 ROMs) N/A 8.2(8) sts-s (2 ROMs) N/A (see above NOTE section) -l " N/A " 8.2(8) stsx-s (2 ROMs) stsx-s.82-0008 -l " stsx-l.82-0008 8.2(8) igs-s N/A igs-s.82-8 * igs-b N/A igs-b.82-8 * igs-x N/A igs-x.82-8 * * Please note that netbooting is only supported on the IGS when it is equipped with 4 MB of CPU RAM. igs-r (8 ROMs) N/A (ROM image) igs-br " N/A (ROM image) igs-rx " N/A (ROM image) igs-bprx " N/A (ROM image) Secondary Bootstraps for the STS10 and STS10X 8.2(8) boot-sts10 N/A boot-sts10.82-0008 boot-sts10x N/A boot-sts10x.82-0008 ************************** 8.3 ************************** Version System Description # of ROMs Image filename 8.3(1) GS3 CSC/3 Gateway Server Sets: GS3-F 8 gs3-f.83-1 GS3-BF 8 gs3-bf.83-1 GS3-FX 8 gs3-fx.83-1 GS3-BFX 8 gs3-bfx.83-1 8.3(1) GS2 CSC/2 Gateway Server Sets: GS2-R 8 N/A GS2-BR 8 N/A GS2-RX 8 N/A GS2-BRX 8 N/A 8.3(1) TR3 CSC/3 TRouter Sets: TR3-X 8 tr3-x.83-1 8.3(1) TR2 CSC/2 TRouter Sets: TR2-RX 8 N/A 8.3(1) IGS IGS Server Sets: IGS-S N/A igs-s.83-1 IGS-B N/A igs-b.83-1 IGS-X N/A igs-x.83-1 IGS-BPX N/A igs-bpx.83-1 IGS-BX N/A igs-bx.83-1 IGS-R 8 N/A IGS-BR 8 N/A IGS-RX 8 N/A IGS-BPRX 8 N/A IGS-BRX 8 N/A 8.3(1) PT2 CSC/2 Protocol Translator Set: PT2-LRX 8 N/A 8.3(1) PT3 CSC/3 Protocol Translator Set: PT3-LX 8 pt3-lx.83-1 8.3(1) TS3 CSC/3 Terminal Server Sets: TS3-X 8 ts3-x.83-1 TS3-S 8 ts3-s.83-1 TS3-L 8 ts3-l.83-1 8.3(1) TS2 CSC/2 Terminal Server Sets: TS2-R 8 N/A TS2-LR 8 N/A 8.3(1) STS-10x Extended Small Terminal Server Sets: STSX-R 2 N/A STSX-LR 2 N/AA Version image type # ROMs filename in bin directory number of ftp.cisco.com 8.3(3) GS3 CSC/3 Gateway Server Sets: GS3-F 8 gs3-f.83-3 GS3-BF 8 gs3-bf.83-3 GS3-FX 8 gs3-fx.83-3 GS3-BFX 8 gs3-bfx.83-3 8.3(3) GS2 CSC/2 Gateway Server Sets: GS2-R 8 N/A GS2-BR 8 N/A GS2-RX 8 N/A GS2-BRX 8 N/A 8.3(3) TR3 CSC/3 TRouter Sets: TR3-X 8 tr3-x.83-3 8.3(3) TR2 CSC/2 TRouter Sets: TR2-RX 8 N/A 8.3(3) IGS IGS Server Sets: IGS-S N/A igs-s.83-3 IGS-B N/A igs-b.83-3 IGS-X N/A igs-x.83-3 IGS-BPX N/A igs-bpx.83-3 IGS-BX N/A igs-bx.83-3 IGS-R 8 N/A IGS-BR 8 N/A IGS-RX 8 N/A IGS-BPRX 8 N/A IGS-BRX 8 N/A 8.3(3) PT2 CSC/2 Protocol Translator Set: PT2-LRX 8 N/A 8.3(3) PT3 CSC/3 Protocol Translator Set: PT3-LX 8 pt3-lx.83-3 8.3(3) TS3 CSC/3 Terminal Server Sets: TS3-X 8 ts3-x.83-3 TS3-S 8 ts3-s.83-3 TS3-L 8 ts3-l.83-3 8.3(3) TS2 CSC/2 Terminal Server Sets: TS2-R 8 N/A TS2-LR 8 N/A 8.3(3) STS-10x Extended Small Terminal Server Sets: STSX-R 2 N/A STSX-LR 2 N/A Version image type # ROMs filename in bin directory number of ftp.cisco.com 8.3(5) GS3 CSC/3 Gateway Server Sets: GS3-F 8 gs3-f.83-5 GS3-BF 8 gs3-bf.83-5 GS3-FX 8 gs3-fx.83-5 GS3-BFX 8 gs3-bfx.83-5 8.3(5) GS2 CSC/2 Gateway Server Sets: GS2-R 8 N/A GS2-BR 8 N/A GS2-RX 8 N/A GS2-BRX 8 N/A 8.3(5) TR3 CSC/3 TRouter Sets: TR3-X 8 tr3-x.83-5 8.3(5) TR2 CSC/2 TRouter Sets: TR2-RX 8 N/A 8.3(5) IGS IGS Server Sets: IGS-S N/A igs-s.83-5 IGS-B N/A igs-b.83-5 IGS-X N/A igs-x.83-5 IGS-BPX N/A igs-bpx.83-5 IGS-BX N/A igs-bx.83-5 IGS-R 8 N/A IGS-BR 8 N/A IGS-RX 8 N/A IGS-BPRX 8 N/A IGS-BRX 8 N/A 8.3(5) PT2 CSC/2 Protocol Translator Set: PT2-LRX 8 N/A 8.3(5) PT3 CSC/3 Protocol Translator Set: PT3-LX 8 pt3-lx.83-5 8.3(5) TS3 CSC/3 Terminal Server Sets: TS3-X 4 ts3-x.83-5 TS3-S 4 ts3-s.83-5 TS3-L 4 ts3-l.83-5 8.3(5) TS2 CSC/2 Terminal Server Sets: TS2-R 8 N/A TS2-LR 8 N/A 8.3(5) STS-10x Extended Small Terminal Server Sets: STSX-R 2 N/A STSX-LR 2 N/A ------------------------- To transfer software images: The files in the bin directory are retrieved in the following manner: 1) Be sure to set up data transfer to binary mode. Usually "binary" will do it. 2) First connect to the "bin" directory in your FTP software. Usually "cd bin" will do it. 3) Expand the filename of your choice, using the method shown below. But when retrieving the file do NOT specify "bin/" before it. For example, to retrieve gateway server (router) software with x.25 support, first connect to "bin" and then retrieve: gs2-x.81-0025 and *not* bin/gs2-x.81-0025 NOTE: You must have ROMs that support the software load being booted. For example, you cannot get X.25 support in a router with "gs2-b" ROMs by booting a "gs2-bx" image.